Overview of Hoppers
Collapse
X
-
-
Guest -
Guest
first in a series of reviews
RINCO 36” Knobby Bouncy Ball with Handle
Color: varies, red/orange/yellow/blue/purple/green and more
Handle: closed rectangular loop
Texturing: smooth with rubber knobby bumps
Inflation type: plug hole
Size: 36” max
Released: 2006 (estimate)
Availability: still in production and can be found on Amazon, eBay, etc.
This hopper is a bit cumbersome with the size for good hopping. The knobby texture may seem unpleasant to some folks but I don’t mind. Good for sitting and bouncing or rolling around on. Not great rebound but more of a soft, rubbery feel. Would not inflate to full 36” diameter because the ball develops weak spots at the base of the knobs when inflated that much. Plug is not near the top or bottom - it is in the middle of the ball. Good placement since bottom placement leads to plug damage eventually. Plug difficult to remove the first couple of times and need to be careful to not damage the ball during plug removal. I found a set of blunt nose pliers and firm, slow pulling worked for plug removal. It is a fun ball, however there are much better hoppers for bouncing around other than stationary.Comment
-
Guest
HOP Fit by empower
Color: blue
Handle: unusual mushroom shape with stem supported by a foam block
Texturing: smooth with a very slight texture (eg matte and not shiny)
Inflation type: plug hole in middle of ball (not top or bottom)
Size: 28” ball with 8” tall handle
Released: 2019 (estimate)
Availability: still in production and can be found on Amazon, eBay, etc.
This hopper is a size for good hopping. Good overall ball. Not thrilled with the handle, but durable and good rebound. Comes with plug, video, plug removal tool, pump, measuring tape for circumference, foam covered in black fabric comfort collar. Good for forward hopping or stationary bouncing. A good firmness but not too hard either.Comment
-
Guest -
Guest -
Guest
OUNCES OF BOUNCES
Colors: red, blue, pink
Handle: a welded-on loop
Texturing: pebbled
Inflation type: plug hole
Size: 14-16" diameter
Released: late 1990s
Availability: out of production, thankfully
Probably the worst hopper ever, it's literally a heavier gauge vinyl beachball with a handle. Not rotomolded, it's made from welded panels with questionable seams...
Screenshot_20240123_214727_eBay.jpg
Would make an okay water buoy, or an actual beachball, but as a hopper it would be worthless even if 10 inches bigger. Makes the cheapest Chinese hoppers look excellent.
Comment
-
Wow...what a truly awful hopper!..I wouldn't want to bounce on it, let alone inflate it..might be OK for other uses..but probably wouldn't take the abuse
Comment
-
I've seen pics, but didn't know anyone who actually had one!HOP Fit by empower
Color: blue
Handle: unusual mushroom shape with stem supported by a foam block
Texturing: smooth with a very slight texture (eg matte and not shiny)
Inflation type: plug hole in middle of ball (not top or bottom)
Size: 28” ball with 8” tall handle
Released: 2019 (estimate)
Availability: still in production and can be found on Amazon, eBay, etc.
This hopper is a size for good hopping. Good overall ball. Not thrilled with the handle, but durable and good rebound. Comes with plug, video, plug removal tool, pump, measuring tape for circumference, foam covered in black fabric comfort collar. Good for forward hopping or stationary bouncing. A good firmness but not too hard either.Comment
-
Guest
Comment
-
Guest
Senior Hopper
Color: red
Handle: twin bunny ears (no, really)
Texturing: smooth
Inflation type: plug hole
Size: 28"
Released: unknown
Availability: still in production in Australia
A big Australian hopper made by Loumet, this one most closely resembles the original hopper, the Ride-A-Roo. It is fully adult sized, slightly taller than around, and is made of fairly heavy guage vinyl. It is a simple design but is NOT cheaply made. The odd thing is the huge Bugs Bunny shaped "ears," but apart from that it's easily one of the best hoppers ever produced. Highly recommended, but getting one sent from Australia isn't easy or cheap.
Screenshot_20240709_144349_Brave.jpgComment
-
Looks like quite a heavy hopper...and probably one that even the manufacturers recommend is always pumped up..Senior Hopper
Color: red
Handle: twin bunny ears (no, really)
Texturing: smooth
Inflation type: plug hole
Size: 28"
Released: unknown
Availability: still in production in Australia
A big Australian hopper made by Loumet, this one most closely resembles the original hopper, the Ride-A-Roo. It is fully adult sized, slightly taller than around, and is made of fairly heavy guage vinyl. It is a simple design but is NOT cheaply made. The odd thing is the huge Bugs Bunny shaped "ears," but apart from that it's easily one of the best hoppers ever produced. Highly recommended, but getting one sent from Australia isn't easy or cheap.
Screenshot_20240709_144349_Brave.jpgComment
-
It also looks like they do a smaller size version of that using the same gauge of vinyl..
Looking at the stats, the 'senior hopper' is 260cm circumference...I'm not going to rate my maths on this, but it's got to be a decent sized beastie!Comment
-
Guest -
Comment
Comment