Inflatables blown super tight or till they pop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    Originally posted by Ladyloonerlover

    They look ready to burst
    These rings at the shop were also ready to explode, filled up to the maximum size, and bulging up on one half, with the air pressure. The lighting also shows the extent the vinyl has stretched, as it is thinned and translucent. Upon a quick scrutiny, noticed the mouthpieces of many rings are stained with lipstick prints too, as well as prints from the lips and face rubbing on the valve surrounds during inflation.

    There were lots of rings on sale, inside and outside.


    ​
    The rings outside were all blown up ultra big and tight, and were warping additionally due to the sunlight. The dark pink ring is quite visibly bent and all the rings are really thick and solid hard. That's a lot of breath! It would be very tiring to blow so many to the same tightness.

    ​​​​​​​I wonder if many popped. ​
    ​ ​​​
    ​​​

    Comment

    • Guest

      2.png
      Saw this transparent metallic 20inch beachball at the shop for the 1st time. It had the most beautiful colours and was so shiny. I picked it up and felt that it was inflated very tightly, and was rigid and hard. Its shape was already well rounded and each panel curved elegantly, with no hexagonal shape remaining. It bounced like a basketball as it was so full of air. I wasn't able to get a pic but the round panel where the valve is was wet with breath condensation, and it is just visible that the clear panel also shows fogging. All the beachballs were filled equally tightly too.

      Similarly, there was various pooltoys also available, all blown up very full and fat.
      3.png
      The rings were all bulging and distorting on one side due to the pressure.
      1.png 5.png 4.png
      The wrinkles were all gone, and these tubes were blown past the wrinkle free stage, as they had continued to expand and become thick and bloated, and lopsided in the distorting. Some even had the outer seams stretched taut with no wavy lines and all looked like big round balloons. There was no more fogging inside the rings but I could see some lip prints at the mouthpieces, with pink glittery lipgloss marks rubbed off on the joints and ridges of the valve surrounds and valve cap.

      All the valves were closed off but none of the valve stems were pushed in.

      I did something mischievous when nobody was near for the first time - I opened the valve of a very tight ring, but the safety valve worked perfectly and no air escaped at all, despite the ring being fully pressured up and overinflated heavily.

      I then quickly put the valve up to my mouth and tried to see if I could get any more air into it. I tried blowing quite strongly, but I was unable to get any air in it, as it was already swelled to the max. I pulled the valve out of my mouth and closed it before anyone saw, then put the ring back.
      Last edited by Guest; 12-04-2026, 00:08.

      Comment

      • condensatelover
        Senior Member
        • Jan 2022
        • 141

        Originally posted by RLMI
        2.png
        Saw this transparent metallic 20inch beachball at the shop for the 1st time. It had the most beautiful colours and was so shiny. I picked it up and felt that it was inflated very tightly, and was rigid and hard. Its shape was already well rounded and each panel curved elegantly, with no hexagonal shape remaining. It bounced like a basketball as it was so full of air. I wasn't able to get a pic but the round panel where the valve is was wet with breath condensation, and it is just visible that the clear panel also shows fogging. All the beachballs were filled equally tightly too.

        Similarly, there was various pooltoys also available, all blown up very full and fat.
        3.png
        The rings were all bulging and distorting on one side due to the pressure.
        1.png 5.png 4.png
        The wrinkles were all gone, and these tubes were blown past the wrinkle free stage, as they had continued to expand and become thick and bloated, and lopsided in the distorting. Some even had the outer seams stretched taut with no wavy lines and all looked like big round balloons. There was no more fogging inside the rings but I could see some lip prints at the mouthpieces, with pink glittery lipgloss marks rubbed off on the joints and ridges of the valve surrounds and valve cap.

        All the valves were closed off but none of the valve stems were pushed in.

        I did something mischievous when nobody was near for the first time - I opened the valve of a very tight ring, but the safety valve worked perfectly and no air escaped at all, despite the ring being fully pressured up and overinflated heavily.

        I then quickly put the valve up to my mouth and tried to see if I could get any more air into it. I tried blowing quite strongly, but I was unable to get any air in it, as it was already swelled to the max. I pulled the valve out of my mouth and closed it before anyone saw, then put the ring back.
        Quite surprising that many women have strong lungs.

        Comment

        • Guest

          Interesting to see reduced prices on leaky beachballs- 2 out of 4 have clearly lost air but are still for sale.
          Leaky balls 2.jpg
          The beachballs still maintaining full size look very tight and rounded.

          Similar situation in another pile of beachballs a metre away, with some shrivelling from air leaks.
          Leaky balls .jpg
          Rings with leaks were also seen.

          ​The rings look to be blown up fully wrinkle-free and swollen but the blue ring and yellow ring on the left are beginning to shrink and get wrinkles.
          Leaky tubes.jpg

          Notice some popped rings amongst these ones for sale too. Given that they're all very overinflated, I'm surprised not more end up popping or leaking from excessive air being forced inside them.

          When I have seen the items being blown up to this size, it is exciting but frightening to see air still being enthusiastically added despite the items already being past the rated size. Inevitably waiting for a bang as the vinyl expands and keeps getting fatter like a balloon.
          Leaky tube 4.jpg Leaky tube 3.jpg

          Comment

          • Hellus
            Tough Blower
            • Mar 2025
            • 182

            If you think Dinosaurs are extinct, explain these. 20260414_084624.jpg 20260414_084532.jpg 20260414_084600.jpg

            Comment

            • puffy cheeks
              inflatable lover
              • Nov 2013
              • 243

              Originally posted by Eno

              Shall I come over to help? ;-)
              what size is it?? I've blown to pop some 24inch ones from Walmart before. the bigger they are the easier they are. I have a 12inch one that I was able to blow up to almost 24inches before I stopped and just enjoyed looking at it . I do like challenging myself as well
              Attached Files

              Comment

              • Guest

                Tight pumped 2.jpg

                Saw this ring being blown up by mouth till about 75%, when the air pressure became too strong, so switched to a hand pump, and pumped up extremely full and hard.

                The person kept pumping air into it, even after it was already wrinkle free, and the outer seam was stretched out totally straight without any waviness.
                Tight pumped 1.jpg
                It was pumped so full that it was swelled up and just getting thicker like a bubble. They must have stopped just before it burst! Look how amazingly overinflated it is. It looked rock-solid when the nozzle was pressed shut and the ring didn't flex or compress one bit.
                Attached Files

                Comment

                • Hellus
                  Tough Blower
                  • Mar 2025
                  • 182

                  Originally posted by Hellus
                  20260331_215348.jpg 20260331_215234.jpg Bought from a thrift store. Very tight and the shape deformed under my lung pressure, but still couldn't B2P.
                  20260503_112844.jpg
                  Finally, my lungs killed this little piece of ! Challenging, but not too difficult once I figured out the correct inflation technique. Took just over 4 minutes from completely uninflated to popped. I kept blowing, and blowing, and I heard a bang! The beach ball ripped itself across a seam.

                  Comment

                  • Ladyloonerlover
                    Lover Of Mouth Inflation
                    • Mar 2014
                    • 372

                    Originally posted by Hellus

                    20260503_112844.jpg
                    Finally, my lungs killed this little piece of ! Challenging, but not too difficult once I figured out the correct inflation technique. Took just over 4 minutes from completely uninflated to popped. I kept blowing, and blowing, and I heard a bang! The beach ball ripped itself across a seam.
                    Way to go!

                    Comment

                    • Guest

                      Sometimes, inflatables can be pumped to the maximum too, if mouth inflation is not an option.
                      Clear pumped up tight .jpg
                      The clear ring is already full of air, and is looking hard and firm.

                      Pink 1.jpg
                      Similarly, these animal rings stretched out a lot when more air was pumped into them, all the creases and wrinkles disappearing, and growing in size overall, becoming very rounded and bulging.

                      Pink 2.jpg

                      Comment

                      • Guest

                        These communal inflatables at the pool invariably get mouth blown repeatedly by respective users.


                        Sometimes, not always, they get blown up really huge, like this navy ring, which was filled up till it was solid hard like a rock. The lady blowing into it just kept going.
                        ​
                        Last edited by Guest; 16-05-2026, 07:02.

                        Comment

                        • Hellus
                          Tough Blower
                          • Mar 2025
                          • 182

                          Originally posted by Hellus
                          If you think Dinosaurs are extinct, explain these. 20260414_084624.jpg 20260414_084532.jpg 20260414_084600.jpg
                          20260503_112937.jpg

                          Not a true B2P, but there was a leak across the seam on my Dino's leg when I was blowing. Tape is not solving the problem. Any suggestions how I can patch up?

                          Comment

                          • Haruko Hai
                            Junior Member
                            • Mar 2022
                            • 9

                            Originally posted by Hellus

                            20260503_112844.jpg
                            Finally, my lungs killed this little piece of ! Challenging, but not too difficult once I figured out the correct inflation technique. Took just over 4 minutes from completely uninflated to popped. I kept blowing, and blowing, and I heard a bang! The beach ball ripped itself across a seam.
                            good job!

                            Comment

                            • Ladyloonerlover
                              Lover Of Mouth Inflation
                              • Mar 2014
                              • 372

                              Originally posted by RLMI
                              Just a collection of heavily overpressured swim rings we've had, when all were blown up really tightly till they were bloated and distended. They were really nice to float on, as they were so hard and firm.

                              Knowing they were mouth blown, and filled with our exhaled breath, made the rings even more alluring, as they glistened and bobbed tautly like solid objects. The rings were all blown straight away till the wrinkles were gone, and had more air added, till we couldn't huff any more air into them, and they looked like big round balloons.

                              The rings never had a pump connected, and were exclusively only blown up tightly every time with our mouths, with air from our lungs.




                              I need to come test them out lol

                              Comment

                              • marvin19
                                Member
                                • May 2026
                                • 51

                                Originally posted by Hellus
                                How do you find my newly acquired Intex swimming? This is my first experience with an inflatable, initially could not figure out how to even start inflating. This is a good size, but now it is very hard, and I can't put more air in it. B2P this is a significant challenge. Whoever managed to B2P swim rings must have iron lungs. I am not on the weak side either, but this requires overcoming a separate set of barriers.
                                Hi Hellus,

                                from time to time, I also blow swim rings until the seems rip. Once I blew a Bestway 119cm that is not so different from yours - some comparison possible .
                                I blow with security valve and find it sometimes difficult. This Bestway got really huge. But even it was much stretchier than yours (at least the material looks like that), a lot of pressure was needed - I guess my expanded cheeks tell the story. In the end I had to put my whole weight in to force more air into that thing until it exploded very nicely. Would love to try that with the Intex in your picture too.

                                You can see that often the inner seems rip first. B2P hack: if you seal them carefully with some tape, as well as the outer seems on the side of your mouth (where the swim ring stretches most) you can get that swim ring stretch and bulge even more about the outer seems in the opposite direction. I like those big bulges, and blowing the large stretchy swim rings (90-119cm, especially the black mud masters) to burst is always great fun. Bye, Marvin
                                Inflatables-Super-Tight-ToughSwimRing.jpg

                                Comment

                                Working...