Recommendations for sitting etc

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AlterPlatzer
    Senior Member
    • Jun 2024
    • 1528

    #16
    Originally posted by RyzOmar
    I suppose in terms of positions, I would sit similarly but straddling, lets say, a bench.
    Just so we're on the same page I went searching for some better pictures to illustrate my balloon bouncing preferences.

    This my preferred sitting position. I don't have all my weight on the balloon so I don't accidentally pop it:

    GL9MgZZ.jpg

    With smaller balloons like a Belbal 14, I might use the bed corner with my feet on the floor to limit the downward pressure.

    nzxbzb6.jpg

    I've also tried using a chair which works OK with Belbal 14s, but can be dangerous with larger balloons.

    KflgRCa.jpg

    I also like the "neck to the side" sitting position.

    Ox4XuP9.jpg

    Even though I like bouncing on bigger balloons, it can be a long way to fall if it accidentally pops.

    When I'm bouncing on bigger balloons I tend to under-inflate them so I don't fall as far with an accidental pop, but I don't enjoy them as much as more fully inflated balloons.

    jZRY1XX.jpg

    Originally posted by RyzOmar
    By the way, how many balloons do you go through on a yearly basis? And regarding stash, what do you consider big or small?
    My stash is more like an inventory. I still do professional balloon decorating on a limited basis. It's not the income that it once was, but it still accounts for the majority of my balloon usage.

    As far as balloons I use to enjoy myself, I follow the inflate, tie, enjoy, dispose model. I don't reuse balloons. I inflate them once, use them and then dispose of them. Some balloons last longer than others around here. Balloons that I have in my home stick around a long time. I have a few Cattex mouse balloons in the house that remain bright and fully inflated as they were when they were inflated a year ago.

    That being said, I have limited space for playing with balloons in my house. Although, I also have a dacha where I tend to get a little more extravagant with balloons in. The problem is that it is not heated in winter or cooled in the summer, so balloons there only last a few days in the spring and fall. In the heat and humidity of summer, balloons only last a few hours.

    I dislike under-inflated and oxidized balloons. They get disposed of rather quickly.
    It's OK to love balloons.
    There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

    Comment

    • AlterPlatzer
      Senior Member
      • Jun 2024
      • 1528

      #17
      Yesterday, I blew up 24, 14" Belbal balloons and today I have 4 left.

      None of them were popped deliberately or while playing with them. They were all self-destructs.

      I think they're getting to the end of their usable shelf-life and it's time to start using them up.
      It's OK to love balloons.
      There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

      Comment

      • RyzOmar
        Junior Member
        • Dec 2024
        • 16

        #18
        Yeah, i noticed on some older tash that the balloons develop imperfections, church window like defects just by existing. Like I could see the balloon just fine, and the next day, or after some light use, several thin bubble/circle defects developed.

        I keep my balloons inside a drawer within their bags, with dissecant packets, and the house is normally around 70F so they last longer now. But its rare for me to have them more than a year or two.

        I also use and dispose most. Lately ive been experimenting with deflating, washing with warm water, repowder them with baby powder, and store it for future use. I dont have much data but using them like this I have enjoyed the same balloon at least 4 sessions still feeling strong.

        Comment

        • RyzOmar
          Junior Member
          • Dec 2024
          • 16

          #19
          Originally posted by AlterPlatzer
          Yesterday, I blew up 24, 14" Belbal balloons and today I have 4 left.

          None of them were popped deliberately or while playing with them. They were all self-destructs.

          I think they're getting to the end of their usable shelf-life and it's time to start using them up.
          Since you do decorations, what brands do you have experience on? What do you think are the "better" quality on durability at different sizes?

          Comment

          • AlterPlatzer
            Senior Member
            • Jun 2024
            • 1528

            #20
            Originally posted by RyzOmar

            Since you do decorations, what brands do you have experience on? What do you think are the "better" quality on durability at different sizes?
            Qualatex was always the go-to brand for balloons, but starting around 2016, their quality started to decline. Now, they're no more.

            The second choice was Tuf-Tex for 11" balloons. Their 17" are fluted and not molded like Q16s, so the Tuf-Tef 17" was not always an option.

            The last few years, I've been doing more with Decomex 11" and 18". They weren't the best quality when they first became available in the U.S., but they have improved.

            The drip point on Decomex balloons is a lot more pronounced than other brands. Some people complain about that.
            It's OK to love balloons.
            There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

            Comment

            • O'Dragon
              Senior Member
              • Jan 2024
              • 298

              #21
              When I lived with my parents I couldn't keep any inflated so I had to reuse balloons a lot of times. I sealed them with a half knot, later with a clip and rinsed under warm water after use so it shrunk back. Like this I could reuse a balloon 5 - 8 times without a problem.
              Today I like to keep one or sometimes two inflated for weeks and having fun with them. With good brands I found this is absolutely possible. They will start to oxidize depending on the humidity and can become unstable over time. But I'm having a 36'' balloon now for over three weeks and it still holds.

              Brands I am using for years now with which I never had a surprise pop besides overinflating the first time or getting unstable while being inflated for weeks are Cattex and rifco for softer balloons. Qualatex and tuftex a couple of yers ago for more firmer but now I use sempertex if I want strong but a bit more firm balloons.
              I can only speak for their modelling balloons and 36 inch but they can take quite a lot of rough playing. I had a white one pop once while laying down on it but that was due to being inflated for weeks and had started to oxidize.

              Comment

              • RyzOmar
                Junior Member
                • Dec 2024
                • 16

                #22
                I am interested in trying sempertex and perhaps decomex. I even read around here that while belbal 14 are gone, the cattex 14 are the same?

                Where do you guys purchase balloons from?

                I do agree with the comments regarding qualatex. While they still hold and are enjoyable, I did notice that from a generic 100 bag, many would either come with imperfections from the get go, or develop what seems damaga very easily. I am overly precautious so its been a while since I had a balloon pop, but over time I inevitably get bolder on them, and its probably a matter of time before I ride one until it gives.

                Comment

                • O'Dragon
                  Senior Member
                  • Jan 2024
                  • 298

                  #23
                  I purchased lately from balloons united besides them also very often fromJennyloons. Both a re very reliable and ship also internationally.

                  Here is also a post for some other shops 🙃:

                  Comment

                  • AlterPlatzer
                    Senior Member
                    • Jun 2024
                    • 1528

                    #24
                    Originally posted by RyzOmar

                    Where do you guys purchase balloons from?
                    Bargain Balloons is home to one of the largest selections of balloons online, with over 20,000 quality wholesale balloons and essentials! Start decorating, now!
                    It's OK to love balloons.
                    There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

                    Comment

                    • RyzOmar
                      Junior Member
                      • Dec 2024
                      • 16

                      #25
                      Man its like I cursed myself. I knew something was off about this blue belbal... It was too soft. Got carried away, pretended to ignore the imperfections based on some previous tough ones. And freaking loud bang!

                      Luckily I felt something was not right so I had inflated a second one. So I was able to finish but man, i hate it when they pop. Its been a while.

                      Thanks for the store suggestions.

                      Comment

                      • RyzOmar
                        Junior Member
                        • Dec 2024
                        • 16

                        #26
                        In everyone's experience, how do imperfections affect your use or enjoyment of balloons? I bought a ton of belbals and its going to be almost impossible to find one defect free completely.

                        I guess I am trying to convince myself its going to be fine hahaha but I would hate for pops to happen. Im just excited to get a huge neck!!!

                        Comment

                        • AlterPlatzer
                          Senior Member
                          • Jun 2024
                          • 1528

                          #27
                          Originally posted by RyzOmar
                          In everyone's experience, how do imperfections affect your use or enjoyment of balloons? I bought a ton of belbals and its going to be almost impossible to find one defect free completely.
                          You're going to have a lot of balloons pop on you. You will have to inflate more and deal with the pops until you have a balloon last long enough for you to get any excitement from.

                          I know you may find that frustrating, but that's how it goes.
                          It's OK to love balloons.
                          There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

                          Comment

                          • NonPopFairy
                            Gentle Looner
                            • Feb 2025
                            • 111

                            #28
                            Originally posted by RyzOmar
                            In everyone's experience, how do imperfections affect your use or enjoyment of balloons? I bought a ton of belbals and its going to be almost impossible to find one defect free completely.

                            I guess I am trying to convince myself its going to be fine hahaha but I would hate for pops to happen. Im just excited to get a huge neck!!!
                            in my experience most defects are just discoloration that don't really make the balloon prone to popping unless you're really rough from with them?

                            I haven't had any ones with discoloration like defects pop on me in years, though I guess I'm a few steps more cautious & gentle than average.

                            Comment

                            • RyzOmar
                              Junior Member
                              • Dec 2024
                              • 16

                              #29
                              Originally posted by AlterPlatzer

                              You're going to have a lot of balloons pop on you. You will have to inflate more and deal with the pops until you have a balloon last long enough for you to get any excitement from.

                              I know you may find that frustrating, but that's how it goes.
                              Man, that is kinda the bridge I am currently at. Mainly because I know a lot of them can work "fine" if underinflated but that also becomes monotonous etc .

                              I would hope not to deal with a ton of pops when possible, since most of my use will be in hotels etc, i would hate to be the annoying loud guy hahahah.

                              Comment

                              • RyzOmar
                                Junior Member
                                • Dec 2024
                                • 16

                                #30
                                Originally posted by NonPopFairy

                                in my experience most defects are just discoloration that don't really make the balloon prone to popping unless you're really rough from with them?

                                I haven't had any ones with discoloration like defects pop on me in years, though I guess I'm a few steps more cautious & gentle than average.
                                Yeah, i understand what you mean. I do have identified what seems like little marks from rough use. Like mini tears/bubbles thst develop with use? But with belbals at least I think a lot of them do seem like discolorations or something like that.

                                I guess that as long as the imperfections are not extremely prevalent or obvious, and it feels firm, it should be "fine".

                                Comment

                                Working...