two bags welded together. any ideas?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AlexinoMaxx
    Junior Member
    • Aug 2021
    • 14

    two bags welded together. any ideas?

    i found large ldpe bags measured 2000 x 2400 MM. However it would be IMPRACTICAL to tie one at the end, would look ugly and hard to use with all the folds coming from tying the bag.

    So i thought maybe i can weld two of them together, cut one corner of the bag, stick a valve to it and make a GIANT ride roll.

    Now why would i do this?

    -my country does not have those 45"-60" balloons which i really want
    -international delivery is expensive and takes a long time
    -i'm not into animal shaped inflatables
    -ldpe doesn't weaken after a couple inflations, so it's more reliable than balloons

    What i don't like about this is that it won't shine or have that nice glossy balloon texture. Also it won't be as bouncy.

    Here is a rough sketch of what i have in mind:



    I calculated the diameter while inflated to be around 127 cm!
    The problem is i don't know what adhesive i can use, because ldpe has a low surface energy, and they won't bond that easily. Also i need an adhesive that is elastic or flexible, one that doesn't become rock hard after drying, like hot glue.
    Or i can form a seam with a heating iron, but it's risky as it will deform the ldpe, form holes, and burn.

    I heard some glues work on ldpe, but i am not sure which ones are good. So what methods are there to make two bags stick to eachother and be able to withstand high pressure?
    Bounce on a trampoline and no one bats an eye.
    Bounce on a balloon and society loses their mind.
  • glovepopper
    Senior Member
    • May 2019
    • 390

    #2
    Re: two bags welded together. any ideas?

    Hi guys, I tried sealing a plastic bag with duct tape and it works better than I expected - see attachment.
    Attached Files

    Comment

    • poppinbags
      Member
      • Nov 2017
      • 45

      #3
      Re: two bags welded together. any ideas?

      That looks great! Even a beachball valve attached to blow it up!

      Comment

      • georgebayer_1
        Senior Member
        • Jan 2015
        • 197

        #4
        Re: two bags welded together. any ideas?

        Originally posted by glovepopper
        Hi guys, I tried sealing a plastic bag with duct tape and it works better than I expected - see attachment.
        That's great! Do You have more pictures of the bag? I'd love to blow a big bag till it pops and this can be a perfect solution

        Comment

        • glovepopper
          Senior Member
          • May 2019
          • 390

          #5
          Re: two bags welded together. any ideas?

          I use foil sleeves to make these things. I'm posting more photos. Previously I closed the ends using rubber bands, but it was less effective...
          Attached Files

          Comment

          • georgebayer_1
            Senior Member
            • Jan 2015
            • 197

            #6
            Re: two bags welded together. any ideas?

            Originally posted by glovepopper
            I use foil sleeves to make these things. I'm posting more photos. Previously I closed the ends using rubber bands, but it was less effective...
            Many thanks for the pictures How did You fixed the valve to the bag? Also with a tape? I'd love to have an huuuuuge inflatable bag with a valve from an inflatable

            Comment

            • georgebayer_1
              Senior Member
              • Jan 2015
              • 197

              #7
              Re: two bags welded together. any ideas?

              Originally posted by AlexinoMaxx
              i found large ldpe bags measured 2000 x 2400 MM. ...
              Where did You buy Your 2000 x 2400 mm huuuge bags? I'd also love to have some

              Comment

              • glovepopper
                Senior Member
                • May 2019
                • 390

                #8
                Re: two bags welded together. any ideas?

                Originally posted by georgebayer_1
                Many thanks for the pictures How did You fixed the valve to the bag? Also with a tape? I'd love to have an huuuuuge inflatable bag with a valve from an inflatable
                Yes, I used double-sided adhesive tape and fixed the valve on the inside of the bag.
                Attached Files

                Comment

                • balloonPatcher
                  Senior Member
                  • Jun 2020
                  • 291

                  #9
                  Re: two bags welded together. any ideas?

                  An interesting video by heath Dragon on you tube on welding vinyl seams.

                  Comment

                  • glovepopper
                    Senior Member
                    • May 2019
                    • 390

                    #10
                    Re: two bags welded together. any ideas?

                    Since I wasn't completely satisfied with the duct tape sealing, I bought the cheapest (12€) electric foil welder today, with a welding width of up to 30cm. Due to the limitation of the weld length to 30cm, and the foil sleeve is 60 cm wide, I had to make an octagonal paterns at the both ends. After inflating it doesn't look too bad... See attachments.
                    Attached Files
                    Last edited by glovepopper; 05-09-2023, 18:03.

                    Comment

                    • georgebayer_1
                      Senior Member
                      • Jan 2015
                      • 197

                      #11
                      Re: two bags welded together. any ideas?

                      Today, I received a package of 1000 x 1500 mm plastic bags. I coudn't resist and must inflate one nice and tight


                      Comment

                      • glovepopper
                        Senior Member
                        • May 2019
                        • 390

                        #12
                        Re: two bags welded together. any ideas?

                        Originally posted by georgebayer_1
                        Today, I received a package of 1000 x 1500 mm plastic bags. I coudn't resist and must inflate one nice and tight
                        Do they hold your weight when you sit or lie down on them?

                        Comment

                        • georgebayer_1
                          Senior Member
                          • Jan 2015
                          • 197

                          #13
                          Re: two bags welded together. any ideas?

                          Originally posted by glovepopper
                          Do they hold your weight when you sit or lie down on them?
                          Not much. I inflated one to the max, hoping to build a nice bulge, as an overinflated bag usually does. There was no bulge on the side and the material simply rised in the middle (not in the weld). It's only 50 µm thick material. But I can lay down on it partially, e.g. with chest or legs. But I think if I combine two or three in each other, there won't be any problem

                          Comment

                          • aaryan026
                            Junior Member
                            • Dec 2022
                            • 7

                            #14
                            Re: two bags welded together. any ideas?

                            Nice looks and design.

                            Comment

                            Working...