Weakspots?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Whale Rider
    Senior Member
    • Nov 2022
    • 531

    #46
    Re: Weakspots?

    Originally posted by gardenofwank
    Well, I bought about 500ml of pre-vulcanised latex and used some of it to patch my Chinese balloons that are very prone to pinholes (see first attachment).

    This even works for more heavy-duty stuff like holes (see last attachment). It takes about 30m-1hr to fully cure and the result is a usable balloon. I use this especially on big ones since it sucks to have to toss out an 18" because of a small hole.
    so you just... dip or do you use a brush? how long can you keep the liquid latex usable I imagine it get solid after half a year?

    Comment

    • andrew_looner
      Member
      • Feb 2019
      • 95

      #47
      Re: Weakspots?

      Originally posted by Whale Rider
      so you just... dip or do you use a brush? how long can you keep the liquid latex usable I imagine it get solid after half a year?
      I use a spoon handle to apply a bit of latex. I keep the liquid in an airtight container - it should last about a year or so; it doesn't solidify, it only forms a film on the top of the liquid.

      Comment

      • Azurefox
        Member
        • Jan 2023
        • 55

        #48
        I'm sorry to necro this but I believe I have something to add here.

        There is a #8 defect. That is balloons in a pack that are stuck to themselves or others. if you pull them apart, it feels like pulling something away from glue.
        From my experience, this is a fatal defect. pulling latex from itself seems to damage it in some way. I've had a couple of experiences where a balloon from a bag was stuck to itself (qualatax) and popped on inflation. For that reason, I will discard any balloon that sticks to itself because, as a non-popper, I am kind of paranoid about that thing.

        Comment

        • Nickloon
          Member
          • Jul 2022
          • 62

          #49
          If the balloons stick together, it is a clear sign that they are old and far past their use-by date. Respectively, they can be inflated, but it is a lottery ticket, the latex is weakened and already noticeably degraded.
          I wouldn't say it's a manufacturing defect, more like age.​

          Comment

          • Azurefox
            Member
            • Jan 2023
            • 55

            #50
            Originally posted by Nickloon
            If the balloons stick together, it is a clear sign that they are old and far past their use-by date. Respectively, they can be inflated, but it is a lottery ticket, the latex is weakened and already noticeably degraded.
            I wouldn't say it's a manufacturing defect, more like age.​
            I wouldn't say necessarily. The experience I quoted was a bag of brand new sapphire blue qualatex. The talc powder inside the balloon is for the purpose of preventing the balloon from sticking to the mold and itself inside the package. If the talc isn't there properly, I would still call it a manufacturing defect rather than age. If the balloons are very old, you'll know too by the smell.
            Last edited by Azurefox; 15-11-2023, 18:02. Reason: Apparently I stutter when I type.

            Comment

            • Sit2Pop
              "Laykir The Loonedge"
              • Oct 2023
              • 100

              #51
              Originally posted by Azurefox
              I'm sorry to necro this but I believe I have something to add here.

              There is a #8 defect. That is balloons in a pack that are stuck to themselves or others. if you pull them apart, it feels like pulling something away from glue.
              From my experience, this is a fatal defect. pulling latex from itself seems to damage it in some way. I've had a couple of experiences where a balloon from a bag was stuck to itself (qualatax) and popped on inflation. For that reason, I will discard any balloon that sticks to itself because, as a non-popper, I am kind of paranoid about that thing.
              Yeah, balloons sticking together is a bit of a mixed bag for me (no pun intended). If they aren't sticking too bad, then the balloons are usually ok, but if they are super sticked together, and require decent force to separate, then the balloons have most likely weakened, and I notice the areas where they stuck together to stretch out and inflate first, further proving the fact that area weakened. Usually I can still use them (albeit slightly underinflated), but I have to be careful, making sure not to be too rough, especially with the weakened area of the balloon.

              Comment

              • Slow DeFlaite
                Senior Member
                • Apr 2023
                • 314

                #52
                (2) Defect can be corrected sometimes using a Hair Dryer to Shrink the thinner latex and contract it back together.
                (6) I LOVE The "Circle of Doom!" It's VERY thin. I call it a "Fisheye". Sometimes when it Fails the Balloon will burst. Other times it fails and olnly opens up as far as the circle without tareing the Balloon! It makes a Sexy Hissing sound as the balloon is deflating. You can either ride it down flat or patch it with scotch tape & blow it back up. Personally I place the tip of my twink up to the Hole and let the air do it's work!

                Comment

                • Azurefox
                  Member
                  • Jan 2023
                  • 55

                  #53
                  Anyone get balloons sometimes that are very uneven at the inflection point (You know that part where the bulb attaches to the neck)?

                  Sometimes if you look at a balloon in profile, one side will have a very smooth curve while the other side will be much sharper. Do you find these balloons have a tendency to randomly pop or is it just my imagination?

                  Probably just another one of a phobic's unreasonable paranoia. Sometimes I feel like I'm actually looking for excuses to waste balloons (that might otherwise be perfectly viable).

                  Comment

                  • Absalon
                    Junior Member
                    • Oct 2023
                    • 4

                    #54
                    I suddenly received such a helium balloon and I am very afraid of it. It seems to me that such a defect is much more dangerous than creases from storage or church windows. What do you say?
                    You do not have permission to view this gallery.
                    This gallery has 1 photos.

                    Comment

                    • NonPopExpress
                      Senior Member
                      • Dec 2023
                      • 230

                      #55
                      Eeeeeeek I'd be letting that one float away.. that is terrifying. Looks like some of those photos of failed tyres haha

                      Comment

                      Working...