I have a question. Are electric pumps worth it? Do they get the balloons bigger, do they warm the air in the balloon and what ones would you recommend
Balloon pump
Collapse
X
-
GuestTags: None -
Re: Balloon pump
In my own experience; pumps are pre requisite for inflation of larger balloons. A Q24" for arguments sake would take forever to blow up by mouth and if you have many; all day. Heat is the enemy for pumps as they can overheat, specially the cheaper brands if used prolifically in a short span of time. Zibi branded pumps do a little better but cost a lot more. My advice buy a cheaper unit off of Amazon for around $15 (£12) and see how it goes. The warm air they produce from being used will not be as effective as simply inflating the balloons twice. -
Re: Balloon pump
If you like big loons and plenty of them then an electric pump is totally worth it, some can blow up big looms really fast, whereas blowing them up by mouth takes forever.
I have an electric pump myself but it's more for inflatables, it works really well for them but struggles with blowing up balloons, unless I have partly inflated them by mouth first, and it doesn't blow them up that fast.
So, I will eventually get myself a proper balloon pump.Comment
-
Re: Balloon pump
I have a smaller balloon pump that I got off Amazon for doing decorating with smaller (16" and under) balloons. Anything larger than 16" and it starts to get hot. It does ok with the larger shape balloons beings it's not going full speed the whole time. For large balloons (24" and up) I use an Intex quick fill pump. Works amazing. I also have a smaller 12v Intex pump that I use in my car.Comment
-
Guest
Re: Balloon pump
I have one of those silly pumps for airbeds but takes forever to pump anything 20 inches or above.Comment
-
Re: Balloon pump
But there is the scenario, that blowing up big balloons by mouth will keep the slave busy for some time, and with very little effort from the dom! (don't I know it!!)🎈📌💥 🐕 🐖Comment
-
Re: Balloon pump
Nah, they're still optional - the smallest balloons I have are Q24s and I basically never use a pump, I've blown up GL1200s and bigger dozens of times by mouth :PIn my own experience; pumps are pre requisite for inflation of larger balloons. A Q24" for arguments sake would take forever to blow up by mouth and if you have many; all day. Heat is the enemy for pumps as they can overheat, specially the cheaper brands if used prolifically in a short span of time. Zibi branded pumps do a little better but cost a lot more. My advice buy a cheaper unit off of Amazon for around $15 (£12) and see how it goes. The warm air they produce from being used will not be as effective as simply inflating the balloons twice.Comment
-
Re: Balloon pump
I completely agree with everybody here... as a fan of 24" and 36" balloons, it would take forever to blow up the dozen or so that I usually play with in a session, so some sort of inflator is a must. Usually I'll fill my space with 8-12 (tightly) inflated balloons, and then go to work blowing to pop. Even starting on a single "fresh" blow-to-pop, getting a 24" balloon up to capacity quickly matters to me. Sometimes I like to luxuriate in a slow blow to pop by mouth entirely and enjoy the process of bringing the balloon up to size; but most of the time, I want to skip the boring stuff and get it to the "too big and tight" stage as fast as possible, so then I can enjoy pushing it too-too-far myself. Let's get to that exciting and dangerous point quickly!
At work (my own shop, so I can use the space to play after hours when it's locked up any my employees are gone), I have the benefit of a commercial 80-gallon air compressor. Normally air compressors are all about high pressure (that we don't need for balloons) but can't produce high volume (which we do want, lots of cubic feet of air in a dozen 24" balloons). This means that you wait forever for your small compressor to pressurize, but can't inflate many balloons before it runs out of air and you have to wait once again. Any small home-gamer compressor has a low-volume, high-pressure pump that is bad for running high-volume air tools off of (like die grinders or sanders) and will be equally bad for large continuous inflation. Luckily, my shop commercial 80-gallon compressor has lots of capacity (both in the tank and also compressor pump volume) to continuously inflate as much as I want.
For home, I've tried small compressors (too loud and slow, see above), small air-mattress pumps (generally OK, but high-pitched-piercing-loud and also have trouble starting thick latex big balloons sometimes), but my favorite overall has been a simple and sturdy canister vacuum. I have an awesome old Electrolux canister vac (like, 80's vintage) that has both suck and blow functions. It's relatively quiet, made to run for constant minutes (think about vacuuming multiple rooms), and produces a huge amount of volume while also having the power to start large balloons with thick latex. It also does seem to warm the outlet air slightly, which (while not as good as a pre-inflation) does help everything get a little bigger. Only caveat is keeping it clean; I'll generally have an empty clean vacuum bag that I keep stashed with all of my balloons to keep the outlet air cleaner when I'm using the vac for "inflation" purposes, and also make sure to pre-clean the vacuum hose. It's been with me for years (and gone through hundreds if not thousands of balloons, mostly preinflating them for me, but many times blowing fully to burst), and is absolutely my favorite tool for the job. Plus, it'll never arouse suspicion out in the house. It's just a good vacuum!
I've always been interested in picking up one of the dog dryers mentioned above, since they seem to be a very similar setup to my vacuum, but a little more purpose-oriented. I have never done so yet, mainly because my stash (a couple of full duffel bags/totes of balloons, plus ear and eye protection, one-way valves, respirator to serve the same purpose, and some more *personal* gear) already takes up a decent amount of space, and adding some large-ish equipment to my fetish stash just starts to seem like a lot of time/space/money devoted to masturbatory practice! Still, I am a believer in "the right tool for the job"...Comment
-
Guest
Re: Balloon pump
Any review on premium mini cool aire inflator, are they noisy and how quick do they blow up a balloon.Comment
-
Re: Balloon pump
i have mini coole aire 2. itg is much noisier that a dog hairdryer (also more expensive). Dog hairdryer also has flowrate control know and ability to turn on heat which i find stops overinflated balloons from popping prematurely after tied (if the air is cool and you overinflate, when the air gets to room temp it expands popping your balloon.....unless that is what you want
Comment
-
Guest
Re: Balloon pump
Got a cool aire mini today but also got a stuffer, have no use for it what do I do with it? Are they're looners who like to stuff balloons or teddy's into bigger balloons?Comment
-
Re: Balloon pump
How loud are the dog hair dryers? Would like to get one, but only if they're quiet. I see they're advertised as being "quiet" but that definition can mean different things to different people. Don't want to spend $100+ on something that's as loud as a shop vac.
Are they quieter than a vacuum cleaner?Comment
Comment