Inflatables blown super tight or till they pop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • marvin19
    Member
    • May 2026
    • 51

    Originally posted by RLMI

    WOw, just amazing! Was your intention to blow up the ring till it burst, or did you want to fill it up tightly? It got huge - must have taken a lot of time and exertion!
    Hi RLMI,
    I definitely wanted to blow that one to burst. This bestway stretched much further than the usual 119cm rings and resisted a lot. It took me about 20min to blow it to pop right from the package (I'm not the fastest).
    Saw your great inflatables in this thread and how you carefully stretch them as tight as possible. Unfortunately, I'm not so into prestretching or extreme-stretching. I'm the classical B2Popper and absolutely love to blow to burst huge balloons with determination in front of my eyes. I also b2p inflatables from time to time (unused and unstretched), but not often, mostly swimrings and pool pillows, which I like a lot for bursting because they really bulge and take a lot of blows, if you support the seams with tape.
    BTW: did you ever try to stretch a pool pillow? Would be interesting to see what you can make out of it. Never mind: have a lot of fun with your fantastic selection of pool toy inflatables!

    Bye, Marvin
    b2p-poolpillow-infactory.jpg

    Comment

    • Ladyloonerlover
      Lover Of Mouth Inflation
      • Mar 2014
      • 372

      Originally posted by marvin19

      Hi Hellus,

      from time to time, I also blow swim rings until the seems rip. Once I blew a Bestway 119cm that is not so different from yours - some comparison possible .
      I blow with security valve and find it sometimes difficult. This Bestway got really huge. But even it was much stretchier than yours (at least the material looks like that), a lot of pressure was needed - I guess my expanded cheeks tell the story. In the end I had to put my whole weight in to force more air into that thing until it exploded very nicely. Would love to try that with the Intex in your picture too.

      You can see that often the inner seems rip first. B2P hack: if you seal them carefully with some tape, as well as the outer seems on the side of your mouth (where the swim ring stretches most) you can get that swim ring stretch and bulge even more about the outer seems in the opposite direction. I like those big bulges, and blowing the large stretchy swim rings (90-119cm, especially the black mud masters) to burst is always great fun. Bye, Marvin
      Inflatables-Super-Tight-ToughSwimRing.jpg
      Wow thats amazing

      Comment

      • Ladyloonerlover
        Lover Of Mouth Inflation
        • Mar 2014
        • 372

        Originally posted by marvin19

        Hi RLMI,
        I definitely wanted to blow that one to burst. This bestway stretched much further than the usual 119cm rings and resisted a lot. It took me about 20min to blow it to pop right from the package (I'm not the fastest).
        Saw your great inflatables in this thread and how you carefully stretch them as tight as possible. Unfortunately, I'm not so into prestretching or extreme-stretching. I'm the classical B2Popper and absolutely love to blow to burst huge balloons with determination in front of my eyes. I also b2p inflatables from time to time (unused and unstretched), but not often, mostly swimrings and pool pillows, which I like a lot for bursting because they really bulge and take a lot of blows, if you support the seams with tape.
        BTW: did you ever try to stretch a pool pillow? Would be interesting to see what you can make out of it. Never mind: have a lot of fun with your fantastic selection of pool toy inflatables!

        Bye, Marvin
        b2p-poolpillow-infactory.jpg
        This is truly amazing stuff Marvin

        Comment

        • marvin19
          Member
          • May 2026
          • 51

          Hi RLMI,

          yeah exactly. I love to blow the wrinkles away first. Often normal people don't do this, because you already feel some resistance then, and for bigger swim rings, it needs some steady blowing beyond that point already (I'm amazed when they do it). When this is done, the inflatable is already overstretched to some degree actually. And then the real blowing fun begins But to let those swim rings bulge out, you need some help from tape. As you saw in the photos I blew that light blue one to burst without tape support: wonder how much it would have bulged out with some seal for the inner seams . In the photo below you can see some tape applied to a donut swimring.
          donut-seams-taped.jpg
          Bye, Marvin

          Comment

          • marvin19
            Member
            • May 2026
            • 51

            Originally posted by Ladyloonerlover

            This is truly amazing stuff Marvin
            Hi LadyLoonerLove,

            glad you like it. For me its much fun. I like those pool pillows, because they get really huge: if you can avoid that the seems rip at an early stage, the whole material will stretch out flat and give a little bit the impression of a huge balloon (which I like about it). In the photo you can see some tape stripes around the seams of a pool pillow. With some luck, it goes way bigger than this, depending on the brand.
            pool-pillow-seams-taped.jpg
            Bye, Marvin.

            Comment

            • Ladyloonerlover
              Lover Of Mouth Inflation
              • Mar 2014
              • 372

              Originally posted by marvin19

              Hi LadyLoonerLove,

              glad you like it. For me its much fun. I like those pool pillows, because they get really huge: if you can avoid that the seems rip at an early stage, the whole material will stretch out flat and give a little bit the impression of a huge balloon (which I like about it). In the photo you can see some tape stripes around the seams of a pool pillow. With some luck, it goes way bigger than this, depending on the brand.
              pool-pillow-seams-taped.jpg
              Bye, Marvin.
              I might have to get one just to try this. Thank you

              Comment

              • Eno
                Senior Member
                • Feb 2018
                • 206

                Originally posted by marvin19

                Hi LadyLoonerLove,

                glad you like it. For me its much fun. I like those pool pillows, because they get really huge: if you can avoid that the seems rip at an early stage, the whole material will stretch out flat and give a little bit the impression of a huge balloon (which I like about it). In the photo you can see some tape stripes around the seams of a pool pillow. With some luck, it goes way bigger than this, depending on the brand.
                pool-pillow-seams-taped.jpg
                Bye, Marvin.
                Now you really get me and I need to try this, too Awesome!
                What kind of pool pillow is this? Is that a SWIMLINE 4ft? How did you put the stripes on the seam?

                Comment

                • Hellus
                  Tough Blower
                  • Mar 2025
                  • 182

                  Originally posted by marvin19

                  Hi Hellus,

                  from time to time, I also blow swim rings until the seems rip. Once I blew a Bestway 119cm that is not so different from yours - some comparison possible .
                  I blow with security valve and find it sometimes difficult. This Bestway got really huge. But even it was much stretchier than yours (at least the material looks like that), a lot of pressure was needed - I guess my expanded cheeks tell the story. In the end I had to put my whole weight in to force more air into that thing until it exploded very nicely. Would love to try that with the Intex in your picture too.

                  You can see that often the inner seems rip first. B2P hack: if you seal them carefully with some tape, as well as the outer seems on the side of your mouth (where the swim ring stretches most) you can get that swim ring stretch and bulge even more about the outer seems in the opposite direction. I like those big bulges, and blowing the large stretchy swim rings (90-119cm, especially the black mud masters) to burst is always great fun. Bye, Marvin
                  Inflatables-Super-Tight-ToughSwimRing.jpg
                  Thank you for the answer, and for all the posts. You posted some of the most amazing inflatable pictures I've ever seen! I sent you a message, too.

                  Comment

                  • marvin19
                    Member
                    • May 2026
                    • 51

                    Originally posted by RLMI

                    I blew these up as big as I dared, with my mouth. There's sticky tape around the inner seams of the rings. I think they look pretty maxed out. Hope they last! Thanks for the tip.
                    They really look great. Oh man, I'd love to take each one of them, pull the plug and blow it to pieces

                    Comment

                    • heaviest
                      Senior Member
                      • Jun 2018
                      • 914

                      Originally posted by RLMI
                      There's sticky tape around the inner seams
                      Wondering if either of you has tried a bead of vinyl cement. I generally do two layers, making sure I get both sides of the seam with each layer, or three layers over a repair. It's a pain. I do it not to overinflate, but to overload with a lot of weight, though I'll overinflate some for pool use.

                      I'm surprised it works at all, but it works so well I often blow an OUTER seam. And I've done the outer seam, too. Not so much that I even remember the outcome, though.

                      Comment

                      • Eno
                        Senior Member
                        • Feb 2018
                        • 206

                        Originally posted by marvin19

                        Hi LadyLoonerLove,

                        glad you like it. For me its much fun. I like those pool pillows, because they get really huge: if you can avoid that the seems rip at an early stage, the whole material will stretch out flat and give a little bit the impression of a huge balloon (which I like about it). In the photo you can see some tape stripes around the seams of a pool pillow. With some luck, it goes way bigger than this, depending on the brand.
                        pool-pillow-seams-taped.jpg
                        Bye, Marvin.
                        One question: How do you hold the valve? The pool pillows I have do have a flat red valve, nothing for your lips or teeth to grip on to press air into. Do you take your hands to press it on your mouth?

                        Comment

                        • marvin19
                          Member
                          • May 2026
                          • 51

                          Originally posted by Eno

                          One question: How do you hold the valve? The pool pillows I have do have a flat red valve, nothing for your lips or teeth to grip on to press air into. Do you take your hands to press it on your mouth?
                          This one has a black valve. Don't know exactly what brand it is (some german seller). The black ones are easy to blow. I was suspiscious with the red ones. Now that you say that they are impossible to hold, I' d like to avoid them Thanks for sharing your experience! The lightblue (I guess Infactory) pool pillows have that normal valve just like the toy inflatables. It much more difficult to blow because of that inner flap. But i'm not an expert with that.
                          Bye, Marvin
                          pool-pillow-black-valve.jpg

                          Comment

                          • Hellus
                            Tough Blower
                            • Mar 2025
                            • 182

                            Originally posted by Hellus
                            How do you find my newly acquired Intex swimming? This is my first experience with an inflatable, initially could not figure out how to even start inflating. This is a good size, but now it is very hard, and I can't put more air in it. B2P this is a significant challenge. Whoever managed to B2P swim rings must have iron lungs. I am not on the weak side either, but this requires overcoming a separate set of barriers.
                            Unfortunately, had to put it down because it was getting promiscuous !
                            Hats off to marvin19 for his idea of taping. This ring developed a small leak near the seam, and a simple patch was not working. So I taped the ring covering the entire arm (not across the seam, but vertically). This blocked the air leak. The material did not prove to be strong for my lungs! 20260519_230656.jpg 20260519_230555.jpg
                            ​​​

                            Comment

                            • Steve_inflator
                              Senior Member
                              • Aug 2013
                              • 207

                              Originally posted by RLMI

                              I bought another 20inch ring yesterday from the same shop, as the lady on staff who blows the inflatables really big was working.

                              I chose a blue patterned ring which was flat in the packaging, and I was hoping the lady would offer to fill it with air when I paid for it, which she did.

                              She said she'd blow it up nice and full so I wouldn't have to add more air later, and proceeded to blow up my new ring using her mouth. She had very strong lungpower as her breath quickly expanded the vinyl ring to a huge size. Towards the end, to fight the air pressure, she had to press the ring hard toward her lips, whilst keeping a firm grip with her teeth on the valve base. She was exerting hard toward the end. The ring was getting so taut and beginning to distort. I was genuinely afraid it would burst. The wrinkles were long blown away, and she kept blowing bravely in the ring, making it keep swelling bigger, as it made room for all the air forced inside it.

                              There was a huge gush of air when she took the colossal ring out of her mouth, and she plugged the valve rapidly, and handed it to me, the whole ring, warm with her breath, and its mouthpiece unwiped, still glistening wet, with her saliva and lipstick imprint.


                              The ring continues to maintain its gigantic size, and funnily enough, the smell from her lipstick is still quite present around the mouthpiece area. It'd be the most overinflated thing I have bought from the shop ever.

                              It's clear to see below, from the swim rings for sale at this shop, that they're all blown up dangerously huge, to the verge of popping. In fact, you can see a few of the rings have begun to leak, as they are overinflated so much. I'd believe that the shop girl blew every ring up by mouth, fully filled with breath, to a giant size. She has excellent lungs and mouth grip, and leaves the rings hanging in her lips & mouth, even though they're already extremely overinflated, as she bites the valve to feed more breaths into the ring, till the vinyl bulges up dangerously, like the purple ones below. The rings just get literally twice as thick and fat as they should be. I'd love to buy them all. Most of the rings have lipgloss glitter and saliva prints still around the mouthpieces too.
                              You've gotta take me to this shop some day 😍😉

                              Comment

                              • Steve_inflator
                                Senior Member
                                • Aug 2013
                                • 207

                                Originally posted by RLMI

                                Totally. I was so enthralled by my new blue ring today, that I actually went back to buy another ring, hopefully also excessively overinflated and bloated, and of course, mouth blown.

                                I'm not sure if the shop lady recognised me, but I just said that I bought a 20in (50cm) ring from them, earlier that day, but it is a bit small, and would there be a slightly larger size?

                                She instantly said the next size up was a 24in, or 60cm. She didn't have any already filled with air, but offered to blow one up, to show the inflated size. She asked what colour I'd like, to save blowing up 2 rings unnecessarily, so I said pink!

                                She pulled out a folded, brand new glossy pink ring and literally said she'd be a minute, and brought the nozzle to her mouth, with the entire valve cap also inserted inside her lips, and blew it up, continuously, not stopping till it reached the same ridiculously bloated, overinflated state that she seemed to naturally go for, every time.

                                The ring was blown up really fat and thick, with no wrinkles at all. It was so stretched that the vinyl printing on the top half began to thin out and show streaky stretch marks. All from her breath too. She closed the valve, but didn't press the valve stem inward. She just let me hold the huge ring to see its size. It was hard and taut with lots of air, and I said it was great, and that I'd take it! It's still super big and hard, holding air pressure nicely. It won't need topping up. The valve stem was wet with a lot of saliva and condensation, so I managed to press the valve stem in without touching it too much.

                                I think maybe your swim ring supply store owner is implementing their zero carbon footprint and physical fitness policy by training staff to blow up pool toys with lungpower, so it's a winner all round. 😍

                                Comment

                                Working...