About inflating banner balloons

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Elialoons72
    Junior Member
    • Oct 2026
    • 15

    #16
    Originally posted by Thinskinned

    The one caveat I will mention is if you partially inflate it multiple times (as in, leaving the same portion uninflated and unstretched on multiple inflations), the possibility goes up that trying to get that part to inflate naturally will result in the balloon popping because the latex is more stretchy in the other parts. I learned this to my own detriment with a CQ24, I'd never inflated the neck the whole way down, only halfway or so on 3 or 4 inflations, and when I tried to push it further on a pump it simply popped before the remainder of the neck inflated. you can "fix" this by trying to find a way to get the part you weren't able to inflate inflated. I've had luck using old socks with the toes cut off, a cut-off leg from a pair of old pants, or even an empty paper towel roll, anything that can restrict inflation of the parts that you don't want to inflate at that time. You want the whole balloon to be nice and evenly stretched!
    Thanks! I’ll be taking this into account next time I can really inflate it. It definitely shows that the bulb is less stretched than the rest so I’ll try to atleast once get the end inflated fully. I have a small handpump I can maybe try to use to get that part started since my lungs aren’t all that strong.

    It’s crazy because while I was inflating it, I put so much air (or so I thought) just to look at it sideways and noticed it was barely halfway inflated 😅. At that point I couldn’t take it anymore and I had to stop and calm myself a little. It just kept taking more and more without and at that point the back pressure was almost gone so it felt like it was doing nothing lol. These things are massive and to think there’s a 27*87 variant haha. Atleast I know I can trust the balloon now which is great for my stress


    Comment

    • Thinskinned
      Look Out!
      • Jul 2024
      • 247

      #17
      Here's the mathpost-

      It has to do with the way pressure is applied to the material.

      Let's talk some math.

      A GL1200's rated size is 87in L x 32in W. It's not an ideal cylinder but let's pretend it is. At rated size the surface area of the balloon is roughly 10,000 square inches. 160kg is about 350 lbs. If you put your entire weight on the balloon, like lying down on it with your hands and feet off the ground, the 350lbs of your body weight is applied to the air inside the balloon, which redistributes the internal pressure force evenly to all of the area that your body is not touching. If the balloon is on a soft surface, lots of that additional weight is also transferred to the surface itself. This is why it's more difficult to sit-pop a balloon on a bed or a sofa instead of a tile floor or unpadded chair.

      If we assume that your body has 5,000 square inches of contact area with the balloon, the weight of your body is going to be evenly distributed across the remaining 5,000 square inches -- this math works out to roughly 0.07 pounds per square inch, which is not that much. A balloon inflated to the point of bursting could be up to 2 psi worth of pressure -- keeping in mind that's 2 pounds of pressure pushing on every square inch of the material from the inside. Cattex balloons for the looner market (as well as their decorator balloons, but looner balloons moreso) are also significantly thicker than your standard party balloon so the number might even be higher than that! your weight on such a large balloon does not meaningfully affect the balloon until such point as the added pressure from your weight is the difference between the pressure the balloon can withstand and the pressure it cannot.

      This is, of course, a gross oversimplification in pretty much every way but the long and short of it is that a very large balloon can take quite a lot of weight before bursting, as long as there are no sharp edges on your person that are going to apply significantly more force to a far smaller area of the material.

      On your bed or other suitably soft surface you could probably sit on a 17-inch balloon inflated to rated size and not pop it

      Comment

      • Elialoons72
        Junior Member
        • Oct 2026
        • 15

        #18
        Wow that’s crazy how the math works out considering the weight that was taken into account is 350lbs! For context I weigh just under 110 (I’m a tiny 5’3 gremlin). It does make alot of sense considering just how much air there is to compress in such a large area but I never thought it would make such a small impact. Just goes to show that I should be able to trust these balloons a lot more than I do ❤️.

        It does make sense from my previous experiences with (relatively) smaller balloons via when I only had cheap (quality wise cause they were ridiculously expensive for what they’re worth) party store 36s. Inflated to about 28 it could take almost my full body weight at the time and these were absolutely horrendous quality. They wouldn’t inflate evenly, the latex was thin and easily transparent, the folds were noticeably thinner and they were full of imperfections yet they still survived.

        I also do always have my sessions on my bed and I always make sure to be fully in soft fabric so that’s a plus. Next time I might have what it takes to bite the bullet and go all in. The more I play, the more my fear retracts although unfortunately it’s prone to violently resetting all my progress if something goes wrong which makes this a lot harder 😞

        Comment

        • Carlos
          Member
          • Nov 2016
          • 63

          #19
          I only ever lost a cattex banner balloon when I was rapidly inflating it with an air mattress pump, and it popped about halfway through. Scared the bejeezus out of me and my then-GF, who I was introducing to balloon play for the first time that night. Thankfully I brought a spare and mouth inflated it as fast as I could before the moment was lost, and we had amazing sex on top of it with no issues from there.

          Comment

          • LoonerPlanet
            Senior Member
            • Nov 2018
            • 157

            #20
            I, too, inflate the neck of gl balloons first, but then I start inflating from the tip. I do that to ensure that the tip is well stretched out as I inflate the rest of the balloon. That way you can get a :balloon that looks full at about 5'10", but still soft and good for a ride. I typically keep blowing and my gl 700's regularly go over 6 feet. And the second, third and fourth, etc inflations are massive. These balloons are tanks. The only ones that have popped are either old or inflated too big too many times.
            Attached Files

            Comment

            • Bigballoonlover69
              Junior Member
              • Sep 2019
              • 15

              #21
              I sometimes get worried inflating gl500s but inflate from the bottom to the top and sadly 2 orange ones popped during inflation

              Comment

              • Qbubbleballoon :-P
                Fly with me (;
                • Mar 2026
                • 229

                #22
                Banner balloons are indeed difficult to inflate. I always used to start at the neck end and work my way forward, so to speak. It always worked out that I didn't have any pops but i always ended up with a 🥕 carrot! I one day was told that was the improper way to blow it up a gl-1200 so I started blowing up from the far end first. Every time resulted in a big pop. I did a sort of "compromised approach " , inflate the neck just a little...hold on it as it inflates...let the air go into the middle and let it swell up. Hold onto it with your arms and before the neck or end fully inflates, let it go! Both ends inflate evenly and you'll have a perfect GL! I've done it a thousand times with a standard powered balloon 🎈 pump with zero pops on inflation!

                Im a skinny twig who barely tips the scale at 130 pounds so playing on massive, over inflated balloons 🎈 is not an issue for me but I've been known to get rough and abuse my balloons!!😅

                Comment

                • Hellus
                  Tough Blower
                  • Mar 2025
                  • 182

                  #23
                  Originally posted by LoonerPlanet
                  I, too, inflate the neck of gl balloons first, but then I start inflating from the tip. I do that to ensure that the tip is well stretched out as I inflate the rest of the balloon. That way you can get a :balloon that looks full at about 5'10", but still soft and good for a ride. I typically keep blowing and my gl 700's regularly go over 6 feet. And the second, third and fourth, etc inflations are massive. These balloons are tanks. The only ones that have popped are either old or inflated too big too many times.
                  Looks awesome! Here's mine, probably the thinner version.

                  20251124_233816[1].jpg

                  Comment

                  • Qbubbleballoon :-P
                    Fly with me (;
                    • Mar 2026
                    • 229

                    #24
                    Originally posted by Hellus
                    Looks awesome! Here's mine, probably the thinner version.

                    20251124_233816[1].jpg
                    Hee,hee! 🥰
                    It almost looks like a banana!!🍌
                    Hella awesome!!🤭🥰❤️

                    Comment

                    Working...