Inflatables blown super tight or till they pop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    Originally posted by puffy cheeks

    nice score man! these are beautiful!! I would have bought one or to of those myself seeing them like that in person. I love how the place you visit has a good understanding of what "fully blown" inflatables are, being by mouth!
    This shop always has very tightly blown inflatables on sale, displayed proudly outside. The staff will often top up the air by blowing a few full breaths into the item, at the checkout, when someone makes a purchase.

    The items are already filled up very big and tight for a start, bulging nicely with no wrinkles visible any longer.
    Mouth blown pink big 2.jpg

    Nevertheless, more air is blown into it, so it is firm and hard for the user.

    Mouth blown pink 3.jpg

    It was scary to see how big this ring was being blown, as I thought it would burst, but fortunately it did not. It just absorbed breath after breath being blown into its already misshapen and overstretched bladder.

    Mouth blown pink big 1.jpg
    The whole ring was bloated and fat when the inflating finally stopped, to my great relief.

    Mouth blown pink big 4.jpg

    Comment

    • Hellus
      Tough Blower
      • Mar 2025
      • 182

      How do you find my newly acquired Intex swimming? This is my first experience with an inflatable, initially could not figure out how to even start inflating. This is a good size, but now it is very hard, and I can't put more air in it. B2P this is a significant challenge. Whoever managed to B2P swim rings must have iron lungs. I am not on the weak side either, but this requires overcoming a separate set of barriers.
      Attached Files

      Comment

      • Ladyloonerlover
        Lover Of Mouth Inflation
        • Mar 2014
        • 372

        Originally posted by Hellus
        How do you find my newly acquired Intex swimming? This is my first experience with an inflatable, initially could not figure out how to even start inflating. This is a good size, but now it is very hard, and I can't put more air in it. B2P this is a significant challenge. Whoever managed to B2P swim rings must have iron lungs. I am not on the weak side either, but this requires overcoming a separate set of barriers.
        That is a monster

        Comment

        • Hellus
          Tough Blower
          • Mar 2025
          • 182

          20260329_181857.jpg Found this (& the previous one) in a thrift store. Both look new, but this has a couple of holes, taped them. Two inflation valves. The larger one is still soft, but cannot put more air. The safety valve is a bitch. Can anyone please help me removing it? Saw some Youtube videos, still can't do it. If this is how the safety valves are placed, my B2P dream is a far cry.
          N.B. Actually there is no separate valve, the inflation nozzle is closed with a slight cut at the bottom, which allows air to flow when forced. Is it true for everyone's inflatables?

          Comment

          • Guest

            Originally posted by puffy cheeks

            nice score man! these are beautiful!! I would have bought one or to of those myself seeing them like that in person. I love how the place you visit has a good understanding of what "fully blown" inflatables are, being by mouth!
            Fully blown is an understatement! Look at how absolutely dangerously overfilled and distended these rings were blown up by the shop.

            Shop blown tightest .jpg
            They're stretched to the point where they've swelled up really big and thick, like balloons. The whole tube just looks double the intended thickness, and every item was blown up to the same insane extent. That's a lot of breath, and lots of saliva on the valves, to make the rings reach such tightnesses only from mouth blowing.

            Shop blown tightest 2.jpg Shop blown tightest 3.jpg

            Comment

            • Eno
              Senior Member
              • Feb 2018
              • 206

              I love b2p of inflatables...

              Comment

              • Hellus
                Tough Blower
                • Mar 2025
                • 182

                20260331_215348.jpg 20260331_215234.jpg Bought from a thrift store. Very tight and the shape deformed under my lung pressure, but still couldn't B2P.

                Comment

                • Eno
                  Senior Member
                  • Feb 2018
                  • 206

                  Originally posted by Hellus
                  20260331_215348.jpg 20260331_215234.jpg Bought from a thrift store. Very tight and the shape deformed under my lung pressure, but still couldn't B2P.
                  Shall I come over to help? ;-)

                  Comment

                  • Hellus
                    Tough Blower
                    • Mar 2025
                    • 182

                    Originally posted by Eno

                    Shall I come over to help? ;-)
                    Please tell me how I can b2p without removing the safety valve. I blew it over 28 minutes, now my abs hurt. Is it simply a matter of patience? I am strong enough to B2P industrial rubber gloves (see my earlier posts), so I guess it is a matter of technique and practice?
                    I am a novice to inflatables, started a couple of days ago.

                    Comment

                    • Eno
                      Senior Member
                      • Feb 2018
                      • 206

                      Originally posted by Hellus

                      Please tell me how I can b2p without removing the safety valve. I blew it over 28 minutes, now my abs hurt. Is it simply a matter of patience? I am strong enough to B2P industrial rubber gloves (see my earlier posts), so I guess it is a matter of technique and practice?
                      I am a novice to inflatables, started a couple of days ago.
                      Remove the safety flap and put an adapter with a check valve in. This is how I am doing it. But when inflating with my inflatable lover friends we prefer to share the real valve first to inflate it in turns before then ramming the adapter in and doing a b2p via the check valve.

                      Comment

                      • Guest

                        Originally posted by Hellus
                        20260331_215348.jpg 20260331_215234.jpg Bought from a thrift store. Very tight and the shape deformed under my lung pressure, but still couldn't B2P.
                        These beachballs at a local shop also seemed to be blown up very big and tight for sale, and the vinyl panels seem to be pushing outwards from the air pressure, with the colours seemingly thinning out from stretching. The balls seem to also be already distorting and becoming wider halfway between the poles. Always intriguing to wonder why the shop blows them up so big and full. The shop ladies at this shop always readily blow the items by mouth all the time, with their lips sealed round the whole nozzle until the air pressure is very strong. Interestingly, I noticed the valve caps going right inside their mouths when they blow these inflatables, instead of pushing the valve cap to the side of their lips or cheeks.

                        Similarly, the tubes are also filled up very full and hard, till they're very tautly expanded and swollen. rings 5.jpg

                        In the 2nd photo, they've blown up the new set of beach balls on the right, and you can tell how overinflated the red soccer print ball, and the Spiderman ball are, from the lightened and translucent stretched vinyl. However, you can see the beach ball at the bottom of the middle row, and the bottom of the left row, have both leaked, presumably from being blown up too much.

                        Shop beachball .jpg Shop beachballs .jpg Shop tubes.jpg
                        Last edited by Guest; 05-04-2026, 16:52.

                        Comment

                        • Ladyloonerlover
                          Lover Of Mouth Inflation
                          • Mar 2014
                          • 372

                          Originally posted by RLMI

                          These beachballs at a local shop also seemed to be blown up very big and tight for sale, and the vinyl panels seem to be pushing outwards from the air pressure, with the colours seemingly thinning out from stretching. The balls seem to also be already distorting and becoming wider halfway between the poles. Always intriguing to wonder why the shop blows them up so big and full.

                          Similarly, the tubes are also filled up very full and hard.

                          Shop beachball .jpg Shop tubes.jpg
                          They look ready to burst

                          Comment

                          • Kitten
                            Senior Member
                            • Jul 2023
                            • 548

                            Originally posted by Hellus
                            20260329_181857.jpg Found this (& the previous one) in a thrift store. Both look new, but this has a couple of holes, taped them. Two inflation valves. The larger one is still soft, but cannot put more air. The safety valve is a bitch. Can anyone please help me removing it? Saw some Youtube videos, still can't do it. If this is how the safety valves are placed, my B2P dream is a far cry.
                            N.B. Actually there is no separate valve, the inflation nozzle is closed with a slight cut at the bottom, which allows air to flow when forced. Is it true for everyone's inflatables?
                            Small pliers work for me. On the bigger valves, I can grab the bottom bit through the material on the other side and pull. Although I'm not sure you'll b2p a lilo. I can't do those. Beachballs are easier.

                            Comment

                            • Hellus
                              Tough Blower
                              • Mar 2025
                              • 182

                              Originally posted by Kitten

                              Small pliers work for me. On the bigger valves, I can grab the bottom bit through the material on the other side and pull. Although I'm not sure you'll b2p a lilo. I can't do those. Beachballs are easier.
                              Thanks. Since I love a difficult challenge, I will first try to b2p my small bechball without removing the valve. I have seen people doing it, so I think it is definitely possible, I need to earn the experience. Regarding the lilo, did you see any videos/posts where someone managed to b2p? Ballonertick b2ped both single and double mattresses, although they are different breeds.

                              Comment

                              • Kitten
                                Senior Member
                                • Jul 2023
                                • 548

                                Originally posted by Hellus

                                Thanks. Since I love a difficult challenge, I will first try to b2p my small bechball without removing the valve. I have seen people doing it, so I think it is definitely possible, I need to earn the experience. Regarding the lilo, did you see any videos/posts where someone managed to b2p? Ballonertick b2ped both single and double mattresses, although they are different breeds.
                                I can do beachballs without removing the valve. In fact I quite enjoy it because its harder and makes it last much longer. I like the normal beachballs best because they build up a lot of pressure. The huge ones are actually pretty easy. It made me junp when my first one popped because I thought it would get bigger.

                                I guess you could heat stretch the lilo. That makes it very easy. I did it with a hair drier before.

                                Comment

                                Working...