I know nothing about balloons

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • heaviest
    Senior Member
    • Jun 2018
    • 914

    I know nothing about balloons

    But this is hot:



    What should I know about this balloon:

    How big is it?
    I take it that because it doesn't have a neck, it isn't very fully inflated, or are some balloons very fully inflated round?
    Would a 250 pound woman be able to sit on this, with minor bouncing, and expect it to last a while?

    How big a balloon would a 250 pound woman need, to see some neck, and have some chance of popping from minor bouncing, but also a large chance it will survive the session?
  • Thinskinned
    Look Out!
    • Jul 2024
    • 247

    #2
    A lot of it depends on the surface that you're bouncing on. I'm not a bouncer/rider myself really but I have on occasion; I weigh around 275 lb and if I very slightly neck a Belbal 14" I can put it on a mattress or sofa and sit normally on it and it won't pop, I can even bounce a little. If I bounce on it hard, it will pop quickly. Quality of balloon will play a large role in how durable it is under load.

    The balloon in the video is underinflated a bit, those are Qualatex 36" balloons, and that one doesn't look like it's anywhere near 36". I don't have a ton of experience with balloons larger than 18", though, so someone else may have a better idea.

    Round balloons are made on several types of molds, which determine their shape. Most balloons of a 'normal' size are dipped on bulb molds. Those balloons, when inflated, have the traditional teardrop (or, if you're an an enthusiast like us, Lightbulb) "balloon" shape. These balloons will generally develop long necks relatively easier, some brands more readily than others. Most balloons up to 14" are dipped on bulb molds, as well as some intermediate size balloons -- Belbal/Cattex 17s are bulb molds, as are Qualatex 16s. When uninflated, they look like, well, a bulb and are "round". The Qualatex 24" was also dipped on a bulb mold, which is part of why looners loved them so much. they were like a regular balloon, just really, really big! I regret missing out on them.

    By contrast, larger balloons, to save space and material during production, are dipped on an x-shape "fluted" mold. Balloons made on fluted molds will have rather defined folds in the uninflated balloon. Balloons made on fluted molds tend to inflate much rounder than bulb-dipped balloons, and usually the only way to get necks on them at all is to force the neck to form, usually by pre-inflating the neck prior to inflating the balloon fully. The much sharper angle of the transition from body to neck makes it much more unlikely that a neck will form on a fluted balloon naturally, they will be more likely to pop from overinflation rather than form a neck. Their necks tend to be short, as well, though that's not always the case. Pretty much every balloon larger than 18" rated size is made on a fluted mold, with some exceptions like the Q24 mentioned above. The balloon in the video was made on a fluted mold.

    The last type of round balloon mold is a paddle, which creates a balloon that lies flat when uninflated. the largest balloons tend to be made on paddle molds, usually starting at 36", though the Cattex 32" longneck is also a paddle mold. They're not round, but Cattex's banners (GL500 et al.), as well as all of their animal shapes are made on paddle molds. Look at one uninflated and you'll see what I'm on about. Paddle molds are seen much less frequently than bulb or fluted molds, each one inflates differently, whether by happenstance or by design.

    Good news for you -- Balloons are cheap, the worst that could happen is you pump one up and it doesn't take the bouncing. you can use a clip to temporarily seal the balloon so you could test at various inflation levels. They can almost always support more weight than you think they can, too.

    Comment

    • heaviest
      Senior Member
      • Jun 2018
      • 914

      #3
      Thanks for all the great info! I hate to think I have more stuff to buy, but it looks like fun!

      Originally posted by Thinskinned
      The balloon in the video is underinflated a bit, those are Qualatex 36" balloons, and that one doesn't look like it's anywhere near 36".
      The one in the video, inflated like that, looks about perfect for 250 pounds and gentle bouncing. I will try different things to get more neck and more probability of a burst, things that I want, but I also need something a 250 pound woman can sit on and feel like it might burst, and there's a real possibility of a burst, but it probably won't, because that's what she wants.

      I'm 410 pounds, enough that I really should avoid a fall, which is why I'm not into balloons, but she's looking for something more dangerous than a beach ball. She's too heavy for 36 inch beach balls, though they are fun to patch and re-use, and not heavy enough for 42 inchers, which are made of thicker material.

      A 36 inch beach ball feels like it should burst but usually doesn't. It stretches a lot with 250 pounds on it, and she adds air as it gets soft, until it reaches the maximum stretch for this session, and then she lets it recover for the next session. The perfect thing for her to sit on to watch TV. We love patching the holes in the poles, but once there's a hole in the side seam, the ball is done. In a very boring way. And that's what always happens.

      This 36 inch balloon looks like the thing to try next. Mostly just sitting, but maybe some gentle bouncing. If it turns out to be too sturdy, we can add air!
      Last edited by heaviest; 21-05-2025, 07:34.

      Comment

      • Hotel Staff Member
        Chairman of Hotel Lavanza
        • Oct 2024
        • 66

        #4
        From 1-5, how would you rate my service?

        Hotel Lavanza is always looking for new clients! We pride ourselves on cleanliness and management.

        Comment

        • LoonerHoax
          Senior Member
          • May 2020
          • 521

          #5
          I'm 225ish and I can sit/bounce (light to moderate) for hours on the 36" Sempertex when freshly inflated to full. They neck great and seem to handle multiple inflations/rides well. If you want more durability, double them up.

          Comment

          • AlterPlatzer
            Senior Member
            • Jun 2024
            • 1528

            #6
            Weight isn't always a major factor when it comes to determining one's ability or inability to pop a balloon.

            Over the course of many years of hosting birthday parties for my kids, with lots of balloons and balloon games, I observed a few things about balloons. I usually would have a sit popping relay and mix the teams with both kids and their parents. It seems that both kids and adults experience about the same level of difficulty with popping balloons using their body weight.

            In more intimate situations...

            I weigh about 90 kg. A woman I was involved with at the time weighed about 80 kg. The two of us together were able to have sex on top of a Q24 with our entire combined weight on the balloon. I only used my fingertips to maintain balance and the Q24 stood up to 170 kg of bouncing weight. We never once had a balloon pop on use while doing this. We also did this with Q36s, but found it to be easier with Q24s.

            With that in mind, how much the balloon was inflated was the most important factor. If the balloon was fully inflated, it probably wouldn't last long. Slightly underinflated, it could withstand our 170 kg and the neck would always bulge quite nicely under our weight.
            It's OK to love balloons.
            There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

            Comment

            • lucid
              Senior Member
              • Sep 2016
              • 1174

              #7
              I dont do alot of riding or sit popping myself. But there have been a few occasions where my girlfriend wanted to be particularly mean and she forced me to straddle some of my big balloons and bounce on them till they pop. There's no way I'd have done it, but she threatened to pop all my balloons if I didn't sit pop the ones she picked out. Over the years she's done this, my weight has fluctuated from 180 to 260 lbs. Even at 260, I really had to give it hell to pop tuftex 17s and 24s. Also doing it on the bed to avoid busted kneecaps. We are always surprised how hard I have to bounce to make them pop.

              One incident I remember specifically is when she made me bounce pop a crystal yellow tt24. She was on the edge of the bed and one hand was on my junk and her other hand was pulling on the neck every time id bounce. It seemed like the neck shot out 3ft every time until it popped. I'd try some of those if I were you. Although id say trying this anywhere other than a bed would cause it to pop much quicker.

              Comment

              • heaviest
                Senior Member
                • Jun 2018
                • 914

                #8
                FWIW we got a selection of printed Q36's. Hearts, stars and happy birthday, in pink, red, blue and black. By me holding it twisted shut as she sat and laid and bounced on it, we figured out the right inflation size for her. At 265 pounds she's almost twice the size of the woman in this video, and it makes a LOT of difference in the perception of how badly stressed the balloon is.

                I think we got the perfect balloon for the task. The appearance of stress, with minimal bouncing, as she mostly just likes to sit on it, with her feet suspended off the floor. It's a lot harder to balance than a beach ball, but she can plant her heels to watch TV or game.

                And she has popped a couple. Didn't have to work at it as hard as the woman in the video, but she's confident an accidental pop won't happen often. But it took her a while to become not terrified it would burst just by sitting on it!

                Comment

                • heaviest
                  Senior Member
                  • Jun 2018
                  • 914

                  #9
                  The woman I bought the balloons for is currently about 295 pounds. She's build like a male weight lifter who is also quite fat. She abuses steroids and does bulking but not enough cutting. Big girl, with big arms and legs. Holy crap, that looks like it should pop big. We've tuned the amount of air we put in the balloon so that it usually doesn't pop just by sitting on it, but it sometimes does pop. It's not interesting if there isn't the possibility of a pop.

                  Another woman is about 350 pounds and just fat, with extremely large boobs. She sat on a 36 that was inflated for the 295 pound girl and managed to no pop it, and the other woman was thrilled to see it look so much like it should pop. I handed her a 50 pound dumbbell. Both balloons squashed and necked, and neither popped. Until they bounced. Just a little bit. Two very satisfying, loud pops.

                  I'm more into inflatables than balloons, but seeing a 350 pound woman with gigantic boobs hit the floor after a pop is quite a thing to see.

                  Comment

                  • loonlun
                    Senior Member
                    • Mar 2021
                    • 410

                    #10
                    Unless those balloons have defects or they're blown up well above rated size, it's surprisingly hard to make them burst just from minor bouncing or even riding.

                    Comment

                    • Qbubbleballoon :-P
                      Fly with me (;
                      • Mar 2026
                      • 229

                      #11
                      If only James Gunn saw this video and took influence.....he just might still have a job with the DCU....🫤🫤🫤

                      Love ❤️❤️

                      Comment

                      • heaviest
                        Senior Member
                        • Jun 2018
                        • 914

                        #12
                        Originally posted by loonlun
                        Unless those balloons have defects or they're blown up well above rated size, it's surprisingly hard to make them burst just from minor bouncing or even riding.
                        At 350 pounds? I'm not complaining, but yeah, we have the option of not inflating them as much.

                        One of these women is smaller than the other (295 pounds) and has been on 36 inch balloons lots of times, and for her the proper inflation level is that it feels like it will burst but usually doesn't, even with a little bit of bouncing. And at that level of inflation the larger woman got on, and the smaller one took a 50 pound dumbell on her lap, and they bounced a little. I'm not complaining at all that they popped. We were pushing it.

                        Comment

                        Working...