Balloon printing, could use some advice

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Blueballoondude89
    Senior Member
    • Apr 2022
    • 240

    Balloon printing, could use some advice

    Hello, I don’t know how far I’ll get with this but does anyone do screen printing? Especially on latex balloons? I’ve been OBSESSED with this over the last 2 months. I had some success burning some screens (despite every setback and all the money wasted) and I want to do double sided prints but obviously, I need to do it properly so I won’t mess the one side up. Asked on Reddit but didn’t get any good answers. I tried doing a print today and I got too much ink smudge on it. It doesn’t look that bad but I’m a little annoyed. I just wanted to do two different designs on the same balloon, instead of taking one and putting it on one balloon and then the other on the other balloon. I really hope someone can help me. Do I need ink that cures faster? I use Speedball acrylic ink. The ink that’s made specifically for latex balloons is super expensive. I am trying to figure out a way to sandwich the balloon between 2 screens, if that will even work. I held the screen between my legs and put the squeegee in one hand and held the balloon in the other.
  • LoonPopper
    Senior Member
    • Aug 2011
    • 772

    #2
    Well one you need the ink for the latex, because that's what's it's intended for, The speedball acrylic ink has no "stretch" and it's not for latex, it for t-shirts, etc. You'll be better finding a custom balloon printer business, otherwise you're just wasting money, And yes to do a double sided print means you would need the ink to dry before doing the other side, or it will just smudge, also again it's smudging because it's acrylic ink, not latex ink.
    Blow, Baby, Blow...when will it pop nobody knows!

    Comment

    • cl23
      Senior Member
      • May 2022
      • 381

      #3
      I recommend real balloon printing inks as well. I never used screens for printing (bought all i'd need but it's just too much effort), just painted balloons with a brush and now am using 3d printed stencils for simplicity, but the balloon ink sticks perfectly to the balloons. The quality of my "prints" is still far from professional, but i can paint completely unstretched balloons, only with enough air to be in shape. After drying i inflate them to the max and the ink stretches and sticks to the balloon perfectly. Deflating and inflating many times is no problem.

      This ink is great, even after being stored for more than 5 years!

      Comment

      • Blueballoondude89
        Senior Member
        • Apr 2022
        • 240

        #4
        Originally posted by cl23
        I recommend real balloon printing inks as well. I never used screens for printing (bought all i'd need but it's just too much effort), just painted balloons with a brush and now am using 3d printed stencils for simplicity, but the balloon ink sticks perfectly to the balloons. The quality of my "prints" is still far from professional, but i can paint completely unstretched balloons, only with enough air to be in shape. After drying i inflate them to the max and the ink stretches and sticks to the balloon perfectly. Deflating and inflating many times is no problem.

        This ink is great, even after being stored for more than 5 years!
        where did you buy this ink? I’m thinking MAYBE I’ll buy from Florida Flex but there has to be a cheaper option in the same quality.

        Comment

        • cl23
          Senior Member
          • May 2022
          • 381

          #5
          I bought the ink years ago from a German seller on eBay, but the item was discontinued.

          Comment

          • lucid
            Senior Member
            • Sep 2016
            • 1174

            #6
            Yeah bro it's mandatory to use ink made for balloons. Any other kind just isn't gonna work or hold up right. I got mine from Florida Flex as well. I actually dont know of another source but im sure there have to be others. It is pricy but you also get more than what it looks like. You have to dilute it in order to thin it out a bit.

            I'd love to tell you I made awesome printed balloons, but they came out blobtastic lol. These balloons looked like they were shat upon by a pigeon who'd eaten nothing but mexican food for a week straight. Im sure you'll do better than i did lol.
            Apparently you can go on YouTube and learn how to perform open heart surgery on yourself but the secret arcane knowledge of screen printing balloons is so heavily guarded that there's no trace of it on the whole internet.

            I'm gonna try it again myself, only next time I'm also going to order some pre-burned screens to simplify things.

            As far as printing on both sides of the balloon: What you can do is cut a hole in a sheet of plywood that your balloon can almost fit through. Sit the balloon on the hole, so that nothing is touching the middle where your print is. Then just have your other screen ready to go, flip the balloon and do the other side. This method will also help you to keep the prints somewhat centered.

            You may want to line the sharp edges of the plywood with something soft so it doesn't pop your balloon. Or, you could probably use this same technique with a stiff enough piece of cardboard.

            Comment

            • cl23
              Senior Member
              • May 2022
              • 381

              #7
              Originally posted by lucid
              Apparently you can go on YouTube and learn how to perform open heart surgery on yourself but the secret arcane knowledge of screen printing balloons is so heavily guarded that there's no trace of it on the whole internet.
              Absolutely wrong. On YouTube you can find at least more than enough to start:






              There are many more videos. It's screen printing, so the largest part is learning general screen printing and there are tons of information about this, but enough for printing balloons as well.

              Comment

              • lucid
                Senior Member
                • Sep 2016
                • 1174

                #8
                Originally posted by cl23

                Absolutely wrong. On YouTube you can find at least more than enough to start:






                There are many more videos. It's screen printing, so the largest part is learning general screen printing and there are tons of information about this, but enough for printing balloons as well.
                Well maybe I should have said that I couldn't find anything about it lol. This is good to know tho. Thanks for the info.

                Comment

                • Blueballoondude89
                  Senior Member
                  • Apr 2022
                  • 240

                  #9
                  I’m glad I got the screen burning part down (mostly) but now I’m worried about curing the ink. I ordered ink from Union Inks (the shipping basically costs what the ink costs ) and it gives me instructions on mixing but now I’m
                  worried about actually applying it. Do I deflate the balloon and THEN air dry? Or do I air dry it with the balloon partially blown up? If anyone can give me a direct answer, I will be ecstatic. If the answer is in any of those YouTube videos then yay. Can I use any kind of electric egg beater to mix the ink? The only mixer that I recall is in our garage is for mixing grout in a large bucket, and we are going to need it for re-tiling a new bathroom floor soon.

                  Comment

                  • cl23
                    Senior Member
                    • May 2022
                    • 381

                    #10
                    Blueballoondude89
                    The balloons need to stay partially inflated at the size, they were printed at. You have to experiment, how long it will take. If you can ruin a print, when touching it, it was not enough time. Test touching the print after deflation as well.
                    You can use e.g. a hair dryer on a low setting to speed up the process of drying and you should shrink the balloons with warm air after deflation.

                    Comment

                    Working...