Anyone use a one way valve to b2p or just blow a big balloon you can make bigger later? Any suggestions on what to buy or how to make one?
Valves
Collapse
X
-
Re: Valves
You can buy one way or non return valves for big balloons- I’ve a couple I purchased from Balloons United but I’ve found them to be a little leaky. You can screw in a little cap to seal them off though. If your good a making things though just buy a couple of replacement inflatable dinghy screw in Boston Valves. These seal much better and all you need to do is glue or bond one of these into a short length of rigid tube to attach the balloons neck to wrapping an elastic band around it to seal the balloon if it’s loose. -
Re: Valves
For smaller balloons these ones don't leak like the ones from Balloons United:
Comment
-
Re: Valves
I also have the 3/4" one of these, which seals really well, so have been considering getting a larger one for huge balloons since the standard blue and white one with the yellow cap doesn't seal very well either.
Comment
-
Re: Valves
There was a how to a while back about making a one way valve with a film canister, if I can find it I'll post it here.Comment
-
Re: Valves
I made a perfect one way valve from a soap dispenser. It even had a ring to fit the balloon on to.Attached FilesHow big will it go? Only one way to find out...
My website: loonerstories.weebly.comComment
-
Re: Valves
I didn’t have to do much. It literally came out the soap dispenser like that. The black tape is covering a small hole on the side. All dispensers are a bit different though, some work better than others. This one just happened to have a ring of the right size to fit 11-14 inch balloons.How big will it go? Only one way to find out...
My website: loonerstories.weebly.comComment
-
Re: Valves
I just got some of those coloured valves posted earlier. They don't seem to leak like I've heard some do, which is nice. I rigged one up at the end of a hose to do some b2ps from another room (since I'm a weenie) and they did the job, though it was a lot tougher than I was expecting – I guess because the hose was narrow?
They seem like they'll fit most 12-14" balloons pretty well. It was great being able to grab an already-inflated balloon and put a couple more breaths into it.Comment
-
Guest
Re: Valves
Loonerworld is also selling One Way valves. I tested them today and wasn't dissapointed. The valve also fits on smaller balloons but it takes a little bit of work to put it on.
Comment
Comment