Okay. I finally figured out how to successfully repair punctured inflatables.
Backstory: (skip to solution if interested): I have a 2009 intex inflatable dog that I got about 3 years ago. About 6 months into having it, it developed a small hole in a seam. I used the repair patch given with it, and it worked well. Then one day, I decided to hook it up to a compressor cuz I was home alone, and didn't have much time. I was inflating it bigger and bigger, enjoying watching it stretch, until *BAM* it ripped a hole about 2 feet long down the seam. Since then I've been trying different ways to repair it, and I finally found one that works.
Solution: Get some Automotive Goop (that's what it's actually called. Comes in a red metal tube) and a piece of vinyl/PVC from an inflatable you no longer want/need (beach-ball, water-wing, etc.), inflate the inflatable you want to repair, cover the back of this with Goop and put it over the hole. (For a seam split or larger hole you may want to put a piece of duct tape on the inside to hold the two sides together). After it dries, put Goop around all the edges to ensure a good solid seam, make sure you get it under, around and on top of the "repair strip" (piece of inflatable mentioned earlier). Once that dries, inflate your inflatable and check for leaks. Cover any leaks with Goop (you can leave it inflated while you do this) and just use your finger to work it around and make sure it's sealed. Repeat until there are no more leaks.
Backstory: (skip to solution if interested): I have a 2009 intex inflatable dog that I got about 3 years ago. About 6 months into having it, it developed a small hole in a seam. I used the repair patch given with it, and it worked well. Then one day, I decided to hook it up to a compressor cuz I was home alone, and didn't have much time. I was inflating it bigger and bigger, enjoying watching it stretch, until *BAM* it ripped a hole about 2 feet long down the seam. Since then I've been trying different ways to repair it, and I finally found one that works.
Solution: Get some Automotive Goop (that's what it's actually called. Comes in a red metal tube) and a piece of vinyl/PVC from an inflatable you no longer want/need (beach-ball, water-wing, etc.), inflate the inflatable you want to repair, cover the back of this with Goop and put it over the hole. (For a seam split or larger hole you may want to put a piece of duct tape on the inside to hold the two sides together). After it dries, put Goop around all the edges to ensure a good solid seam, make sure you get it under, around and on top of the "repair strip" (piece of inflatable mentioned earlier). Once that dries, inflate your inflatable and check for leaks. Cover any leaks with Goop (you can leave it inflated while you do this) and just use your finger to work it around and make sure it's sealed. Repeat until there are no more leaks.

Comment