Kuwi's Balloon thread

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kuwi
    Shy Cuddler
    • Nov 2022
    • 244

    #16
    Tried inflating them just now but gave up halfway because the tip wasn't inflating and the mid section (where the butt is) kept getting bigger 😂
    20250126_150937.jpg

    Comment

    • theloonerboy
      Member
      • Mar 2024
      • 285

      #17
      Originally posted by kuwi

      Sorry, I don't sell or trade the balloons I get because they are both expensive and against the sellers' wishes. Just this batch alone costs about 400 CAD. The main source of these prints can be found on the Japanese hobby site Booth or the Chinese site Taobao. You can also find various sellers on twitter as well.

      I will definitely be posting more balloons! 😊
      Geez! I thought my $40CAD with shipping per year was expensive!

      Comment

      • Bass Boll
        Senior Member
        • Jun 2023
        • 211

        #18
        Originally posted by kuwi
        Tried inflating them just now but gave up halfway because the tip wasn't inflating and the mid section (where the butt is) kept getting bigger 😂
        Ah, thank you for the extra attempt – what a cutie!

        You are aware of the golden rule of inflation for zeppelin balloons? Always start with the tip! And that needs a little forcing, as demonstrated in this video: https://youtu.be/MexmgFGdL4Q

        Comment

        • kuwi
          Shy Cuddler
          • Nov 2022
          • 244

          #19
          This week was a bit of a downer. There were some really cute prints on sale but I noticed them too late and they were sold out in an instance.

          I honestly shouldn't buy so much. I'm running out of space to store them lol.
          20250201_010139.jpg

          Will post some of them inflated later.

          Comment

          • kuwi
            Shy Cuddler
            • Nov 2022
            • 244

            #20
            Originally posted by Bass Boll

            Ah, thank you for the extra attempt – what a cutie!

            You are aware of the golden rule of inflation for zeppelin balloons? Always start with the tip! And that needs a little forcing, as demonstrated in this video: https://youtu.be/MexmgFGdL4Q
            Thanks for the tip! (Pun not intended.) I tried it but it's not working out for me. 😅 Maybe I'm not strong enough to keep the pressure on the rest of the body. 😔

            Comment

            • kuwi
              Shy Cuddler
              • Nov 2022
              • 244

              #21
              Originally posted by theloonerboy

              Geez! I thought my $40CAD with shipping per year was expensive!
              Anime printed balloons are very expensive since they are printed in-house by other looners and they are usually very limited in production. The prints are done by either commissioned artists or by the seller in high quality.

              Another factor is the brand and size. I tend to buy 16 to 36 inches so the prices per piece could range from 250 yen (2.34CAD) to 3500 yen (32.79CAD). I also tend to buy an extra in case the first one has any defects. (Very rarely)

              It's also quite sad to know some prints are sold once and you'll never be able to obtain them ever only to find them in a pop video. 😭

              Comment

              • kuwi
                Shy Cuddler
                • Nov 2022
                • 244

                #22
                Today's trio.
                20250201_015812.jpg
                20250201_015851.jpg
                20250201_015948.jpg
                20250201_020111.jpg

                Comment

                • NekoRosalina
                  Member
                  • Jan 2025
                  • 33

                  #23

                  Comment

                  • theloonerboy
                    Member
                    • Mar 2024
                    • 285

                    #24
                    Originally posted by kuwi

                    Anime printed balloons are very expensive since they are printed in-house by other looners and they are usually very limited in production. The prints are done by either commissioned artists or by the seller in high quality.

                    Another factor is the brand and size. I tend to buy 16 to 36 inches so the prices per piece could range from 250 yen (2.34CAD) to 3500 yen (32.79CAD). I also tend to buy an extra in case the first one has any defects. (Very rarely)

                    It's also quite sad to know some prints are sold once and you'll never be able to obtain them ever only to find them in a pop video. 😭
                    I'd love to get a hand on balloons with this print https://www.youtube.com/watch?v=THqxOQdikCQ Probably impossible to find.

                    Comment

                    • kuwi
                      Shy Cuddler
                      • Nov 2022
                      • 244

                      #25
                      Originally posted by theloonerboy

                      I'd love to get a hand on balloons with this print https://www.youtube.com/watch?v=THqxOQdikCQ Probably impossible to find.
                      I actually bought from the seller that sold that print a few times before. They're more into other fetishes right now but they still sell these balloons I think. I didn't buy this print but I did buy other prints from them.

                      Comment

                      • Bass Boll
                        Senior Member
                        • Jun 2023
                        • 211

                        #26
                        Originally posted by kuwi
                        Thanks for the tip! (Pun not intended.) I tried it but it's not working out for me. 😅 Maybe I'm not strong enough to keep the pressure on the rest of the body. 😔
                        I also never made it so elegantly single-handed as the guy in the video. Another way to do it is to start blowing just until a 20 cm diameter bulge (in a GL500; for a GL700, 30 cm will be more appropriate) has formed, usually much closer to the nozzle than to the tip. Then you work this bubble towards the tip using both hands. It takes a bit of kneading and pressing, and it might be that some air escapes on the way calling for another puff in-between. But once you got the bulge at the far end, you start blowing again, and the balloon will safely be filled "backwards". Please, give it another try, kuwi!

                        Comment

                        • kuwi
                          Shy Cuddler
                          • Nov 2022
                          • 244

                          #27
                          Originally posted by Bass Boll
                          I also never made it so elegantly single-handed as the guy in the video. Another way to do it is to start blowing just until a 20 cm diameter bulge (in a GL500; for a GL700, 30 cm will be more appropriate) has formed, usually much closer to the nozzle than to the tip. Then you work this bubble towards the tip using both hands. It takes a bit of kneading and pressing, and it might be that some air escapes on the way calling for another puff in-between. But once you got the bulge at the far end, you start blowing again, and the balloon will safely be filled "backwards". Please, give it another try, kuwi!
                          Thank you! I will definitely try agin next time when I have time! 😊

                          Comment

                          • kuwi
                            Shy Cuddler
                            • Nov 2022
                            • 244

                            #28
                            Today was a snowy yet happy day~

                            A new batch I ordered over the past 2 to 4 months has arrived!
                            Some of these were delayed purchases all the way back at the start of November and has accumulated, condensed and shipped from Japan!

                            20250203_182527.jpg

                            I calculated the total price *before* shipping and it amounted to
                            129,235 yen worth of goodies or CAD$1204.08

                            I've blurred the prints out one of the orders because I am unsure of the NSFW stance for anime on the forums.

                            These are exclusive seller supporter balloons
                            20250203_182129.jpg

                            The next two images are what I ordered and bonus balloons as gifts
                            20250203_181109.jpg
                            20250203_181318.jpg

                            A recent new seller that makes their own art for print
                            20250203_181751.jpg

                            Comment

                            • kuwi
                              Shy Cuddler
                              • Nov 2022
                              • 244

                              #29
                              Continuing on!

                              The Bakery set! Fun fact; In Japanese, bread is pronounced "pan"(パãƒģ), same as how French says it. But there's a pun/double meaning in Japanese where the sound of balloons popping is also "pan" so in balloon terms, a bakery ("panya" パãƒģåą‹) could also be a play on words for "Pop Room" aka Balloon Room.
                              20250203_182423.jpg

                              This next one is themed after Japanese New Year, the character is dressed in a traditional Miko outfit and giving out balloon fortunes!
                              20250203_182225.jpg


                              This batch included a booklet on how to play with balloons which was pretty cute!
                              20250203_182046.jpg

                              This is one of the more exciting one for me. I have been wanting the print on the right side for 3 years and the seller usually sell it once a year and each time I missed it by a minute! I am so glad I managed to buy multiple of that print! The rest are also cute. (One is pretty lewd though)
                              20250203_181031.jpg

                              This last one is NSFW and not sure to uncensor it or not lol I blurred out the prints.
                              20250203_181435.jpg

                              Let me know which prints you want to see inflated! 😊​

                              Comment

                              • Scooter
                                éĒĻčˆđåĪĐæ‰
                                • May 2022
                                • 497

                                #30
                                Beautiful prints! I hope you don't mind if I ask a question. You said these take 2-4 months to arrive. How much of that is waiting for the balloons to be shipped versus the actual process of getting the balloons from Japan to where you live? I live in Japan and was thinking about getting some prints off of Booth, and I was wondering if being in Japan would make the time until arrival quicker. Thanks!

                                Comment

                                Working...