Necking huge loons

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    Necking huge loons

    Hello Fellow looners,

    Have you ever tried to neck very huge balloons?

    36 inch or bigger
  • Hellus
    Tough Blower
    • Mar 2025
    • 182

    #2
    Originally posted by DanishLooner88
    Hello Fellow looners,

    Have you ever tried to neck very huge balloons?

    36 inch or bigger
    What a lovely picture! I blew up a round 36" that started bulging out a neck, but not as good as this before it turned into shreds.

    Comment

    • lucid
      Senior Member
      • Sep 2016
      • 1174

      #3
      I dont have much experience with balloons rated at 36 inches or bigger. Until fairly recently the biggest balloon I'm skilled at necking is the tuftex 24. I've noticed both cattex and belbal 24's get WAY bigger than that. They've got to be at least 36 inches. Yet, I've never really gotten a decent neck to pop out. Is it not possible or is it just me? I've never btp'd one so I'm not really sure if I've pushed them far enough to neck out properly. But I do know they were f'n huge!

      Comment

      • Guest

        #4
        Originally posted by lucid
        I dont have much experience with balloons rated at 36 inches or bigger. Until fairly recently the biggest balloon I'm skilled at necking is the tuftex 24. I've noticed both cattex and belbal 24's get WAY bigger than that. They've got to be at least 36 inches. Yet, I've never really gotten a decent neck to pop out. Is it not possible or is it just me? I've never btp'd one so I'm not really sure if I've pushed them far enough to neck out properly. But I do know they were f'n huge!
        Do you preinflate the necks 2-3 times before you put air in the rest of the balloon?
        The neck often needs to be stretched before and while inflating.
        Belbal 24´s get very big necks if you stretch or inflate 2-3 times while letting air out.

        Comment

        • lucid
          Senior Member
          • Sep 2016
          • 1174

          #5
          Originally posted by DanishLooner88

          Do you preinflate the necks 2-3 times before you put air in the rest of the balloon?
          The neck often needs to be stretched before and while inflating.
          Belbal 24´s get very big necks if you stretch or inflate 2-3 times while letting air out.
          Hey thanks for the reply!

          Yes I usually fill the balloon up maybe a quarter of the way and then squeeze all the air into the neck, causing it to inflate very tight. I usually do this several times but the best final product I've gotten could technically be considered a neck, but it's more of a stump lol.

          When you say "very big" do you mean like a foot or what? Just hearing that it's possible to get a good neck on them makes me want to try again so bad lol. They probably are my new favorite 24 inch balloon, more so after hearing that.

          Comment

          • LoonerHoax
            Senior Member
            • May 2020
            • 521

            #6
            I've gotten pretty good necks (6-12") on both Sempertex and Tuftex 36" balloons. I've done the sock method as well as fully inflating and sitting on them. I've gotten a couple of Q36 to neck in the past, but it was a struggle. Necking the giant Cattex figure balloons (through careful overinflation) is a lot of fun too.

            Comment

            • Kitten
              Senior Member
              • Jul 2023
              • 548

              #7
              I got a neck on a GL1200 before when I blew it until it burst. Took ages, but it was fun.

              Comment

              • Guest

                #8
                Originally posted by Kitten
                I got a neck on a GL1200 before when I blew it until it burst. Took ages, but it was fun.
                I bet that must have taken a good hour to B2p it, very impressive though!!

                Comment

                • BalloondudeEU98
                  Member
                  • Jul 2024
                  • 78

                  #9
                  Originally posted by Kitten
                  I got a neck on a GL1200 before when I blew it until it burst. Took ages, but it was fun.
                  How was b2p'ing a GL1200? I blow them up to rated size, but am scared to death to go beyond that haha

                  Comment

                  • UKPOPPER
                    Senior Member
                    • Feb 2023
                    • 492

                    #10
                    Tried necking an 18" today but this is as far as I got...it popped a few seconds later. Fun while it lasted.
                    Attached Files
                    Just one more puff...🎈

                    Comment

                    • Kitten
                      Senior Member
                      • Jul 2023
                      • 548

                      #11
                      Originally posted by Geoloon02

                      I bet that must have taken a good hour to B2p it, very impressive though!!
                      I didn't do it in one go. Even so, I had to pace myself.

                      Comment

                      • Kitten
                        Senior Member
                        • Jul 2023
                        • 548

                        #12
                        Originally posted by BalloondudeEU98

                        How was b2p'ing a GL1200? I blow them up to rated size, but am scared to death to go beyond that haha
                        It was quite fun other than my hand cramping from holding it. Had to have lots of breaks. Wasn't as loud as expected either.

                        Comment

                        • lucid
                          Senior Member
                          • Sep 2016
                          • 1174

                          #13
                          So after hearing about the great necks you can get on belbal 24's, I had at it again this morning when I had a few minutes before going to work. I was determined to either pull a huge neck out of this thing or pop it trying.

                          What actually happened was i inflated the neck 5-6x and did one full pre inflation. Then I screamed in terror when i saw how big the balloon had gotten without necking OR popping. I quickly cut the pump off and stared at it in disbelief, fully expecting it to pop at any second. I swear this thing had to hit 40 inches! I placed it on the couch and carefully lowered my bodyweight onto it while pulling at the mouthpiece. I was pretty happy to finally see that I finally necked one officially. Although I wouldn't call it a great neck. I could tell by looking at i could have done better with more time and effort. I was curious to see if it would hold at this size so I half knotted it and ran out of the room as I tossed it in the air. At the time, it felt like it would destroy the entire room with me in it, if it popped. It's probably the most intimidated I've ever been by a balloon lol. Im very curious to see if it will still be there when I get home from work.

                          Comment

                          • Guest

                            #14
                            Originally posted by Kitten
                            I got a neck on a GL1200 before when I blew it until it burst. Took ages, but it was fun.
                            Like this?

                            Please tell me if there is nudity restrictions, then i will photoshop the woman away, but thats a gl1200 with a good neck
                            Attached Files

                            Comment

                            • Guest

                              #15
                              Originally posted by lucid

                              Hey thanks for the reply!

                              Yes I usually fill the balloon up maybe a quarter of the way and then squeeze all the air into the neck, causing it to inflate very tight. I usually do this several times but the best final product I've gotten could technically be considered a neck, but it's more of a stump lol.

                              When you say "very big" do you mean like a foot or what? Just hearing that it's possible to get a good neck on them makes me want to try again so bad lol. They probably are my new favorite 24 inch balloon, more so after hearing that.
                              To be honest, a belbal 24 if overinflated hard (clear one) it might go 36 inch and have amazing neck

                              Comment

                              Working...