Replasticizing hop balls

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #31
    Re: Replasticizing hop balls

    Very impressed!

    Comment

    • Guest

      #32
      Re: Replasticizing hop balls

      Great Space Hopper's usable size is now a bit over 24" diameter and almost 27" high btw the horns, but with plenty of bounce.

      It looks like an inch of useable increase is all one can expect from softening this old thick vinyl, but that's impressively big so the Space Hopper phase of the experiment is over. New thinner balls should easily balloon out with ATBC and stretching (I leave that to others, they hold no interest for me).

      Next up: a true original (1968) Hoppity Hop that should arrive next week. I will push this one to the absolute max
      Last edited by Guest; 26-07-2021, 11:46.

      Comment

      • Guest

        #33
        Re: Replasticizing hop balls

        Change of plan. Today a different British hopper arrived unexpectedly. Pic below is the ball freshly scrubbed and squeaky clean (it was filthy and stained from being stored in a shed since the '70s). Here you see it soaking up the first of many coats of ATBC.

        Measuring tape is at my GFs and the odd egg shape favored by the Brits throws off my eye, but I'm guessing its about 20" diameter atm. Funny thing is, this vinyl is thinner than the GSH yet very flexible and truly rubbery for its age, so I am hopeful it will take well to careful chem/heat stretching.
        Attached Files
        Last edited by Guest; 27-07-2021, 20:30.

        Comment

        • Guest

          #34
          Re: Replasticizing hop balls

          Correction: ball is 21.5" diameter and 24" tall at the base of the handle. This means that before any stretching, it's already larger than the HH or the regular orange SH were out of the box. So...this is a very good sign.

          Can it catch up to the stretched GSH? Stay tuned!
          Last edited by Guest; 27-07-2021, 21:08.

          Comment

          • Guest

            #35
            Re: Replasticizing hop balls

            Removed the brass tire valve and rubbed two bottles of Sculpey into the inside. Warmed in hot water then reinflated, it measures only slightly bigger than before but has already gotten rounder since the last pic. This vinyl feels more like thick rubber than any old hopper I've seen. Very springy. It actually feels closer to modern thin-walled hoppers, yet more substantial.
            Attached Files
            Last edited by Guest; 27-07-2021, 21:59.

            Comment

            • Guest

              #36
              Re: Replasticizing hop balls

              I let out some air because it was very hard but in this pic it got to 23" diameter (bench bars are 24" apart) and 26" at base of handle (basically the seat). It's catching up with the GSH, and the ATBC has only been soaking into it for about 2 hours.
              Attached Files
              Last edited by Guest; 27-07-2021, 22:39. Reason: forgot photo

              Comment

              • Guest

                #37
                Re: Replasticizing hop balls

                It spontaneously popped on its own late last night. It wasn't even completely full and tight and was just sitting in a corner. But I had noticed the vinyl was visibly thin in between the ribs around the middle, and sure enough, it split halfway around the circumference. This goes along with the old reports I found that there were warranty issues with this ball -- people complained that it would split at the seam and demanded their money back. This is what they were talking about.

                Up next, the original 1968 HH (first one I experimented with above was a later 1970s or 80s issue).
                Last edited by Guest; 28-07-2021, 13:50.

                Comment

                • Guest

                  #38
                  Re: Replasticizing hop balls

                  1968 Hoppity Hop arrived yesterday. It was filthier from storage than the UK hopper mentioned earlier so it underwent a soapy scrub, rinse, left to dry, then coated in and out with ATBC. At that point I put it in a plastic bag and laid it in a warmed clothes dryer to soak in the heat.

                  This morning I ran it a few times in the dryer on low (weather has been cooler than usual here lately). The vinyl now has its original tacky, rubbery feel that the later orange HH did not, since at some point Sun changed the PVC formula. Also, the color of the original is a deeper, darker red than later issues (not sure about the original blue and I've never seen an original yellow).

                  Next will be a series of very gradual inflations between heat soaks in the back of the car.

                  For anyone interested, attached are two pics for identifying the original HH as opposed to later ones. The surest sign, besides color, is small outline font of the name versus the larger solid block print on later balls. Also the Patent Applied For notice on the back.
                  Attached Files
                  Last edited by Guest; 30-07-2021, 13:16.

                  Comment

                  • Guest

                    #39
                    Re: Replasticizing hop balls

                    22" diameter. It's spending most of the day in the back of a hot car.

                    Comment

                    • Guest

                      #40
                      Re: Replasticizing hop balls

                      1968 HH is at 22.2" circumference. Pinholes developed which took me a week to repair but it seems to be holding. Will begin careful stretching.

                      Comment

                      • Guest

                        #41
                        Re: Replasticizing hop balls

                        Pink version of the 4 handled British hopper arrived today. Out of the box reaches its rated 19" diameter and 20" high at the seat with the same springy bounce. But as it's in better condition than the orange one that popped on its own, I'm going to take a lot more time stretching this one (I now know where the weakness is).

                        It's been dosed inside and out and will heat soak, inflated to just rounding it out, for a couple weeks before I try anything with it.
                        Last edited by Guest; 04-02-2023, 20:08.

                        Comment

                        • Guest

                          #42
                          Re: Replasticizing hop balls

                          Changed my mind. I'm learning to appreciate the egg shape over the usual sphere. It's now 21" diameter and 24" high at the seat. It's got the firm bounce I like but still plenty flexible. The added height vs width makes it a little less stable and more tricky to ride that a HH or SH, but that makes it fun. Orange is the first one that popped.
                          Attached Files
                          Last edited by Guest; 04-02-2023, 20:08.

                          Comment

                          • Guest

                            #43
                            Re: Replasticizing hop balls

                            The four handled balls are great because they are thinly molded compared with HH and SH, making them unusually bouncy and fun to ride, but which is also the problem when they age. This one popped as well. Lesson learned: ATBC will weaken ANY existing weak point (even surface scratches) causing them to rupture when inflated.

                            The more rugged HH soaked up plasticizer for over a month. It's now a solid 24" high and around with just the right combo of stiffness and bounce...not at all the unsatisfying "slightly underinflated balloon" flabby feel like cheap modern hoppers and gymballs have, but substantial and very resilient. Comparable to the Great Space Hopper but just a hair bigger now.
                            Last edited by Guest; 18-10-2021, 22:10.

                            Comment

                            • Unicks
                              Senior Member
                              • Nov 2020
                              • 103

                              #44
                              Re: Replasticizing hop balls

                              Hey Merl - Where are you getting your ATBC from? Reason I ask is because it seems you are getting the results of solvents or something similar.

                              I have the CanDo 105cm blue ball still, it's been deflated a couple times and remains just as tough as the day I first inflated it... it's much softer, even more so over the last couple months -but I've attributed it to use. Fully inflated, it's about as firm as a balloon is when at it's rated size.. not alot of having to fight and find the sweet spot when sitting on it, so the elasticity is definitely better.

                              U

                              Comment

                              • Guest

                                #45
                                Re: Replasticizing hop balls

                                Sculpey! I think it's the lighter formulation used in those particular balls, which are thinner walled than the HH. I suspect they were a cheaper, knock off competitor, which explains the consumer complaints they received.

                                I did get the same self-destruct some weeks ago from the original red HH. It was well used and had gouges in it that held up to bouncing before adding ATBC. Within days the gouges developed pinholes that could not be patched. But my current HH and GSH, both unscratched, are holding up just fine.
                                Last edited by Guest; 19-10-2021, 00:43.

                                Comment

                                Working...