Hello folks,
it's nice too see that the world of people who love inflateables is bigger then expected. At first I felt pretty lonely with a weird fetish for anything that can expand.
So for new people joining the fetish I wanna share my tips and tricks, what I think is pretty usefull when you get started with inflateables.
First things first: Who am I?
Im Nick, 24 years old from Germany. Im into looning since i was 6 or 7. In the early days I liked to blow up balloons and be amazed how big some can get. Especially the old MC Donalds Balloons who were blown super tight by the employess amazed me as a kid.
But im not only into balloons im also into pvc inflateables and other stuff, anything that is inflation related. I prefer no popping when I have my sessions but also I like to see others pop balloons in fetish related videos.
Enough about myself, here are some of the tips I can give you when you start playing with inflateables and stuff:
1. Dont be shy because of your fetish!
As you can see in this Forum, on Youtube and many other sites and even Discord servers. There are many looner and inflateable lover people out there.
You are not alone and its nothing too be ashamed of. Nearly every person got a fetish. Be proud of yourself!
2. Where do I get inflateables from?
Most of the time you can get good inflateables/balloons on local Shops.
In the beginning of my looner carrier, I bought bags of balloons and blown then up just too take a ride on them.
An cheap alternative are garbage bags filled with air. They are available in reasonable sizes and can be nice too ride. Only downside is, they don't last very long and tend to pop very fast, especially when you are heavier.
An idea would be too put 2-3 garbage bags inside each other too strengthen them.
When you wanna ride something but don't wanna produce much waste, you can use exercise Balls and only inflate them a little. If you put it on the corner of your bed and you sit on it, it feels really nice. If you got a good quality hand pump, you can even inflate it while sitting on it!
Last but not least are the "premium" inflateables. There are many inflateable producers out there (I will list some of them later). I really like the different forms made for riding. Beach balls are mostly super cheap, so they are perfect for expermenting. Another thing often mentioned here are air matresses. Downside for them is, if you overinflate them too much the support seams tend to pop and the entire matress bulges, so take care of that!
3. Which manufactures are any good?
PVC Inflateables:
For cheap inflateables that you dont need too really take care of, and maybe the best for beginning you should go with the Intex Brand. Intex has good Beach Balls and the famous Whale. They can hold a lot of pressure you can easily overinflate and heat stretch them, or even modify them to your needs no problem. I wouldn't recommend you from buying from Amazon, since it's most of the time more expensive them buying from the original seller itself or another website.
Shipping depends on where you order
If you want more advanced and complicated inflateables, that are not too expensive, I would recommend Inflateable World.
Inflateable World (IW) is a german seller of inflateables. They deliver too nearly every country. But there is also a trick if you get a seller that only ships too german adresses/ EU adresses, which I will show to you later.
I got many inflateables from IW, such as the big FyaRuu Dragon, the big Rings, a giant 5m Whale and one of their horses.
All of their inflateables are made out of soft pvc and are definitly nice too the touch. Only down side is, my big dragon popped twice at a seam at his tail and I needed too patch it. Besides that, I can only recommend their store for everyone who wants relativly cheap and useable inflateables. Sadly at the moment they are out of stock with most of their things. But hopefully they will restock pretty soon, even with new Items!
Shipping in germany is about 1-2 days so pretty fast!
And if you want customized or real big inflateables, i can recommend Hongyi.
Hongyi is based in China and a custom inflateable factory. You show them what you want, they make it. Every color, every Shape, every size. In total i got 3 inflateables and the 4. in the making.
First is a classic Goodra* (about 2m costing 590$)
Second was a big orange Dragon* (about 3m costing 560$)
Third one was a big inflateable Sofa (custom sized costing 530$)
Fourth one will be a big sea dragon (about 3m 360$)
* Both included an SPH (Love hole). One SPH cost 30$
Shipping for all 4 things is about 100$ and about 45$ paypal fees. You can get free shipping, when they have their sales events.
If you want a catalouge you can just ask them directly or look on their Alibaba page.
The things are maybe expensive but the quality is very good. Only my goodra developed a small leak after I really overinflated it and ride it. But it was easily patched.
The Production time is about 10-20 work day depending on how many orders they currently have. The support is super friendly and helps with problems.
If you can't pay your inflateable in one part, you can make a deposit (about 100$) when they have their free shipping event, too save the order. And as soon as you payed half of the total amount they will start producing whatever you want. When they got the rest of the money, they will ship it directly to you. Shipping to germany is about 3-6 working days.
Balloons:
Spoiler: Im not the most experienced Person with Balloons, so maybe the things I will state here are wrong or just not up to date.
First of all there are cheap balloons you can get in every super market and online store. Probably the best to start off with balloons. They are cheap and high quantity available. When they pop, its no big lose. Some can hold quite a much some can't, you need too try out what you like most.
Then there is a branded Balloons like Cattex.
I personally never had a cattex balloon but many other on this forum and other friends that have a balloon fetish got one. They seem to be decent quality for good price, espcially the long neck balloons can hold quite much when riding or something. I consider the price as okay. Maybe 4$ sounds much for a simple balloon, they can be quite fun.
One thing I personally like is big balloons. I bought some from EBay from a seller named looner world. They sell all different kinds of balloons, personally i bought some of their giant climb in balloons. With 18$ each, they are maybe not cheap, but definitly can hold a lot. If you put multiply into each other and don't inflate them too much, you can even sit on them! It really feels much more amazing then a normal gym ball.
Besides that the other balloons of them have a good quality too and the shipping is fast.
If you want even bigger balloons that are in sizes of 3m+ you can buy weather balloons. Personally, I got several 3m weather balloons, but I was too scared of inflating them too the brim, since they get huge. They fill my room too the roof no problem. You can either get them cheap on ebay or if you wanna go even bigger in the sizes of 14m (they cost 800$ so you maybe wanna go smaller lol), you can go to stratoflights. They offer many different giant balloon sized. Cheapest are about 30€ for 3m, but for 100€ you will get nearly 8m size, which is already pretty big.
Important too note: Balloons and espacially weather balloons are known too decay when you unpack and inflate them. If you are a non popper you need too take care, that you store them protected from (UV) light and Airtight, so they last long. Still you can't expect a balloon to last as long as a pvc pool toy. But they are still quite some fun to do.
4. Alternate Balloons
There are some alternatives too the classic balloon when it comes too inflation.
Disposal Glooves
Probably a good cheap way too build water bombs and cheap air inflateables.
You mostly get them in bags of 100 for cheap. I popped quite a lot of those and it quite some fun. Also you can use them for normal stuff as well, so its win/win.
Latex glooves are soft even at huge sizes (when filled with water)
Condoms
You can reach quite good sizes easy. If you fill them with water, they will pop faster but with a simple trick you can make them gigantic and super soft.
Just put 3-4 condoms into each other tie them with an rope to a hose. Stretch the top condom a little more back and tie it directly on the hose.
Now you can start the water and the condom inside will fill up. They will be very stiff in that stage. If you now loose the rope (dont remove it!) that holds the inner condoms in place, you will see that they will get smaller and the water gets into the next outer condom.
When you are lucky, the condom on the outside will get super soft and super big since it gets super stretched.
If the outside condom then pops you can reuse the condoms from the inside so you dont waste as much.
(I hope all this was understandable
)
5. Pumps
Usually there are 2 types of pumps, electrical pumps and manual pumps. Both have a big variety of manufactures and types.
First let us talk about:
Manual Pumps:
As the name implies, manual pumps need too be operated by yourself. That can be quite annoying if you want to pump up a big inflateable or a big balloon, since it can hold much air. Also there are pumps that have one way valves build in and some that doesn't.
Personally I like my Intex Double Quick III the most. It has an inflate and deflater and inflates/deflates very very fast. Also you can get some pressure with it. Only downside, its super small. I recommend using it while sitting in a chair too save your back.
Besides that i got a "Air Hammer" from Bestway. Sadly it doesn't have a one way valve built in and it's small too. But for the size, its a fast pump.
And last is a foot pump that I use from time to time. Quite fast and a good workout for your legs. I think its from Bestway but I dont really remember anymore.
All those pumps are not that expensive and are relativly quiet with high air volume. You should definitly get one of the 3 pumps when you wanna inflate stuff quick.
Well and then there are
Electrical Pumps
First when I discovered that there are electrical pumps, I was like: Wow it will make inflating so much easier! And yes they do, but it comes with the cost of noise, a lot of noise.
I tried quite a lot of electrical pumps but all got the same problem. They were loud as hell. Even 12V Car Pumps or battery driven pumps.
A couple of months ago I found a way too make my pump somewhat silent, so I can blow up my inflateables at any time that I want without my neighbours sueing me out of the house.
First things first, we need too talk about how these electrical pump are build.
Mainly they got 3 parts: Intake -> Motor -> Exhaust. To make a pump silent you need too silence all 3 parts of the pump.
Lets start with what we need too make the pump silent:
The Pump that I use is from Amazon (ASIN: B09M8JXVH2). In normal operation its quiete loud you can hear it through the entire house.
One big advantage this pump has is, that you can connect a hose to the input and output of the pump and that is thermical protected (when it gets too hot it turns itself off until it cools down). Sadly we cant get the connectors for this pump seperatly so we need to buy this one 2 times, since its relativly cheap, its no big deal. (Hongyi got an similar pump, maybe someone can check if they sell the hose adapter seperatly)
Also since, we will burry the pump, we will need longer hoses. For my pump I bought 2m (inlet) and 6m (outlet) of hose (ASIN: B001Q8B202). The diameter isn't a perfect fit but still enough too fit the hose parts on.
Now the real deal is, we will undervolt the pump, to make the motor spin slower and so make less noise. For that we will use a Variac (ASIN: B07ZRN6T6K) (That's the one I use. It works fine but seems to be a little cheaply made, I replaced the cord with a longer one and planning on replacing the outlet against a better one).
To monitor the heat of the pump I recommend using at least 1 temperature sensor (ASIN: B07WZQSFCL). Its not needed since the pump is thermal protected but it's still recommended!
With that we can now build our super silent pump:
First things first, put some old clothing into a package (make it about half full) then cut 2 onto opposite sides. The holes will be our inlet and outlet so make them big enough too fit the hoses through!
If you bought a temperature sensor you should tape it onto the body of the pump.
Now put the pump inside and connect our selfmade hoses with the adapters onto it. In best case you want too tape the hoses onto the package so it wont come out. Make sure that the switch on the pump is set to On!
Put more clothing onto the pump until the box is entirely full! Make sure all the cables are on the outside of the box before you close it and tape it really good.
For a first test, you can connect the pump directly too the outlet don't let it run too long or the pump will overheat and shut off.
If everything works fine, you need too find a place where you can put the box with the pump to. For me the perfect place was under my bed, since there is much empty space and a big matress above it which will absorb much noise.
In best case, you can even put more clothes blankets and other stuff around the box so it gets even more silent.
Since we only want too use our outlet, you can let the inlet stay under the bed. But make sure its free and can suck air in! The Outlet you can move too your desired position and put the other adapter and nozzle on.
If the adapter doesn't fit, put some rounds of duck tape on the hose and then screw the adapter onto it.
Now you can simply connect your pump to your Triac and turn it on. It may happens that the Pump doesn't start too spin on voltages under 50 Volts. Thats entirely normal, just crank up the voltage for a moment and turn it right down. I can operate my pump up to 50V without getting noise issues.
Minimum is about 25V before the pump stops. (I recommend using 30V-40V so the motor doesn't get too hot)
Now you should have a perfect silent pump. You might not get the same output pressure as when you put the pump directly on 230V AC, but it should be enough too pump up balloons and big inflateables.
Let the pump have a break every once in a while so it doesn't overheat and destroy itself. It will definitly increase the life span of your pump. Also monitor the temperature by your thermal probe and the air that comes out of the hose.
Thats how I got my pump so silent, that you cant hear or barely hear it in the next room. And yes the amount of air is still quite good and it can pump up stuff very fast.
6. Deflation
When you are done with your session and you wanna make some room and put away your inflateables you need too deflate them.
If you got a inflateable without a safety valve or a removeable safety valve this is quite easy.
For Hongyi Toys you got a "Valve in Valve" thingy. The black thing allows air only too go into toys. You can take it out and uninflate it very easy.
For Inflateable World toys you are maybe not so lucky. Some inflateables got a simlar technique as Hongyi toys but most of them have a safety valve, which can be quite annoying to deflate.
For that case, you should remove the flap that keeps the air inside before inflating the toy. (I think this Videos showes it really good: https://www.youtube.com/watch?v=eQoV6w_nuSQ )
Now when you let all the air out it is recommended too suck the rest of the air out of the toy, so it doesnt take up as much space. For that you can use the Intex Double Quick III Pump mentioned earlier.
If you got a Hongyi Toy the valve is too big for the pump, but thats not a big problem. Just take one of the black valves and remove the little rubber flap (you can easy pull it out and put it back in later, or you order some extra from Hongyi).
Now put it into the champer you wanna deflate and connect it too your Intex pump and start the deflation process. After you are done you put in a original black one way valve with the rubber flap installed in and close it up as fast as you can. When you repeat that for all chambers all your toys will take up way less space.
7. Some random stuff I noticed
- I already mentioned these Black Hongyi one way valves. Some of them can be squeaky for some reason. If you put on some lotion on them they will stop squeaking.
- If a online shop only ships to the EU or Germany but you are not based here, you can get a german adress for free. Just use mailboxde.com
They will give you an adress where you can receive parcels at and they will forward it too you, wherever you life. It's free just the forwarding costs a little money extra.
Well that's it for now.
Sorry for this big wall of text
I just wanted too share all my inflating experience with you. If you got anything too add feel free too write an reply on this post or write me an DM.
Thanks for reading
it's nice too see that the world of people who love inflateables is bigger then expected. At first I felt pretty lonely with a weird fetish for anything that can expand.
So for new people joining the fetish I wanna share my tips and tricks, what I think is pretty usefull when you get started with inflateables.
First things first: Who am I?
Im Nick, 24 years old from Germany. Im into looning since i was 6 or 7. In the early days I liked to blow up balloons and be amazed how big some can get. Especially the old MC Donalds Balloons who were blown super tight by the employess amazed me as a kid.
But im not only into balloons im also into pvc inflateables and other stuff, anything that is inflation related. I prefer no popping when I have my sessions but also I like to see others pop balloons in fetish related videos.
Enough about myself, here are some of the tips I can give you when you start playing with inflateables and stuff:
1. Dont be shy because of your fetish!
As you can see in this Forum, on Youtube and many other sites and even Discord servers. There are many looner and inflateable lover people out there.
You are not alone and its nothing too be ashamed of. Nearly every person got a fetish. Be proud of yourself!
2. Where do I get inflateables from?
Most of the time you can get good inflateables/balloons on local Shops.
In the beginning of my looner carrier, I bought bags of balloons and blown then up just too take a ride on them.
An cheap alternative are garbage bags filled with air. They are available in reasonable sizes and can be nice too ride. Only downside is, they don't last very long and tend to pop very fast, especially when you are heavier.
An idea would be too put 2-3 garbage bags inside each other too strengthen them.
When you wanna ride something but don't wanna produce much waste, you can use exercise Balls and only inflate them a little. If you put it on the corner of your bed and you sit on it, it feels really nice. If you got a good quality hand pump, you can even inflate it while sitting on it!
Last but not least are the "premium" inflateables. There are many inflateable producers out there (I will list some of them later). I really like the different forms made for riding. Beach balls are mostly super cheap, so they are perfect for expermenting. Another thing often mentioned here are air matresses. Downside for them is, if you overinflate them too much the support seams tend to pop and the entire matress bulges, so take care of that!
3. Which manufactures are any good?
PVC Inflateables:
For cheap inflateables that you dont need too really take care of, and maybe the best for beginning you should go with the Intex Brand. Intex has good Beach Balls and the famous Whale. They can hold a lot of pressure you can easily overinflate and heat stretch them, or even modify them to your needs no problem. I wouldn't recommend you from buying from Amazon, since it's most of the time more expensive them buying from the original seller itself or another website.
Shipping depends on where you order
If you want more advanced and complicated inflateables, that are not too expensive, I would recommend Inflateable World.
Inflateable World (IW) is a german seller of inflateables. They deliver too nearly every country. But there is also a trick if you get a seller that only ships too german adresses/ EU adresses, which I will show to you later.
I got many inflateables from IW, such as the big FyaRuu Dragon, the big Rings, a giant 5m Whale and one of their horses.
All of their inflateables are made out of soft pvc and are definitly nice too the touch. Only down side is, my big dragon popped twice at a seam at his tail and I needed too patch it. Besides that, I can only recommend their store for everyone who wants relativly cheap and useable inflateables. Sadly at the moment they are out of stock with most of their things. But hopefully they will restock pretty soon, even with new Items!
Shipping in germany is about 1-2 days so pretty fast!
And if you want customized or real big inflateables, i can recommend Hongyi.
Hongyi is based in China and a custom inflateable factory. You show them what you want, they make it. Every color, every Shape, every size. In total i got 3 inflateables and the 4. in the making.
First is a classic Goodra* (about 2m costing 590$)
Second was a big orange Dragon* (about 3m costing 560$)
Third one was a big inflateable Sofa (custom sized costing 530$)
Fourth one will be a big sea dragon (about 3m 360$)
* Both included an SPH (Love hole). One SPH cost 30$
Shipping for all 4 things is about 100$ and about 45$ paypal fees. You can get free shipping, when they have their sales events.
If you want a catalouge you can just ask them directly or look on their Alibaba page.
The things are maybe expensive but the quality is very good. Only my goodra developed a small leak after I really overinflated it and ride it. But it was easily patched.
The Production time is about 10-20 work day depending on how many orders they currently have. The support is super friendly and helps with problems.
If you can't pay your inflateable in one part, you can make a deposit (about 100$) when they have their free shipping event, too save the order. And as soon as you payed half of the total amount they will start producing whatever you want. When they got the rest of the money, they will ship it directly to you. Shipping to germany is about 3-6 working days.
Balloons:
Spoiler: Im not the most experienced Person with Balloons, so maybe the things I will state here are wrong or just not up to date.
First of all there are cheap balloons you can get in every super market and online store. Probably the best to start off with balloons. They are cheap and high quantity available. When they pop, its no big lose. Some can hold quite a much some can't, you need too try out what you like most.
Then there is a branded Balloons like Cattex.
I personally never had a cattex balloon but many other on this forum and other friends that have a balloon fetish got one. They seem to be decent quality for good price, espcially the long neck balloons can hold quite much when riding or something. I consider the price as okay. Maybe 4$ sounds much for a simple balloon, they can be quite fun.
One thing I personally like is big balloons. I bought some from EBay from a seller named looner world. They sell all different kinds of balloons, personally i bought some of their giant climb in balloons. With 18$ each, they are maybe not cheap, but definitly can hold a lot. If you put multiply into each other and don't inflate them too much, you can even sit on them! It really feels much more amazing then a normal gym ball.
Besides that the other balloons of them have a good quality too and the shipping is fast.
If you want even bigger balloons that are in sizes of 3m+ you can buy weather balloons. Personally, I got several 3m weather balloons, but I was too scared of inflating them too the brim, since they get huge. They fill my room too the roof no problem. You can either get them cheap on ebay or if you wanna go even bigger in the sizes of 14m (they cost 800$ so you maybe wanna go smaller lol), you can go to stratoflights. They offer many different giant balloon sized. Cheapest are about 30€ for 3m, but for 100€ you will get nearly 8m size, which is already pretty big.
Important too note: Balloons and espacially weather balloons are known too decay when you unpack and inflate them. If you are a non popper you need too take care, that you store them protected from (UV) light and Airtight, so they last long. Still you can't expect a balloon to last as long as a pvc pool toy. But they are still quite some fun to do.
4. Alternate Balloons
There are some alternatives too the classic balloon when it comes too inflation.
Disposal Glooves
Probably a good cheap way too build water bombs and cheap air inflateables.
You mostly get them in bags of 100 for cheap. I popped quite a lot of those and it quite some fun. Also you can use them for normal stuff as well, so its win/win.
Latex glooves are soft even at huge sizes (when filled with water)
Condoms
You can reach quite good sizes easy. If you fill them with water, they will pop faster but with a simple trick you can make them gigantic and super soft.
Just put 3-4 condoms into each other tie them with an rope to a hose. Stretch the top condom a little more back and tie it directly on the hose.
Now you can start the water and the condom inside will fill up. They will be very stiff in that stage. If you now loose the rope (dont remove it!) that holds the inner condoms in place, you will see that they will get smaller and the water gets into the next outer condom.
When you are lucky, the condom on the outside will get super soft and super big since it gets super stretched.
If the outside condom then pops you can reuse the condoms from the inside so you dont waste as much.
(I hope all this was understandable
)5. Pumps
Usually there are 2 types of pumps, electrical pumps and manual pumps. Both have a big variety of manufactures and types.
First let us talk about:
Manual Pumps:
As the name implies, manual pumps need too be operated by yourself. That can be quite annoying if you want to pump up a big inflateable or a big balloon, since it can hold much air. Also there are pumps that have one way valves build in and some that doesn't.
Personally I like my Intex Double Quick III the most. It has an inflate and deflater and inflates/deflates very very fast. Also you can get some pressure with it. Only downside, its super small. I recommend using it while sitting in a chair too save your back.
Besides that i got a "Air Hammer" from Bestway. Sadly it doesn't have a one way valve built in and it's small too. But for the size, its a fast pump.
And last is a foot pump that I use from time to time. Quite fast and a good workout for your legs. I think its from Bestway but I dont really remember anymore.
All those pumps are not that expensive and are relativly quiet with high air volume. You should definitly get one of the 3 pumps when you wanna inflate stuff quick.
Well and then there are
Electrical Pumps
First when I discovered that there are electrical pumps, I was like: Wow it will make inflating so much easier! And yes they do, but it comes with the cost of noise, a lot of noise.
I tried quite a lot of electrical pumps but all got the same problem. They were loud as hell. Even 12V Car Pumps or battery driven pumps.
A couple of months ago I found a way too make my pump somewhat silent, so I can blow up my inflateables at any time that I want without my neighbours sueing me out of the house.
First things first, we need too talk about how these electrical pump are build.
Mainly they got 3 parts: Intake -> Motor -> Exhaust. To make a pump silent you need too silence all 3 parts of the pump.
Lets start with what we need too make the pump silent:
The Pump that I use is from Amazon (ASIN: B09M8JXVH2). In normal operation its quiete loud you can hear it through the entire house.
One big advantage this pump has is, that you can connect a hose to the input and output of the pump and that is thermical protected (when it gets too hot it turns itself off until it cools down). Sadly we cant get the connectors for this pump seperatly so we need to buy this one 2 times, since its relativly cheap, its no big deal. (Hongyi got an similar pump, maybe someone can check if they sell the hose adapter seperatly)
Also since, we will burry the pump, we will need longer hoses. For my pump I bought 2m (inlet) and 6m (outlet) of hose (ASIN: B001Q8B202). The diameter isn't a perfect fit but still enough too fit the hose parts on.
Now the real deal is, we will undervolt the pump, to make the motor spin slower and so make less noise. For that we will use a Variac (ASIN: B07ZRN6T6K) (That's the one I use. It works fine but seems to be a little cheaply made, I replaced the cord with a longer one and planning on replacing the outlet against a better one).
To monitor the heat of the pump I recommend using at least 1 temperature sensor (ASIN: B07WZQSFCL). Its not needed since the pump is thermal protected but it's still recommended!
With that we can now build our super silent pump:
First things first, put some old clothing into a package (make it about half full) then cut 2 onto opposite sides. The holes will be our inlet and outlet so make them big enough too fit the hoses through!
If you bought a temperature sensor you should tape it onto the body of the pump.
Now put the pump inside and connect our selfmade hoses with the adapters onto it. In best case you want too tape the hoses onto the package so it wont come out. Make sure that the switch on the pump is set to On!
Put more clothing onto the pump until the box is entirely full! Make sure all the cables are on the outside of the box before you close it and tape it really good.
For a first test, you can connect the pump directly too the outlet don't let it run too long or the pump will overheat and shut off.
If everything works fine, you need too find a place where you can put the box with the pump to. For me the perfect place was under my bed, since there is much empty space and a big matress above it which will absorb much noise.
In best case, you can even put more clothes blankets and other stuff around the box so it gets even more silent.
Since we only want too use our outlet, you can let the inlet stay under the bed. But make sure its free and can suck air in! The Outlet you can move too your desired position and put the other adapter and nozzle on.
If the adapter doesn't fit, put some rounds of duck tape on the hose and then screw the adapter onto it.
Now you can simply connect your pump to your Triac and turn it on. It may happens that the Pump doesn't start too spin on voltages under 50 Volts. Thats entirely normal, just crank up the voltage for a moment and turn it right down. I can operate my pump up to 50V without getting noise issues.
Minimum is about 25V before the pump stops. (I recommend using 30V-40V so the motor doesn't get too hot)
Now you should have a perfect silent pump. You might not get the same output pressure as when you put the pump directly on 230V AC, but it should be enough too pump up balloons and big inflateables.
Let the pump have a break every once in a while so it doesn't overheat and destroy itself. It will definitly increase the life span of your pump. Also monitor the temperature by your thermal probe and the air that comes out of the hose.
Thats how I got my pump so silent, that you cant hear or barely hear it in the next room. And yes the amount of air is still quite good and it can pump up stuff very fast.
6. Deflation
When you are done with your session and you wanna make some room and put away your inflateables you need too deflate them.
If you got a inflateable without a safety valve or a removeable safety valve this is quite easy.
For Hongyi Toys you got a "Valve in Valve" thingy. The black thing allows air only too go into toys. You can take it out and uninflate it very easy.
For Inflateable World toys you are maybe not so lucky. Some inflateables got a simlar technique as Hongyi toys but most of them have a safety valve, which can be quite annoying to deflate.
For that case, you should remove the flap that keeps the air inside before inflating the toy. (I think this Videos showes it really good: https://www.youtube.com/watch?v=eQoV6w_nuSQ )
Now when you let all the air out it is recommended too suck the rest of the air out of the toy, so it doesnt take up as much space. For that you can use the Intex Double Quick III Pump mentioned earlier.
If you got a Hongyi Toy the valve is too big for the pump, but thats not a big problem. Just take one of the black valves and remove the little rubber flap (you can easy pull it out and put it back in later, or you order some extra from Hongyi).
Now put it into the champer you wanna deflate and connect it too your Intex pump and start the deflation process. After you are done you put in a original black one way valve with the rubber flap installed in and close it up as fast as you can. When you repeat that for all chambers all your toys will take up way less space.
7. Some random stuff I noticed
- I already mentioned these Black Hongyi one way valves. Some of them can be squeaky for some reason. If you put on some lotion on them they will stop squeaking.
- If a online shop only ships to the EU or Germany but you are not based here, you can get a german adress for free. Just use mailboxde.com
They will give you an adress where you can receive parcels at and they will forward it too you, wherever you life. It's free just the forwarding costs a little money extra.
Well that's it for now.
Sorry for this big wall of text
I just wanted too share all my inflating experience with you. If you got anything too add feel free too write an reply on this post or write me an DM.Thanks for reading
They are always sold out super quick
Comment