Some time ago I made a post where I wanted to do this. I asked if anyone knew what I'd need to measure the pressure in an inflatable. Here, someone went through the same query. He found online, as I did, conflicting information, and he had to kinda guess, like I did, what range pressure gauge to get. He chose the same one I did, 3 psi.
Here he describes his research and gauge, while his focus was on balloons.
Here's the testing on inflatables.
I wanted to see how tightly I had to inflate, say, an air mattress, to simulate having an 800 pound woman on it with me. I found it wasn't that simple. For one, overinflation stresses it more than weight alone does. I found that the effect of adding weight varies with how much pressure there already is. So, I found a pressure for a particular air mattress (a one-chamber 18-pocket mattress, the kind with an inline pillow rather than pillow on top), inflated a little more than most people would, and then loaded with me (480-ish pounds at the time) plus 800 pounds. It was about 1.9 PSI, if I recall. Then the objective was to overinflate it enough that I could achieve 1.9 psi with me on it but without the 800 pounds. It was something like 1.7 psi. That is, adding 480 pounds to 1.7 psi gave me 1.9 psi. Like, my weight hardly mattered. I could achieve the same thing just inflating it a little more.
Laying on an overinflated air mattress is exciting. It gives me that anticipation of a pop. It makes me wonder how the thing doesn't just burst. It makes boomy noises as my skin binds on it. All the things I like about stressing inflatables over an extended session. I don't like easy pops and I don't like punctures. I'm all about the stress. Overinflation gives me that.
But it's nothing like having an 800 pound woman on it with me. That is intangibly more exciting. Like, it would be abusing the inflatable doing this with two normal sized people, and we're abusing it way more than that. I'm not sure what exactly it is that is exciting about that. But for some reason, it's not the same with overinflation.
But back to measuring pressure, and what I think is happening with sitting on inflatables...
WHen you sit on an inflatable, you decrease its volume, which increases the pressure, which...increases its volume. As the vinyl stretches, you reach a new equilibrium. The pressure you achieve is always just less than the pressure it takes to stretch the vinyl. It will stop stretching when you achieve that volume. So, you add air and start the process again.
If you do this a lot you've probably discovered that there is a point where you are only stretching it a little bit. You get off it and it's soft, but it recovers quickly.
When you stretch the vinyl it has a memory and wants to go back, so it recovers. That's the temporary stretch. But if you've overloaded it, there's also some permanent stretch.
I wanted to measure all this, but I found that it just varies too much. There's such a small difference between enough pressure to permanently stretch an inflatable and enough pressure for a runaway stretch, that you can't measure it reliably. And it varies from toy to toy. By a lot.
I've found that the largest chamber stretches the most. When you lay on a one-chamber air mattress, the pillow stretches the most. It's partly because you displace air there, but at high pressure that doesn't really matter. What's really happening is the largest chamber, by circumference, is stretching the most. That'd be the pillow. The guy in this video found the same thing, testing different size toys. And if you get a two-chamber air mattress, youll find you can't get a runaway stretch in the tube end no matter how much pressure you put it under. It will just leak before it grows substantially. Because those are small-circumference chambers.
I could go on and on about sitting on one side of a swim ring, baffles limiting chamber size, etc, but likely nobody cares as much as I do. But those 18-pocket air mattresses? They hold a ridiculous amount of weight, and support high-pressure, because those pockets limit the size of the main chamber. The baffles in the pillow do the same thing. The baffles in all inflatables do that.
Whales don't have interior baffles, so they won't take a lot of pressure. Bigger beach balls are easier to blow pop than smaller ones, despite being made of thicker vinyl. It's the chamber size. Vinyl wants to stretch laterally. A tighter round takes more pressure.
Here he describes his research and gauge, while his focus was on balloons.
Here's the testing on inflatables.
I wanted to see how tightly I had to inflate, say, an air mattress, to simulate having an 800 pound woman on it with me. I found it wasn't that simple. For one, overinflation stresses it more than weight alone does. I found that the effect of adding weight varies with how much pressure there already is. So, I found a pressure for a particular air mattress (a one-chamber 18-pocket mattress, the kind with an inline pillow rather than pillow on top), inflated a little more than most people would, and then loaded with me (480-ish pounds at the time) plus 800 pounds. It was about 1.9 PSI, if I recall. Then the objective was to overinflate it enough that I could achieve 1.9 psi with me on it but without the 800 pounds. It was something like 1.7 psi. That is, adding 480 pounds to 1.7 psi gave me 1.9 psi. Like, my weight hardly mattered. I could achieve the same thing just inflating it a little more.
Laying on an overinflated air mattress is exciting. It gives me that anticipation of a pop. It makes me wonder how the thing doesn't just burst. It makes boomy noises as my skin binds on it. All the things I like about stressing inflatables over an extended session. I don't like easy pops and I don't like punctures. I'm all about the stress. Overinflation gives me that.
But it's nothing like having an 800 pound woman on it with me. That is intangibly more exciting. Like, it would be abusing the inflatable doing this with two normal sized people, and we're abusing it way more than that. I'm not sure what exactly it is that is exciting about that. But for some reason, it's not the same with overinflation.
But back to measuring pressure, and what I think is happening with sitting on inflatables...
WHen you sit on an inflatable, you decrease its volume, which increases the pressure, which...increases its volume. As the vinyl stretches, you reach a new equilibrium. The pressure you achieve is always just less than the pressure it takes to stretch the vinyl. It will stop stretching when you achieve that volume. So, you add air and start the process again.
If you do this a lot you've probably discovered that there is a point where you are only stretching it a little bit. You get off it and it's soft, but it recovers quickly.
When you stretch the vinyl it has a memory and wants to go back, so it recovers. That's the temporary stretch. But if you've overloaded it, there's also some permanent stretch.
I wanted to measure all this, but I found that it just varies too much. There's such a small difference between enough pressure to permanently stretch an inflatable and enough pressure for a runaway stretch, that you can't measure it reliably. And it varies from toy to toy. By a lot.
I've found that the largest chamber stretches the most. When you lay on a one-chamber air mattress, the pillow stretches the most. It's partly because you displace air there, but at high pressure that doesn't really matter. What's really happening is the largest chamber, by circumference, is stretching the most. That'd be the pillow. The guy in this video found the same thing, testing different size toys. And if you get a two-chamber air mattress, youll find you can't get a runaway stretch in the tube end no matter how much pressure you put it under. It will just leak before it grows substantially. Because those are small-circumference chambers.
I could go on and on about sitting on one side of a swim ring, baffles limiting chamber size, etc, but likely nobody cares as much as I do. But those 18-pocket air mattresses? They hold a ridiculous amount of weight, and support high-pressure, because those pockets limit the size of the main chamber. The baffles in the pillow do the same thing. The baffles in all inflatables do that.
Whales don't have interior baffles, so they won't take a lot of pressure. Bigger beach balls are easier to blow pop than smaller ones, despite being made of thicker vinyl. It's the chamber size. Vinyl wants to stretch laterally. A tighter round takes more pressure.
Comment