Repairing Inflatables! Must read for non-poppers and non-leakers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jkloon
    Senior Member
    • Aug 2013
    • 357

    Repairing Inflatables! Must read for non-poppers and non-leakers

    Okay. I finally figured out how to successfully repair punctured inflatables.

    Backstory: (skip to solution if interested): I have a 2009 intex inflatable dog that I got about 3 years ago. About 6 months into having it, it developed a small hole in a seam. I used the repair patch given with it, and it worked well. Then one day, I decided to hook it up to a compressor cuz I was home alone, and didn't have much time. I was inflating it bigger and bigger, enjoying watching it stretch, until *BAM* it ripped a hole about 2 feet long down the seam. Since then I've been trying different ways to repair it, and I finally found one that works.

    Solution: Get some Automotive Goop (that's what it's actually called. Comes in a red metal tube) and a piece of vinyl/PVC from an inflatable you no longer want/need (beach-ball, water-wing, etc.), inflate the inflatable you want to repair, cover the back of this with Goop and put it over the hole. (For a seam split or larger hole you may want to put a piece of duct tape on the inside to hold the two sides together). After it dries, put Goop around all the edges to ensure a good solid seam, make sure you get it under, around and on top of the "repair strip" (piece of inflatable mentioned earlier). Once that dries, inflate your inflatable and check for leaks. Cover any leaks with Goop (you can leave it inflated while you do this) and just use your finger to work it around and make sure it's sealed. Repeat until there are no more leaks.
  • Ash_738
    Member
    • Jun 2013
    • 84

    #2
    Re: Repairing Inflatables! Must read for non-poppers and non-leakers

    Excellent!

    Looks like a good product for a lot of other uses besides. May have to order some.

    How are the fumes? The last/only time I repaired an inflatable with vinyl adhesive, it was horrendous. I should have waited and done it outside when I was alone but at the time I was young and stupid. Now I'm just stupid.
    Shut up and blow!

    Comment

    • Jkloon
      Senior Member
      • Aug 2013
      • 357

      #3
      Re: Repairing Inflatables! Must read for non-poppers and non-leakers

      It's fine. It has a noticeable odor, but it fades quickly. I do all my repairs in my bedroom, which the door to is constantly closed, and it's fine.

      Comment

      • Jkloon
        Senior Member
        • Aug 2013
        • 357

        #4
        Re: Repairing Inflatables! Must read for non-poppers and non-leakers

        Important Edit: I have recently tried Marine Goop. It is clear as opposed to black, and seems to work just as well. It's also stretchier. There is a downside though. It is fairly runny and liquidy. It makes it harder to repair inflatables while they are inflated, but it's not impossible. There is also not much of an odor to it.

        Comment

        • Ash_738
          Member
          • Jun 2013
          • 84

          #5
          Re: Repairing Inflatables! Must read for non-poppers and non-leakers

          Good to know, thanks!
          Shut up and blow!

          Comment

          Working...