Maintaining balloons

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • balloonPatcher
    Senior Member
    • Jun 2020
    • 291

    #16
    Originally posted by Hazloon24

    Sadly my current living situation means I cannot leave them up for very long, I might inflate them, have a play then have to put them back without much maintenance. I will definitely take much more care going forward. Is corn starch the same as talcum powder? I am using a talcum-like powder which I would like to change if possible. Thank you!
    There is a controversy with talcum powder possibly containing asbestos. Corn starch is safer in that regard and it is edible too.

    Comment

    • Guest

      #17
      Corn starch works but, unlike talc, only in (as near as possible) a 0% moisture environment, else it can grow mold all on its own. Inside of a slightly moist balloon? Not good.

      I made the small investment of a blow dryer for dog groomers. It blows up anything quickly, including hoppers, and even has a warm air switch. Moisture is never an issue. Worth it.

      Comment

      • Hazloon24
        Senior Member
        • Jun 2023
        • 150

        #18
        Originally posted by Merl
        Corn starch works but, unlike talc, only in (as near as possible) a 0% moisture environment, else it can grow mold all on its own. Inside of a slightly moist balloon? Not good.

        I made the small investment of a blow dryer for dog groomers. It blows up anything quickly, including hoppers, and even has a warm air switch. Moisture is never an issue. Worth it.
        I might have to think about a dryer of sorts, could also use it for drying my hair too, haha! Do you use an attachment for inflating things with it? or is it relatively small

        Comment

        • Guest

          #19
          This is similar to mine. They're all basically the same. About $100 on sale but it's been worth it. Not very loud too. Screenshot_20240307_182922_Brave.jpg
          ​​​​
          ​image widget

          Comment

          • Hazloon24
            Senior Member
            • Jun 2023
            • 150

            #20
            Originally posted by Merl
            This is similar to mine. They're all basically the same. About $100 on sale but it's been worth it. Not very loud too. Screenshot_20240307_182922_Brave.jpg
            ​​​
            ​image widget
            Will definitely consider it, or even then will look at a hair dryer as I could do with one of those anyway, thank you!

            Comment

            • Guest

              #21
              Oh, that smallest round nozzle you see inflates everything I use. Smaller necks just need stretched over it.

              Comment

              • Hazloon24
                Senior Member
                • Jun 2023
                • 150

                #22
                Originally posted by Merl
                Oh, that smallest round nozzle you see inflates everything I use. Smaller necks just need stretched over it.
                It seemed like it would yeah! I use a hand pump at the moment, but it can be a pain as normally it requires being held down by feet (sometimes I like to lay down instead) or the nozzle/pipe tangles and tangles the neck up too.

                Comment

                • latretter
                  Junior Member
                  • Jan 2021
                  • 14

                  #23
                  Originally posted by balloonPatcher

                  There is a controversy with talcum powder possibly containing asbestos. Corn starch is safer in that regard and it is edible too.
                  That's why you should use chalk powder. Talcum powder was never good at absorbing moisture anyway.

                  Comment

                  • lucid
                    Senior Member
                    • Sep 2016
                    • 1174

                    #24
                    Originally posted by Merl
                    This is similar to mine. They're all basically the same. About $100 on sale but it's been worth it. Not very loud too. Screenshot_20240307_182922_Brave.jpg
                    ​​​
                    ​image widget

                    Wow Merl what a great idea! I'm probably gonna have to get one of those. Does it blow pretty forcefully? As in, can it also handle the more difficult balloons to inflate or do you have to get them started some other way 1st?

                    As far as maintenance goes, I dont do much with the vast majority of my balloons. If they are lucky enough to survive the session with my GF, I usually leave them inflated until next time. For balloons that have been discontinued or are more expensive, i usually shrink them back down with hot water. Then make sure it is completely dry before I throw it in the ammo can. There's a company called "MTM" that makes really good plastic ammo cans which have a rubber gasket around the rim which seals it up from light and air. Then I'll throw a few oxygen absorbers in with them like you would ammunition to keep it good. Balloons I've stored in this manner haven't gone bad yet.

                    Comment

                    • Guest

                      #25
                      Originally posted by lucid


                      Wow Merl what a great idea! I'm probably gonna have to get one of those. Does it blow pretty forcefully? As in, can it also handle the more difficult balloons to inflate or do you have to get them started some other way 1st?

                      It's forceful enough for any balloon, so much so that you must be REALLY careful with smaller ones that don't inflate and bust before you can shut it off. A 24" inflates in about 5 seconds, amd that's on the lowest setting.

                      Comment

                      • Dude1234
                        Senior Member
                        • Sep 2017
                        • 356

                        #26
                        I tried the hot tap water trick and it didn't work. Gonna try boiled water next to see if it's my taps not getting hot enough

                        Comment

                        • Ardov3275
                          Senior Member
                          • Mar 2024
                          • 133

                          #27
                          My wife gave me 30 helium balloons for my 30th birthday. After a few days I untied them, washed and rinsed well in the sink, threw them into a pillow case and tossed them the the clothes dryer. Once dry, and shrunk down to original size, I put a little powder into the bag and shook that around. A couple were no good, but most were almost back to pre-inflation condition.

                          Comment

                          • BigBreathless
                            Senior Member
                            • Jun 2017
                            • 131

                            #28
                            I played with one of my 100" balloons and ended up stretching it unevenly around the neck because I used it to squeeze myself inside a duvet cover. A hair dryer treatment shrunk it back somewhat but I am afraid that it´s impossible to return it to original condition now... such a shame, really. Any tips are appreaciated!

                            Comment

                            • bigloonfucker.cz
                              Punk member
                              • Nov 2023
                              • 145

                              #29
                              Originally posted by balloonPatcher

                              There is a controversy with talcum powder possibly containing asbestos. Corn starch is safer in that regard and it is edible too.
                              Talc possibly or definitely contains azbestos? I never heard about it, i use talc much when restarting balloons. Sometimes while riding them too. But better avoid talc than cancer...
                              The softer balloon the better. When not soft enough, I bake him untill success

                              Comment

                              • Guest

                                #30
                                It's very difficult to find out how much asbestos, if any, is in this or that brand of talc but it's usually minimal even if it's present.

                                Also, mesothelioma takes extended and usually heavy exposure to actual asbestos to cause problems years or decades later (and even then it doesn't always, just as many lifelong smokers never develop cancer).

                                It's not like you'll be unwisely breathing in clouds of talc, so I wouldn't sweat the tiny amounts used to coat balloons.

                                Comment

                                Working...