Overview of Hoppers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Spacehopper
    Hopper
    • Mar 2021
    • 110

    #16
    Originally posted by frenchy
    Anyone ever use a guffhopper? See picture IMG_1418.jpg
    Still got mine..they overinflate a bit, and aren't a bad ride..the fart unit died years ago, so I chucked it

    Comment

    • Guest

      #17
      the fart unit died years ago
      Hate it when that happens.

      Comment

      • Guest

        #18
        first in a series of reviews

        RINCO 36” Knobby Bouncy Ball with Handle

        Color: varies, red/orange/yellow/blue/purple/green and more
        Handle: closed rectangular loop
        Texturing: smooth with rubber knobby bumps
        Inflation type: plug hole
        Size: 36” max
        Released: 2006 (estimate)
        Availability: still in production and can be found on Amazon, eBay, etc.

        This hopper is a bit cumbersome with the size for good hopping. The knobby texture may seem unpleasant to some folks but I don’t mind. Good for sitting and bouncing or rolling around on. Not great rebound but more of a soft, rubbery feel. Would not inflate to full 36” diameter because the ball develops weak spots at the base of the knobs when inflated that much. Plug is not near the top or bottom - it is in the middle of the ball. Good placement since bottom placement leads to plug damage eventually. Plug difficult to remove the first couple of times and need to be careful to not damage the ball during plug removal. I found a set of blunt nose pliers and firm, slow pulling worked for plug removal. It is a fun ball, however there are much better hoppers for bouncing around other than stationary.

        Comment

        • Guest

          #19
          HOP Fit by empower

          Color: blue
          Handle: unusual mushroom shape with stem supported by a foam block
          Texturing: smooth with a very slight texture (eg matte and not shiny)
          Inflation type: plug hole in middle of ball (not top or bottom)
          Size: 28” ball with 8” tall handle
          Released: 2019 (estimate)
          Availability: still in production and can be found on Amazon, eBay, etc.

          This hopper is a size for good hopping​. Good overall ball. Not thrilled with the handle, but durable and good rebound. Comes with plug, video, plug removal tool, pump, measuring tape for circumference, foam covered in black fabric comfort collar. Good for forward hopping or stationary bouncing. A good firmness but not too hard either.

          Comment

          • Guest

            #20
            The foam block is to be gripped between the thighs for hands free hopping?

            Comment

            • Guest

              #21
              Merl - exactly

              Comment

              • Guest

                #22
                OUNCES OF BOUNCES
                Colors: red, blue, pink
                Handle: a welded-on loop
                Texturing: pebbled
                Inflation type: plug hole
                Size: 14-16" diameter
                Released: late 1990s
                Availability: out of production, thankfully

                Probably the worst hopper ever, it's literally a heavier gauge vinyl beachball with a handle. Not rotomolded, it's made from welded panels with questionable seams...

                Screenshot_20240123_214727_eBay.jpg

                Would make an okay water buoy, or an actual beachball, but as a hopper it would be worthless even if 10 inches bigger. Makes the cheapest Chinese hoppers look excellent.
                ​

                Comment

                • Spacehopper
                  Hopper
                  • Mar 2021
                  • 110

                  #23
                  Originally posted by Merl
                  OUNCES OF BOUNCES
                  Colors: red, blue, pink
                  Handle: a welded-on loop
                  Texturing: pebbled


                  Would make an okay water buoy, or an actual beachball, but as a hopper it would be worthless even if 10 inches bigger. Makes the cheapest Chinese hoppers look excellent.
                  ​
                  Wow...what a truly awful hopper!..I wouldn't want to bounce on it, let alone inflate it..might be OK for other uses..but probably wouldn't take the abuse

                  Comment

                  • Spacehopper
                    Hopper
                    • Mar 2021
                    • 110

                    #24
                    Originally posted by frenchy
                    HOP Fit by empower

                    Color: blue
                    Handle: unusual mushroom shape with stem supported by a foam block
                    Texturing: smooth with a very slight texture (eg matte and not shiny)
                    Inflation type: plug hole in middle of ball (not top or bottom)
                    Size: 28” ball with 8” tall handle
                    Released: 2019 (estimate)
                    Availability: still in production and can be found on Amazon, eBay, etc.

                    This hopper is a size for good hopping​. Good overall ball. Not thrilled with the handle, but durable and good rebound. Comes with plug, video, plug removal tool, pump, measuring tape for circumference, foam covered in black fabric comfort collar. Good for forward hopping or stationary bouncing. A good firmness but not too hard either.
                    I've seen pics, but didn't know anyone who actually had one!

                    Comment

                    • Guest

                      #25
                      Originally posted by Spacehopper

                      I've seen pics, but didn't know anyone who actually had one!
                      I have one too. Not my favorite but it's pretty good

                      Comment

                      • Guest

                        #26
                        Senior Hopper
                        Color: red
                        Handle: twin bunny ears (no, really)
                        Texturing: smooth
                        Inflation type: plug hole
                        Size: 28"
                        Released: unknown
                        Availability: still in production in Australia

                        A big Australian hopper made by Loumet, this one most closely resembles the original hopper, the Ride-A-Roo. It is fully adult sized, slightly taller than around, and is made of fairly heavy guage vinyl. It is a simple design but is NOT cheaply made. The odd thing is the huge Bugs Bunny shaped "ears," but apart from that it's easily one of the best hoppers ever produced. Highly recommended, but getting one sent from Australia isn't easy or cheap.
                        Screenshot_20240709_144349_Brave.jpg

                        Comment

                        • Spacehopper
                          Hopper
                          • Mar 2021
                          • 110

                          #27
                          Originally posted by Merl
                          Senior Hopper
                          Color: red
                          Handle: twin bunny ears (no, really)
                          Texturing: smooth
                          Inflation type: plug hole
                          Size: 28"
                          Released: unknown
                          Availability: still in production in Australia

                          A big Australian hopper made by Loumet, this one most closely resembles the original hopper, the Ride-A-Roo. It is fully adult sized, slightly taller than around, and is made of fairly heavy guage vinyl. It is a simple design but is NOT cheaply made. The odd thing is the huge Bugs Bunny shaped "ears," but apart from that it's easily one of the best hoppers ever produced. Highly recommended, but getting one sent from Australia isn't easy or cheap.
                          Screenshot_20240709_144349_Brave.jpg
                          Looks like quite a heavy hopper...and probably one that even the manufacturers recommend is always pumped up..

                          Comment

                          • Spacehopper
                            Hopper
                            • Mar 2021
                            • 110

                            #28
                            It also looks like they do a smaller size version of that using the same gauge of vinyl..

                            Looking at the stats, the 'senior hopper' is 260cm circumference...I'm not going to rate my maths on this, but it's got to be a decent sized beastie!

                            Comment

                            • Guest

                              #29
                              It is!

                              Comment

                              • Spacehopper
                                Hopper
                                • Mar 2021
                                • 110

                                #30
                                Originally posted by Merl
                                It is!
                                Guessing you've got one...or know someone with one?.....need pics!!, if you have! :-)

                                Comment

                                Working...