Maintaining balloons

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hazloon24
    Senior Member
    • Jun 2023
    • 150

    Maintaining balloons

    Hi all!

    A novice looner just curious to know how you all maintain balloons that you use.

    This can mean things like keeping them clean, preventing them from sticking together (had some form smal holes when trying to carefully peel them), how they are stored, and so on!

    I am also curious about heat treating as some have mentioned before, and what the benefits of this can be.

    Any insight is always appreciated!

    Thanks!
  • OneTrickPony
    Senior Member
    • Feb 2024
    • 170

    #2
    I also wanna know this.
    For now, I just keep then in the bag they came in, in a dry and dark place, but I think I could do better.
    Tips for us who blow by mouth and get saliva on the balloons are appreciated, Idk if you're supposed to dry them first? Or what to do
    ​​​​​
    "It's dangerous to go alone! Take this."
    ​
    * You obtained 1 Balloon *

    Comment

    • Axle
      Senior Member
      • Jan 2022
      • 263

      #3
      i inflate by pump 99% of the time and shrink them down on the radiator when i'm done. store in a cool dry dark place, many people also store their stash in air tight ziplock bags as well.

      i have some balloons from 15+ years ago that are still going strong so one or more of those things seem to be doing the trick.

      sadly for hoarding non-poppers like myself mouth inflation though fun can be a killer in the long term, blasting some talcum powder into the inside can help combat the wetness and stickiness a bit but eventually they'll degrade from exposure to moisture. if you've ever blown up a 36 entirely with breath you'll know just how wet they get inside!
      Curiosity killed the cattex.

      Comment

      • Guest

        #4
        Inflation: since 99% of the time I use 24s, inflation is by pump only. That means being stored with moisture inside isn't an issue.

        After use: I always shrink them back to size under hot water, then let them air dry. I have no idea if this helps preserve them or not, I just like to do it.

        Storage: nothing special. Once dried they all live in an open ziploc bag inside a drawer. I rarely powder them, and if I do it's only to improve the feel of rougher loons (most don't need it and sticking together hasn't been a problem anyway).

        Comment

        • Hazloon24
          Senior Member
          • Jun 2023
          • 150

          #5
          Originally posted by Axle
          i inflate by pump 99% of the time and shrink them down on the radiator when i'm done. store in a cool dry dark place, many people also store their stash in air tight ziplock bags as well.

          i have some balloons from 15+ years ago that are still going strong so one or more of those things seem to be doing the trick.

          sadly for hoarding non-poppers like myself mouth inflation though fun can be a killer in the long term, blasting some talcum powder into the inside can help combat the wetness and stickiness a bit but eventually they'll degrade from exposure to moisture. if you've ever blown up a 36 entirely with breath you'll know just how wet they get inside!
          Very helpful! Unfortunately I do not have any radiators, would you have any other ideas that might work for keeping them dry?

          Comment

          • Hazloon24
            Senior Member
            • Jun 2023
            • 150

            #6
            Originally posted by Merl
            Inflation: since 99% of the time I use 24s, inflation is by pump only. That means being stored with moisture inside isn't an issue.

            After use: I always shrink them back to size under hot water, then let them air dry. I have no idea if this helps preserve them or not, I just like to do it.

            Storage: nothing special. Once dried they all live in an open ziploc bag inside a drawer. I rarely powder them, and if I do it's only to improve the feel of rougher loons (most don't need it and sticking together hasn't been a problem anyway).
            How long do you keep them under hot water? I have tried before, but they did not shrink down much, or does it need to be done pretty soon after use? Thank you!

            Comment

            • Guest

              #7
              Originally posted by Hazloon24

              How long do you keep them under hot water? I have tried before, but they did not shrink down much, or does it need to be done pretty soon after use? Thank you!
              It's instant shrinkage as soon as very hot tap water touches it. How much it shrinks back probably depends on the latex formulation, that might explain your trouble. Mine go almost back to their original size...not exactly the original size but very close.

              It also hasn't made any difference how soon it's done, in my experience. They can wait weeks and will still shrink.

              Comment

              • Dust of the Saturn
                Stretched like space-time
                • Feb 2018
                • 411

                #8
                if you're doing mouth inflations, just remember to store used and fresh balloons in separate containers. Moisture from used balloons can evaporate and create a humid environment inside the container which can spoil even your fresh ones.

                Aside from that, there's not much you can do. Used balloons are bound to go bad so use them first.
                Stretched like space-time

                Comment

                • Guest

                  #9
                  Originally posted by Hazloon24

                  Very helpful! Unfortunately I do not have any radiators, would you have any other ideas that might work for keeping them dry?
                  I find a 5 - 10 min blast with a hair dryer on a medium setting works well. Dries them out and the heat shrinks them almost back to original size. They feel strechier on the next inflation too.

                  Comment

                  • balloonPatcher
                    Senior Member
                    • Jun 2020
                    • 291

                    #10
                    I inflate all my balloons by mouth. The condensate seems to disappear if the balloon is left inflated for a couple of hours. If I deflate a balloon sooner I turn it inside out and dry it off and powder with a bit of corn starch. As a non popper most of my balloons keep for several years. I have some stored in plastic containers and others in cloth bags. The chlorinated latex lasts much longer than regular latex. It seems to prevent the aspergillus fungal rot that eats the latex. My guess is to rinse the inside and outside of the balloon with chlorine bleach before putting it in a cool dry place for long-term storage.

                    Comment

                    • Hazloon24
                      Senior Member
                      • Jun 2023
                      • 150

                      #11
                      Originally posted by Merl

                      It's instant shrinkage as soon as very hot tap water touches it. How much it shrinks back probably depends on the latex formulation, that might explain your trouble. Mine go almost back to their original size...not exactly the original size but very close.

                      It also hasn't made any difference how soon it's done, in my experience. They can wait weeks and will still shrink.
                      I noticed that today, I waited for the water to a lot hotter than normal, and they did in fact shrink down, I had a 24" TT which after use went back to pretty much how it looked before its first inflation. It must have been how hot that water was when I last tried. Thanks!

                      Comment

                      • Hazloon24
                        Senior Member
                        • Jun 2023
                        • 150

                        #12
                        Originally posted by Dust of the Saturn
                        if you're doing mouth inflations, just remember to store used and fresh balloons in separate containers. Moisture from used balloons can evaporate and create a humid environment inside the container which can spoil even your fresh ones.

                        Aside from that, there's not much you can do. Used balloons are bound to go bad so use them first.
                        Definitely something I am learning from as time goes by, some balloons I had recently developed a mold inside the bag they were in, even though they were inside a container. It might not help that my bedroom gets incredibly cold this time of year. They went straight in the bin, no risks taken there!

                        Comment

                        • Hazloon24
                          Senior Member
                          • Jun 2023
                          • 150

                          #13
                          Originally posted by BlowPlayPop

                          I find a 5 - 10 min blast with a hair dryer on a medium setting works well. Dries them out and the heat shrinks them almost back to original size. They feel strechier on the next inflation too.
                          I might have to invest in a hair dryer then!

                          Comment

                          • Hazloon24
                            Senior Member
                            • Jun 2023
                            • 150

                            #14
                            Originally posted by balloonPatcher
                            I inflate all my balloons by mouth. The condensate seems to disappear if the balloon is left inflated for a couple of hours. If I deflate a balloon sooner I turn it inside out and dry it off and powder with a bit of corn starch. As a non popper most of my balloons keep for several years. I have some stored in plastic containers and others in cloth bags. The chlorinated latex lasts much longer than regular latex. It seems to prevent the aspergillus fungal rot that eats the latex. My guess is to rinse the inside and outside of the balloon with chlorine bleach before putting it in a cool dry place for long-term storage.
                            Sadly my current living situation means I cannot leave them up for very long, I might inflate them, have a play then have to put them back without much maintenance. I will definitely take much more care going forward. Is corn starch the same as talcum powder? I am using a talcum-like powder which I would like to change if possible. Thank you!

                            Comment

                            • Guest

                              #15
                              Originally posted by Hazloon24

                              I noticed that today, I waited for the water to a lot hotter than normal, and they did in fact shrink down, I had a 24" TT which after use went back to pretty much how it looked before its first inflation. It must have been how hot that water was when I last tried. Thanks!
                              Glad it worked!

                              Comment

                              Working...