Well, good to be back, after two eye operations, I feel I can get back into a normal life routine. Over the last few months, this has given me the opportunity to engage regularly with a sourcing agency in Hong Kong, who are at the present, assisting me to find a PVC fabrication plant, and good news is they are two possibilities. They both produce PVC plastic in line with the 6P reach standard, but can alter the formulation on request and not worry about any certificates or any of that other nanny shit. This is only the start of the search, so other possibilities may come up during the scouting job.
One of the manufacturers is happy to use DEHP or DOP in their formulation, but is asking for actual data sheets of percentages. I wouldn't know where to find such material, as I would suspect such documentation would be long gone, particularly if it's from the 80s and early 90s.
Secondly I'm rather curious about the insistency of the thickness of 0.20mm, as I've generally requested 0.10 to 0.15. I always understood the strength of an inflatables was in it's seams, and as long as it is not being thrown around in an environment that has sharp objects, that such a thin formulation would be fine.
Also when doing a tear down of one of my beach balls that already had formed some pin-hole leaks. I found that the plastic was glossy on the outside and matte on the inside.
I'm pretty sure that in the olden days, the agents that were added on PVCs to make them softer and shinier were added on both sides of the PVC, which resulted in both sides being shiny, and thus more perceived translucency. I would surmise by the mid to late 90s, that this would have only been added on one side to save on fabrication costs. Would this be a fair conclusion to draw?
I've haven't said much of late, because usually when I have something in the pipeline, there is usually a snag that kind of puts everything in the shitter. Over the last ten months it was my health. But now with a recent royalty windfall, I feel now I have some space to finally get the custom inflates I want. hopefully if the desired factory and materials are found, I would gladly pass this info on once I know I can vouch for their product and quality.
Hongyi has been mentioned several times on here, but just have a gut feeling that if I purchased one of their items, that metaphorically I'll be getting a thick clump of PVC in the post, my turn on is when inflatables are more thinner and have a sense of fragility about them.
One of the manufacturers is happy to use DEHP or DOP in their formulation, but is asking for actual data sheets of percentages. I wouldn't know where to find such material, as I would suspect such documentation would be long gone, particularly if it's from the 80s and early 90s.
Secondly I'm rather curious about the insistency of the thickness of 0.20mm, as I've generally requested 0.10 to 0.15. I always understood the strength of an inflatables was in it's seams, and as long as it is not being thrown around in an environment that has sharp objects, that such a thin formulation would be fine.
Also when doing a tear down of one of my beach balls that already had formed some pin-hole leaks. I found that the plastic was glossy on the outside and matte on the inside.
I'm pretty sure that in the olden days, the agents that were added on PVCs to make them softer and shinier were added on both sides of the PVC, which resulted in both sides being shiny, and thus more perceived translucency. I would surmise by the mid to late 90s, that this would have only been added on one side to save on fabrication costs. Would this be a fair conclusion to draw?
I've haven't said much of late, because usually when I have something in the pipeline, there is usually a snag that kind of puts everything in the shitter. Over the last ten months it was my health. But now with a recent royalty windfall, I feel now I have some space to finally get the custom inflates I want. hopefully if the desired factory and materials are found, I would gladly pass this info on once I know I can vouch for their product and quality.
Hongyi has been mentioned several times on here, but just have a gut feeling that if I purchased one of their items, that metaphorically I'll be getting a thick clump of PVC in the post, my turn on is when inflatables are more thinner and have a sense of fragility about them.
(this would have really helped by a long way if I got this cooperation, but at this stage the lack of this info remains to be the main obstruction to moving forward.
Comment