I think I'm reaching the non-popper extreme!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MrMars
    Member
    • Aug 2024
    • 54

    I think I'm reaching the non-popper extreme!

    Today I started repairing balloons that came with defects or that had defects with use!
  • Kummelkopp
    Member
    • Feb 2025
    • 91

    #2
    How do you do that?

    You seem to be very confident in your repair skills.😊

    As a non popper, I wouldn't trust a patched balloons, lol...Like at all

    Comment

    • MrMars
      Member
      • Aug 2024
      • 54

      #3
      Originally posted by Kummelkopp
      How do you do that?

      You seem to be very confident in your repair skills.😊

      As a non popper, I wouldn't trust a patched balloons, lol...Like at all
      The process of repairing balloons is very simple, and the repaired area will be stronger than the rest of the balloon! Basically, you glue a piece of latex to the damaged area of the balloon, such as a hole or a small tear. The equipment you need is a piece of latex similar to the balloon you're repairing (I'm using some from balloons I accidentally popped), isopropyl alcohol, and rubber cement (a glue for latex inner tubes used in bicycles). You use a few drops of alcohol to clean the area of the balloon you're repairing (balloons contain talcum powder, which can interfere with the bonding). You clean the area of the balloon and the piece of latex with alcohol. Then, apply the glue. Spread it quickly because it dries quickly. Let the glue dry 30 seconds after applying the glue. Then, you apply the piece of latex to make the repair. Press the repair with your fingers to ensure it adheres well for a minute, then wait 24 hours for the repair to be perfect! It's best to turn the balloon inside out so you can repair it from the inside.

      Comment

      • inflatedskintight
        Senior Member
        • Sep 2019
        • 124

        #4
        I've done this too, experimentally. I had some cheap printed balloons where the printing had somehow weakened the latex so that you couldn't blow them up at all without them popping. So I cut up one of the faulty balloons to make patches for the printed area on the others, and glued the patches on the inside using rubber cement from an ordinary bicycle inner tube repair kit. It worked amazingly well, the resulting balloons blew up fine and I had a great time playing with them, seeing what kind of stress they could take. Result: as much as a normal balloon, basically. One of the burst because my gluing wasn't very careful, but it was my first attempt.

        It felt very rewarding to repair balloons!

        Comment

        • AlterPlatzer
          Senior Member
          • Jun 2024
          • 1528

          #5
          I don't think I would ever do that.

          It's OK to love balloons.
          There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

          Comment

          • cl23
            Senior Member
            • May 2022
            • 381

            #6
            I only repair more expensive balloons, but i love making my own shapes by glueing balloons together with rubber cement.
            Through the transparent ears, you can look into the rest of the balloon:

            1.jpg 2.jpg 3.jpg 4.jpg

            Comment

            • balloonPatcher
              Senior Member
              • Jun 2020
              • 291

              #7
              IMG_6734s.jpg IMG_6735s.jpg

              I really enjoy repairing balloons too. This is a 6 liter bladder that has been repaired after bursting. It also has an SPH added.

              Comment

              • theloonerboy
                Member
                • Mar 2024
                • 285

                #8
                Originally posted by cl23
                I only repair more expensive balloons, but i love making my own shapes by glueing balloons together with rubber cement.
                Through the transparent ears, you can look into the rest of the balloon:

                1.jpg 2.jpg 3.jpg 4.jpg
                Wow - this is one of the coolest balloons on this forum! Great job!

                Comment

                • cl23
                  Senior Member
                  • May 2022
                  • 381

                  #9
                  theloonerboy
                  Thanks for the kind words. I also find this balloon really cool and will not pop it (i gave it a face that's always smiling to me, so i can't ). This one is about 1 meter tall. I will try making bigger balloons like this and different shapes. A four legged balloon dog as one balloon compound would be so cool.

                  Comment

                  Working...