"Real" blow to pops

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #16
    I have struggled with B2P for years. I finally seem to have turned a corner and started to enjoy it, but its early days and I have regressed back into fear of them before.

    This might be a different perspective to most, but for me it's its all about challenging myself and the intention behind the act. Simply put; if I decide to try to blow up a specific balloon until it bursts, and it pops during the inflation process I count that as a success. If it goes off prematurely due to a defect, or while I am pausing for breath, admiring it etc that still counts as long as my intention was to keep going.

    What has often happened in the past is that the fear kicks in and I have made a conscious decision that I can't do it. I have held the overflated balloons out at arms length and tried to summon up the courage to continue and then it's gone off. That doesn't count because I know that I had crossed that point and wouldn't have done it. If however I pause for a second to psyche myself up and thats the point of the bang thats fine. You know when you've crossed that line and chickened out.

    Comment

    • phenix
      Senior Member
      • Jan 2021
      • 349

      #17
      Originally posted by marvin19
      With some luck, these balloons are very durable and resistant - both Belbal and Tuftex 24 are fantastic brands - and provide some serious backpressure. Therefore in a real b2p, after it took me some minutes already to blow that balloon very tight, I must stay focused to really force now one huge blow after another into that tight neck, just to make sure that each breath really stretches that enormous balloon even further beyond its capacity. In extreme cases for a BB24 - the cases which I like most - you can hear the latex crack in the end like a very taut rope, and the blowing sound changes into a deep and hollow resonant "whoomp, whoomp", signaling that the balloon has reached its last capacity reserve. Then I know that this balloon will not burst from some weak spot, but its whole body will explode into tiny shreds after about half a dozen blows more. Thats just my kind of "real b2p" experience that I really love. In my opinion, the larger balloons offer that experience exceptionally well
      Wow, love these small "clouds" during b2p 💨
      It looks fantastic! 😍
      How did you achieve this?

      Comment

      • marvin19
        Member
        • May 2026
        • 51

        #18
        Originally posted by phenix
        Wow, love these small "clouds" during b2p 💨
        It looks fantastic! 😍
        How did you achieve this?
        I guess you mean that clouds of moisture, from inside the balloon - mixed with tiny shreds from its explosion. A lot of moisture forms because these large balloons grow massively and thus require a huge amount of air before bursting, and I blow them all up using lung power only. It especially happens in cold or wet weather conditions. I filmed most of these shots in late autumn or late winter.

        I have a vast archive of vids from my past b2p sessions and I'm always amazed when I look through them afterwards and find such rare balloon blowing impressions that I really love. There are no post-effects or staged situations involved, only random shots, using an old and easy-to-use camera (Sony HDR-CX320). Any staging or posing or optimization with expensive video recording equipment would ruin the fun for me: I like the raw and authentic random impressions. When I have some time, I only need to grab my small camera (as well as some 20€ tripod), and a bag full of large balloons and go somewhere in the woods to take a deep breath and blow them up until the shreds fly.

        Regarding moisture clouds and flying shreds there is a lot of amazement that can happen during a b2p session. Find here some larger version of one image as well as two other absolutely stunning views.
        ral-btp-TT24-cr-burgundy.jpg real-btp-BB24-soap-green.jpg real-btp-BB24-cr-blue.jpg
        Bye, Marvin

        Comment

        • phenix
          Senior Member
          • Jan 2021
          • 349

          #19
          Marvin, thanks a lot! It looks awesome 🥰

          Comment

          • Platonic_Lnr
            Senior Member
            • Mar 2025
            • 308

            #20
            Originally posted by marvin19
            Hi, I'm into b2p of 24" balloons a lot. After blowing hundreds of Belbal 24" and Tuftex 24" to bursting, I'm still amazed by their b2p qualities, and it never gets boring . First of all, for me its a real b2p when a balloon was already very tight before bursting and did not pop prematurely. I should state that I blow those balloons fresh or prestretched once only, and force them with determination to bursting, so you can easily notice when a balloon bursts too early with a snapping sound into one or very few soft shreds. In a real b2p of a 24", the neck has already stretched out fully, so that only the ring of the mouthpiece is left and I must press it with thumb and index finger of both hands against my lips and cheeks (their mouthpiece is rather large). With some luck, these balloons are very durable and resistant - both Belbal and Tuftex 24 are fantastic brands - and provide some serious backpressure. Therefore in a real b2p, after it took me some minutes already to blow that balloon very tight, I must stay focused to really force now one huge blow after another into that tight neck, just to make sure that each breath really stretches that enormous balloon even further beyond its capacity. In extreme cases for a BB24 - the cases which I like most - you can hear the latex crack in the end like a very taut rope, and the blowing sound changes into a deep and hollow resonant "whoomp, whoomp", signaling that the balloon has reached its last capacity reserve. Then I know that this balloon will not burst from some weak spot, but its whole body will explode into tiny shreds after about half a dozen blows more. Thats just my kind of "real b2p" experience that I really love. In my opinion, the larger balloons offer that experience exceptionally well - but I don't want to argue against Belbal or Everts 14" or smaller balloons at all.
            And BTW: its always great fun when a balloon bursts exactly in that moment when I'm blowing into it: see photos
            SlowMo-Limits-BigBalloons.jpg
            Bye Marvin
            Are all of those pictures of BB24's aside from the top one? That looks like a crystal yellow TT24", one of which I pumped to pop once. It got well over 30", and when it popped, it actually caused a Globos Payaso 24" that was right next to it to pop, too. In fact, how would you say a TT24" "feels" when it's about to pop compared to a BB24"?

            Also, just how many inches will a BB24" or TT24" be when they reach the characteristics you're describing? Compared to the size of a TT24" when uninflated, I'd think a BB24" should be able to get much bigger. I'm almost certain I got one to 31" once, but it popped right as I was measuring it, and in no way did it "feel" like how you described.

            As an aside, do 36" BB and TT give similar "feedback" when trying to B2P them? I've had several Tuftex 36" spontaneously pop once they got close to their rated size, and they never got "harder" to blow up, and I once got a BB36" to 40" (but eventually popped it manually), and it didn't get harder, either.

            Comment

            • marvin19
              Member
              • May 2026
              • 51

              #21
              Originally posted by Platonic_Lnr
              Are all of those pictures of BB24's aside from the top one? That looks like a crystal yellow TT24", one of which I pumped to pop once. It got well over 30", and when it popped, it actually caused a Globos Payaso 24" that was right next to it to pop, too. ...
              Hi Platonic_Lnr, so many questions that I don't know where to begin. We could fill a whole "24 inch b2p Q&A" thread with all the answers. Ok, let me start with this one: the three balloons are a crystal yellow BB24, crystal green BB24 and a burgundy Tuftex 24". The top one got not so big, so it can easily be mistaken for a TT24 because of its size and this special shape it had. But was not bad at all. The burgundy TT24 was one of these extreme examples of a rather well-aged TT24 where you can blow endlessly into that huge lightbulb with your whole body weight and you cannot believe it. But you can also see that even the largest TT24 will not achieve the size of an overblown BB24. And if you think that those BB24 are big already, just look at this one. A BB24 crystal blue - my all-time favourite so far - took me at least one minute more after this pic of an 11-12 minutes long blowing marathon to finally burst it. You should know that none of them was prestretched at all and blown to pop in one run under outdoor conditions - so there is large potential for all the extreme-stretching experts here.
              BB24-cr-blue-huge-B2P.jpg
              To be continued, regarding all your other interesting questions...

              Bye, Marvin

              Comment

              • marvin19
                Member
                • May 2026
                • 51

                #22
                Originally posted by Platonic_Lnr
                ... In fact, how would you say a TT24" "feels" when it's about to pop compared to a BB24"? ...
                Oh man, when we speak about balloons that are extremely overstretched before popping and will not pop prematurely: both feel absolute fantastic, as most of you may already know! You feel the tightness of an extremely overstretched TT24 at its neck and smaller mouthpiece ring, which gets so tight that it often hurts my lips (for overinflation I press the ring of the mouthpiece on my lips like a tuba mouthpiece, probably there are better techniques). Often enough I'm not able to blow more than 4 TT24 of that kind to bursting in a session because my teeths have scrubbed the inner lip skin somewhat.
                You know that the latex of the TT24 feels thinner but absolutely elastic until their absolute limit. TT24 have that typical "aged crystal burgundy experience": the latex may feel thin from aging or prestretching, and you fear some early pop, but surprisingly they expand huge and even with some not too bad backpressure. I had some TT24 that simply did not want to stretch anymore in the end, just as if the latex had some firm limit, pressed against the mouthpiece ring like hell, and I had to blow with all my might into them to actually burst them.
                With a BB24, youl feel the tightness more at its backpressure which is somehow more evenly distributed over the whole volume and blowing time. Or in other words: you definitely get the feeling that you blow into really thick latex. Which is at the same time very elastic, not like some other large balloons beyond 24" which feel thick and durable but are actually simply brittle and snap unexpectedly. Not so with the BB24: early pops are rare (but beware the soap colours, these are the more brittle ones for whatever reason). The backpressure of a BB24 feels higher in my opinion just because you must blow against it for a much longer time. I guess that BB24 requires 60%-100% more blows to bursting than the TT24. Sorry that I'm unable to measure them in inches outdoors. This mix of sheer volume, thickness, backpressure and stretching ability - at least during first inflation - makes the BB24 my absolute b2p favourite. Some BB24 crystal colors (blue, purple) expand so much that you force blow after blow into that absolutely overstretched balloon endlessly and it even stretches more, but not with that hard lip-biting feeling of a TT24, but instead requiring that you force even more mighty blows into it. They also offer that absolute thrilling experience that immediately before bursting the pressure drops a little, the enormous balloon stretches even more, the blowing sound turns into a more hollow "whooomp" and the loons body resonates a bit. Then you know, that - after a few more huge blows - this massive lighbulb is absolutely about to burst into tiny pieces.
                Find two pictures here that hopefully convey that feeling somehow: the "crisp lip-biting b2p experience" (TT24 in cr blue, one blow before bursting, I mean: look at that TT24-typical massive balloon body for a 24") vs. the "sheer volume blowing experience" (a BB24 in cr pink is bursting while I'm about to force a huge blow into it, its capacity is beyond any means for a 24").
                lip-biting-b2p-tt24-cr-blue.jpg bb24-cr-pink-volume-blowing-b2p.jpg
                So much about blowing them to burst. I never use a pump or measuring device, so I must leave it to the prestretching experts to share some knowledge about multi-inflation stability and absolute sizes in inch. But clearly the BB24 has some limits here: the neck won't stretch that much after some inflations, the backpressure drops and you do not know when its about to go. The TT24 is known for its surprising expansion ability after prestretching (but yeah, not always). In my opinion, the BB24 cannot match that. I like to blow them to bursting at their first inflation, when they are nicely firm.

                Bye, Marvin

                Comment

                • Platonic_Lnr
                  Senior Member
                  • Mar 2025
                  • 308

                  #23
                  Originally posted by marvin19

                  Oh man, when we speak about balloons that are extremely overstretched before popping and will not pop prematurely: both feel absolute fantastic, as most of you may already know! You feel the tightness of an extremely overstretched TT24 at its neck and smaller mouthpiece ring, which gets so tight that it often hurts my lips (for overinflation I press the ring of the mouthpiece on my lips like a tuba mouthpiece, probably there are better techniques). Often enough I'm not able to blow more than 4 TT24 of that kind to bursting in a session because my teeths have scrubbed the inner lip skin somewhat.
                  You know that the latex of the TT24 feels thinner but absolutely elastic until their absolute limit. TT24 have that typical "aged crystal burgundy experience": the latex may feel thin from aging or prestretching, and you fear some early pop, but surprisingly they expand huge and even with some not too bad backpressure. I had some TT24 that simply did not want to stretch anymore in the end, just as if the latex had some firm limit, pressed against the mouthpiece ring like hell, and I had to blow with all my might into them to actually burst them.
                  With a BB24, youl feel the tightness more at its backpressure which is somehow more evenly distributed over the whole volume and blowing time. Or in other words: you definitely get the feeling that you blow into really thick latex. Which is at the same time very elastic, not like some other large balloons beyond 24" which feel thick and durable but are actually simply brittle and snap unexpectedly. Not so with the BB24: early pops are rare (but beware the soap colours, these are the more brittle ones for whatever reason). The backpressure of a BB24 feels higher in my opinion just because you must blow against it for a much longer time. I guess that BB24 requires 60%-100% more blows to bursting than the TT24. Sorry that I'm unable to measure them in inches outdoors. This mix of sheer volume, thickness, backpressure and stretching ability - at least during first inflation - makes the BB24 my absolute b2p favourite. Some BB24 crystal colors (blue, purple) expand so much that you force blow after blow into that absolutely overstretched balloon endlessly and it even stretches more, but not with that hard lip-biting feeling of a TT24, but instead requiring that you force even more mighty blows into it. They also offer that absolute thrilling experience that immediately before bursting the pressure drops a little, the enormous balloon stretches even more, the blowing sound turns into a more hollow "whooomp" and the loons body resonates a bit. Then you know, that - after a few more huge blows - this massive lighbulb is absolutely about to burst into tiny pieces.
                  Find two pictures here that hopefully convey that feeling somehow: the "crisp lip-biting b2p experience" (TT24 in cr blue, one blow before bursting, I mean: look at that TT24-typical massive balloon body for a 24") vs. the "sheer volume blowing experience" (a BB24 in cr pink is bursting while I'm about to force a huge blow into it, its capacity is beyond any means for a 24").
                  lip-biting-b2p-tt24-cr-blue.jpg bb24-cr-pink-volume-blowing-b2p.jpg
                  So much about blowing them to burst. I never use a pump or measuring device, so I must leave it to the prestretching experts to share some knowledge about multi-inflation stability and absolute sizes in inch. But clearly the BB24 has some limits here: the neck won't stretch that much after some inflations, the backpressure drops and you do not know when its about to go. The TT24 is known for its surprising expansion ability after prestretching (but yeah, not always). In my opinion, the BB24 cannot match that. I like to blow them to bursting at their first inflation, when they are nicely firm.

                  Bye, Marvin

                  Those look like they're all at least 30" if not 36", so they are indeed pushed crazy far. In fact I've seen a lot of b2p videos of both TT24"s and BB24"s, and I've never seen any get that big. But most of the b2p videos I see are people taking their time, so I wonder if you blow very fast and forcefully a balloon won't have a chance for any imperfection to give way as it would if you stopped.

                  I'll say I was pop phobic my whole life (as in I had to watch videos of balloons popping with the sound off, and much less could I stand them in person) until a year ago when I set out to get over my fear, and after a week I could pop any balloon of any size (but I prefer wearing hearing protection for balloons over 12"), and my obsession with balloons was unleashed (but interestingly I lost any sort of fetish for them, but that's another story). Over the past year I've collected hundreds of balloons from all different brands, and I always like slightly overinflating them (mostly by pre-inflating their neck, which by doing so you can get MASSIVE necks on some colors of TT24"'s). And while I had b2ped a few 12"s and a Walmart 17" (which interestingly never got "harder" to blow up despite getting to like 24") purposely, I didn't really "like" doing it because I liked to admire the balloons for awhile.

                  However, while accidental pops didn't scare me for the first few months (they were actually more of a "relief" since the tension was gone), a few months later my fear of unexpected pops suddenly came back, so while my obsession with balloons has continued, I can't approach them as "casually" as I could a year ago, and now I have to really be in the mood to do anything with them.

                  But I'll say now it's come to the point I actually really, really do want to b2p balloons (especially 36"s) because I love the idea of a balloon reaching its max size, however not knowing when the pop will come still scares me (as does the chance the latex may "snap" me), which is preventing me from doing so. In fact inflating balloons to just their "rated" size has gotten boring because I want to see how big they can get, but that fear is holding me back. But if it wasn't, lol my balloon collection would be gone in just a few days. And I'll say your definition of a b2p describes what I think one is perfectly in that the balloon pops because it literally cannot take more air. Also yes I never use a pump and I never inflate a balloon multiple times. But I have never felt a 24" or even a 36" "feel" the way you've described even when I've overinflated them or had a spontaneous pop, so for a long time I wondered if you could ever even feel a balloon that big even begin to feel harder to blow up.

                  Comment

                  • Platonic_Lnr
                    Senior Member
                    • Mar 2025
                    • 308

                    #24
                    Originally posted by marvin19

                    Hi Platonic_Lnr, so many questions that I don't know where to begin. We could fill a whole "24 inch b2p Q&A" thread with all the answers. Ok, let me start with this one: the three balloons are a crystal yellow BB24, crystal green BB24 and a burgundy Tuftex 24". The top one got not so big, so it can easily be mistaken for a TT24 because of its size and this special shape it had. But was not bad at all. The burgundy TT24 was one of these extreme examples of a rather well-aged TT24 where you can blow endlessly into that huge lightbulb with your whole body weight and you cannot believe it. But you can also see that even the largest TT24 will not achieve the size of an overblown BB24. And if you think that those BB24 are big already, just look at this one. A BB24 crystal blue - my all-time favourite so far - took me at least one minute more after this pic of an 11-12 minutes long blowing marathon to finally burst it. You should know that none of them was prestretched at all and blown to pop in one run under outdoor conditions - so there is large potential for all the extreme-stretching experts here.
                    BB24-cr-blue-huge-B2P.jpg
                    To be continued, regarding all your other interesting questions...

                    Bye, Marvin

                    Did it really take you 12 minutes to b2p that Crystal blue TT24"? I've never gotten a straight answer from anyone here if these times are good, but I feel like I can inflate balloons to their rated size pretty fast; I can do a 17"-19" balloon in less than a minute, a 24" in less than 2 minutes, and a 36" in about 7 minutes. In fact, I got a soap orange BB36" to 34" inches in 4 and a half minutes, but because I was a little spooked by a crystal magenta TT36" spontaneously popping after I got it to 34" just moments before, I stopped at that size.

                    Based on your experience, about how long would I have to keep going for each size of balloon to get it to the point you got those TT24's and BB24's?

                    Comment

                    • marvin19
                      Member
                      • May 2026
                      • 51

                      #25
                      Originally posted by Platonic_Lnr


                      Those look like they're all at least 30" if not 36", so they are indeed pushed crazy far. In fact I've seen a lot of b2p videos of both TT24"s and BB24"s, and I've never seen any get that big. But most of the b2p videos I see are people taking their time, so I wonder if you blow very fast and forcefully a balloon won't have a chance for any imperfection to give way as it would if you stopped...

                      ... I wondered if you could ever even feel a balloon that big even begin to feel harder to blow up.
                      I'm not into measurement anymore but shared your experience many years ago. I used to carefully blow some large ballons past their rated size at home and measure them. The best I could get out of a TT24 was about 70-72/85-89cm (Diameter/Long side with neck), and the normal BB24 went definitely to 75/85, even when I was fearful of popping at that time (in fact, none of these did ever pop). But that was not so much compared to what I experience with a determined B2P today, especially with those BB24. I mean, some TT24 of this size will not take more than 10-25 blows beyond that, but for a BB24, the real blowing fun begins for me at this point. So one can safely say that the best of the BB24 in my pictures reached about 85-88/95-100 (that would be about 32-34"/36-39") but I don't really know. Extreme stretching experts can do much better, but outdoors?

                      Yes, a balloon 24" - 36" also feels harder to blow into after it has been blown past its rated size. At least for me, but I don't know to what degree this is a psychological phenomenon. When you blow up a large balloon to bursting, there is always some exhaustion, at least for me - I'm small with few muscle mass, so I'm much more into this - and it gets more and more intense when that light bulb in front of you grows enormously and gets even firmer. The BB24 are absolute bombshells for about 3-4 minutes before they explode and that may be scary for some, so it feels harder. You should also take experience and muscle stamina into account. Some years ago, when I started that BB24 B2P adventure, I was absolutely unable to burst some of them, especially around winter, when the latex is even firmer in the cold. Despite blowing with all my might, I had to surrender and ended up with holding some semi-transparent bombshell in my hands that reached down to my feet (remember, I'm an about 175 cm dwarf) and was hard as concrete. It was unbelievable. Nowadays I don't have difficulties at all to overcome that maximum backpressure in the end, same for the BB36.

                      We should ask the measurement experts here to provide some inflation videos with a pressure gauge. I can remember many years ago there was a nice ytb channel of some kind japanese guy ("hiro..." oh, if I only could remember) who pumped to pop some really beautiful TT17, Q24 and others with some pressure and volume live recording. There was a crystal blue BB24 that provided a linear pressure increase and beat enormous TT17s by far in maximum pressure. That was absolutely impressive just from watching it, inspired me a lot to try that, and in a real life B2P the BB24 do not disappoint but you can feel the same.
                      I miss such awesome and well-done footage nowadays (thank you, hiro<Unknown>!). This would tell you a lot what you want to know.

                      From my side I'm not interested in measuring anymore, I simply want to blow huge balloons until they explode, feel the great B2P sensation that they provide, and capture some impressive shots of this endeavour.
                      Bye, Marvin

                      Comment

                      • marvin19
                        Member
                        • May 2026
                        • 51

                        #26
                        Originally posted by Platonic_Lnr


                        Did it really take you 12 minutes to b2p that Crystal blue TT24"? I've never gotten a straight answer from anyone here if these times are good, but I feel like I can inflate balloons to their rated size pretty fast; I can do a 17"-19" balloon in less than a minute, a 24" in less than 2 minutes, and a 36" in about 7 minutes. In fact, I got a soap orange BB36" to 34" inches in 4 and a half minutes, but because I was a little spooked by a crystal magenta TT36" spontaneously popping after I got it to 34" just moments before, I stopped at that size.

                        Based on your experience, about how long would I have to keep going for each size of balloon to get it to the point you got those TT24's and BB24's?
                        Then you are pretty fast, I guess. Actually I'm only about 175cm of size with under average lung volume. You cannot train that. So, I guess that about 80% of the people in this forum would be much faster than me, and I would never win a B2P race, thats for sure. I need about 4:30 to 6:30 to blow an average TT24 to bursting, even when I hurry up a bit. But I'm sure that someone taller could do it in a B2P race in 3:30-4:00. And if your lung volume exceeds mine about 40-60% then you should need e.g. about 6:00-7:00
                        where I need 8:30-09:30 for a BB24. Would fit roughly the time you mentioned that you require to blow a balloon to its rated size. Your times look very crazy for me being a dwarf, but you need to find out for yourself how long it takes you beyond that (I mean ... rated size... rated size! Ha, haha, hahahaaa, muuuhaahaaahaaaa - sorry for my joke). I do not hurry because I like to put the balloon down two or three times during blowing, so that it can relax and stretch a little and I can have a nice look on it and feel impressed by that huge lightbulb, just as every balloon enthusiast would do. But towards the end, I blow faster and try to force some huge blows into it, because the backpressure is higher and I want to maximize the chance that it bursts just exactly when I'm blowing into it, and not in my hand. I did not check it, but I would estimate the "netto time" for that crystal blue BB24 (not TT24!!!) monster actually to 10:30-11:30. It took me about 400 blows to burst it (a BB36 takes me about 500 blows) and I never experienced a BB24 like this before.

                        I never measure times because i'm not interested in a "good" time. So you don't need to ask me specifically about this or about some comparison run. I won't do that, because comparison, competition and expectations ruin the fun for me. I simply wan't to be impressed by those huge balloons and feel some nice B2P sensations.

                        Comment

                        • stretchedtight
                          Senior Member
                          • Apr 2013
                          • 275

                          #27
                          Really enjoyed reading these posts marvin19. I've never blow to pop a 24" balloon, I like the 14-18" balloons most and I'm still working through my fear/phobia. So I will blow more and more and too often pop it with a knife while I'm inflating it (getting myself used to them popping in my face and in my mouth too). The tuftex balloons in particular just seem to go on forever, especially older balloons. Like you said they either pop prematurely or go on forever. I have even been keeping tabs on the date codes to get a better idea where the sweet spot is. I've put some on the pump and stopped when they 21" and could keep going. I will keep pushing them and listening and feeling for those hints when they are close.

                          We should ask the measurement experts here to provide some inflation videos with a pressure gauge. I can remember many years ago there was a nice ytb channel of some kind japanese guy ("hiro..." oh, if I only could remember) who pumped to pop some really beautiful TT17, Q24 and others with some pressure and volume live recording. There was a crystal blue BB24 that provided a linear pressure increase and beat enormous TT17s by far in maximum pressure. That was absolutely impressive just from watching it, inspired me a lot to try that, and in a real life B2P the BB24 do not disappoint but you can feel the same.
                          I miss such awesome and well-done footage nowadays (thank you, hiro<Unknown>!). This would tell you a lot what you want to know.
                          Would love to see this - I'm that phase where I'm obsessed/curious about the size/volume/pressure. If anyone knows where to find these videos please link/share. Thanks!
                          Last edited by stretchedtight; 27-05-2026, 04:48.

                          Comment

                          • marvin19
                            Member
                            • May 2026
                            • 51

                            #28
                            Originally posted by Platonic_Lnr
                            ... As an aside, do 36" BB and TT give similar "feedback" when trying to B2P them? I've had several Tuftex 36" spontaneously pop once they got close to their rated size, and they never got "harder" to blow up, and I once got a BB36" to 40" (but eventually popped it manually), and it didn't get harder, either...
                            For me, TT36 and BB36 feel differently in a B2P. But its nice how they resemble the qualities of their smaller brothers. The TT36 remains very soft without too much back pressure, but often pops early, especially when it is already aged. But I got some of them absolutely huge. They are in general not smaller than the BB36 counterpart. The BB36 has this thick latex that feels much more durable than a TT36, and premature bursts are rare. I also like that its shape is not completely round but more similar of 24", and forms a nice neck. In the end, when a durable BB36 has reached its absolute capacity limit, the whole body of this huge balloon begins to resonate and spring lightly back against the mouthpiece, because of its weight and enormous size. It gives that ultimate feeling of holding an tightly wound spring right in front of your face, that is really resistant and willing to expand further beyond its maximum capacity, if you have the stamina to blow it even more against the backpressure (which is not very high, but its definitely there). Then I know that if I force some more huge breaths into it for one or two minutes longer and make sure to really stretch it further with each blow, then I will be rewarded with a satisfying explosion. Thats what I absolutely love when I blow a BB36 to bursting and what I sometimes miss in other 36" balloons, which often feel softer, so that you don't really know when they are ready to explode.

                            Find some pictures here of an average-size burgundy TT36, a crystal red TT36 that got really huge and was (just like the TT24) very difficult to hold at the neck. Compare it to the usual B2P experience of a BB36 in soap red, crystal blue (which got scary huge, but unfortunately I had to film it on a rainy day in a dark forest - bad day for really great photo impressions ), and crystal transparent. Each photo was taken short before bursting. Thats the kind of B2P experience I really love
                            B2P-tuftex36-cr-burgundy-100.jpg B2P-tuftex36-cr-red-070.jpg B2P-belbal36-soap-red-099.jpg B2P-belbal36-cr-blue-098.jpg B2P-belbal36-cr-clear-124.jpg
                            Bye, Marvin

                            Comment

                            • Nopops4me
                              Senior Member
                              • Jun 2015
                              • 976

                              #29
                              Marvin, Are the 'thumbnail' pictures above from video clips??

                              Comment

                              • phenix
                                Senior Member
                                • Jan 2021
                                • 349

                                #30
                                Wooow, I love the these wet paths inside the soap crystal pink and clear loons 😍

                                Comment

                                Working...