Love dolls vs. other inflatables

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zycram
    Senior Member
    • Nov 2024
    • 408

    Love dolls vs. other inflatables

    I see that many of you are into love dolls too which seems to be evident at first sight. However, there are two important things to mention: some dolls are not that easy to keep clean, nor are SPHs in general. Secondly, cheap PVC dolls have many more weak points than some traditional inflatable toys and they are much more prone to leaks when regularly used. (This is why I didn't want to buy a doll for a long time and I was sticking to the toys I already had.)

    Latex dolls are much sturdier, but I have to admit that only a few types of them, if at all, are still in production.
    Letha Weapons was probably the best doll ever made, but I would have preferred the French Domax dolls because of their beauty.
    The ideal love doll would be much like the Domax doll (including its face) - made of latex but with a soft head. Is there any chance that a doll like this will be made?

    Under the present market conditions, I would buy a doll which is fairly cheap but beautiful. Does any of you have one? Or any latex or silicone dolls? Do you use your doll together with other inflatebles? Pls share your experiences.
    Last edited by zycram; 21-09-2025, 12:02.
  • inbox_pm
    Senior Member
    • Apr 2017
    • 189

    #2
    I have a 3 simple vinyl dolls for years without any problems. Yes, they have a lot of negative curves, but they are made for gentle play, not for full weight ride. It's very easy to keep her clean, just deflate and wash her immediately after a play. The same as any other SPH toy.

    Comment

    • erictom333
      Member
      • Jan 2025
      • 97

      #3
      I personally want to get custom inflatable dolls of my favourite characters, although I don't want to do anything sexual with them.

      Comment

      • glovepopper
        Senior Member
        • May 2019
        • 390

        #4
        I had a few cheap inflatable dolls, and I always tried to enhance their roundness by inflating them tightly, so they didn't last long with me. Their weak point, like other inflatables, is the seams on the negative curves. I repaired smaller tears, but if the tear was large, I threw it away. When the doll survived, I liked to open the valve when I came, which made my orgasm more intense.

        I intentionally destroyed one cheap doll (photos 3 and 4) by slowly inflating it with an aquarium pump. It took about 20 minutes, and I was lying naked on the doll the whole time. The doll burst in the perfect place - the crotch - so I felt a strong sudden blast of air on my crotch. It was an interesting experience and very exciting.
        Attached Files

        Comment

        • Felicity Fuxs
          Senior Member
          • Jul 2022
          • 208

          #5
          To clean out the doll, if you have a shower, remove the shower head, then insert the hose part into the opening that needs cleaning as such, or use a garden hose say. Ive had many dolls who eventualy have all gone down on me, but not in the way I would of liked them to have done so. Has anyone ever considered keeping one permantly inflated then build the doll up with layers of paper mache mixed with plaster of paris or resin say, so you end up with a solid doll, or even consider a manequin perhaps and drill a few holes in places to insert an sph maybe.

          Comment

          • Inflatablefun82
            Senior Member
            • Mar 2016
            • 116

            #6
            Originally posted by glovepopper
            I had a few cheap inflatable dolls, and I always tried to enhance their roundness by inflating them tightly, so they didn't last long with me. Their weak point, like other inflatables, is the seams on the negative curves. I repaired smaller tears, but if the tear was large, I threw it away. When the doll survived, I liked to open the valve when I came, which made my orgasm more intense.

            I intentionally destroyed one cheap doll (photos 3 and 4) by slowly inflating it with an aquarium pump. It took about 20 minutes, and I was lying naked on the doll the whole time. The doll burst in the perfect place - the crotch - so I felt a strong sudden blast of air on my crotch. It was an interesting experience and very exciting.
            Ohhhh I love this!!! Shame you didn’t get it on video!!! This is right up my street

            Comment

            • inbox_pm
              Senior Member
              • Apr 2017
              • 189

              #7
              Originally posted by glovepopper
              IWhen the doll survived, I liked to open the valve when I came, which made my orgasm more intense.
              Yes, it feels awesome when cumming in a deflating doll! I also often doing this.

              Originally posted by glovepopper
              I intentionally destroyed one cheap doll (photos 3 and 4) by slowly inflating it with an aquarium pump. It took about 20 minutes, and I was lying naked on the doll the whole time. The doll burst in the perfect place - the crotch - so I felt a strong sudden blast of air on my crotch. It was an interesting experience and very exciting.
              Oh, it's so excitive to play with a toy on edge of pop! What first, my orgasm or a toy pop? But dolls are too expensive and rare for this, so I doing this mostly with a small beachballs, overinflating them by mouth.

              Comment

              • glovepopper
                Senior Member
                • May 2019
                • 390

                #8
                Originally posted by inbox_pm
                Oh, it's so excitive to play with a toy on edge of pop! What first, my orgasm or a toy pop? But dolls are too expensive and rare for this, so I doing this mostly with a small beachballs, overinflating them by mouth.
                I came first, the doll burst a minute later...
                As I remember, it took three attempts before it finally worked, and the doll exploded just as I wanted it to. It didn't work the first time because the doll leaked at the seams - you can see the patch in the last photo.
                I bought the cheapest dolls, for less than €10. The one used for the bursting was €4, as I remember. It's a shame I didn't buy more of them, now they're unavailable.

                Comment

                • inbox_pm
                  Senior Member
                  • Apr 2017
                  • 189

                  #9
                  Originally posted by glovepopper
                  I came first, the doll burst a minute later...
                  As I remember, it took three attempts before it finally worked, and the doll exploded just as I wanted it to. It didn't work the first time because the doll leaked at the seams - you can see the patch in the last photo.
                  To continue moves and complete in a already popped toy is so funny! Of course, it's a most loaded place of her. A dolls in sitting pose have another easy poppable places, a big negative curves between body and legs. I saw someone's video how such doll explodes from a first ride
                  Originally posted by glovepopper
                  I bought the cheapest dolls, for less than €10. The one used for the bursting was €4, as I remember. It's a shame I didn't buy more of them, now they're unavailable.
                  I my country the cheapest dolls, similar to your, costs $20 and more and every types of them are rare and difficult to find.

                  Comment

                  • inbox_pm
                    Senior Member
                    • Apr 2017
                    • 189

                    #10
                    This girl with me for about 6 years. One time she got a small seam leak on the head, easy repaired, and holds air as new
                    IMG_20250726_223843154_PORTRAIT.jpg
                    IMG_20250726_223904233_PORTRAIT.jpg

                    Comment

                    • glovepopper
                      Senior Member
                      • May 2019
                      • 390

                      #11
                      I confirm that negative curves are the weakest points in dolls with more complex shapes than the flat missionary position. The doll from the photo below was probably an exception because it was cheap (~€5) but quite durable, perhaps because it was better welded. Sometimes, when the leak was small, I added air and fucked the doll harder so that it would finally burst with a bang when I reached orgasm.

                      I have an idea how to reinforce a cheap doll... It will be time-consuming, but the reinforcements will not be visible from the outside. You need to cut the doll in a place that allows you to get to the seams from the inside - the back, for example. The cut should not be large, but sufficient to turn the doll inside out. Use long strips of vinyl (from another broken doll) and vinyl glue to reinforce all the critical seams from the inside. Once the glue on the reinforcements has dried, close the cut you made earlier, and you're done. It's easier said than done, but in my opinion, it can be done, you just have to be patient.
                      Attached Files

                      Comment

                      • zycram
                        Senior Member
                        • Nov 2024
                        • 408

                        #12
                        Originally posted by glovepopper
                        I confirm that negative curves are the weakest points in dolls with more complex shapes than the flat missionary position. The doll from the photo below was probably an exception because it was cheap (~€5) but quite durable, perhaps because it was better welded. Sometimes, when the leak was small, I added air and fucked the doll harder so that it would finally burst with a bang when I reached orgasm.

                        I have an idea how to reinforce a cheap doll... It will be time-consuming, but the reinforcements will not be visible from the outside. You need to cut the doll in a place that allows you to get to the seams from the inside - the back, for example. The cut should not be large, but sufficient to turn the doll inside out. Use long strips of vinyl (from another broken doll) and vinyl glue to reinforce all the critical seams from the inside. Once the glue on the reinforcements has dried, close the cut you made earlier, and you're done. It's easier said than done, but in my opinion, it can be done, you just have to be patient.
                        This "ugly" doll is not ugly at all...

                        Comment

                        • inbox_pm
                          Senior Member
                          • Apr 2017
                          • 189

                          #13
                          Originally posted by glovepopper
                          I confirm that negative curves are the weakest points in dolls with more complex shapes than the flat missionary position. The doll from the photo below was probably an exception because it was cheap (~€5) but quite durable, perhaps because it was better welded. Sometimes, when the leak was small, I added air and fucked the doll harder so that it would finally burst with a bang when I reached orgasm.
                          Interesting, I never seen such type of dolls. In my country any inflatables are rare, but especially a dolls. The cheapest ones are similar to your 1'st photos, but their price here is $20 and above. To pop her with bang just in your orgasm moment is so cool!

                          Originally posted by glovepopper
                          I have an idea how to reinforce a cheap doll... It will be time-consuming, but the reinforcements will not be visible from the outside. You need to cut the doll in a place that allows you to get to the seams from the inside - the back, for example. The cut should not be large, but sufficient to turn the doll inside out. Use long strips of vinyl (from another broken doll) and vinyl glue to reinforce all the critical seams from the inside. Once the glue on the reinforcements has dried, close the cut you made earlier, and you're done. It's easier said than done, but in my opinion, it can be done, you just have to be patient.
                          I used a similar method for repairing a few toys (not dolls), glued two strips, inside and outside. A toy was already popped, so I glued an inner layer just through a hole, and then an outer layer, using the same color of vinyl

                          Comment

                          • Seasidelad
                            Senior Member
                            • Sep 2018
                            • 303

                            #14
                            I have one cheap doll that I use repaired the back hole and sometimes use when I have another inflatable to play around on.

                            Comment

                            • Big Thud Joe
                              Senior Member
                              • May 2017
                              • 407

                              #15
                              These dolls are always a complete turn-off for me, they just look goofy and nothing like a real persons proportions, strangely something they get right on life-size cartoon hero inflatable characters. Maybe because I'm more of a leg humping person, and love the way the legs come out on inflatable spidermans.

                              Comment

                              Working...