Your latest purchase

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • inflatedskintight
    Senior Member
    • Sep 2019
    • 124

    Originally posted by Starj90
    Orange rollup armbands. I wanted clear but nowhere seems to make them!
    I love rollup armbands. Clear ones would be a dream!

    Comment

    • Guest

      Bought a few rings of small to medium sizes.
      Shop.jpg
      Blew up the Bluey double chamber ring fairly lightly, as the vinyl sermed very reluctant to stretch. Waited 30min then blew it up lots more, till it was firm and hard.
      Bluey1.jpg Bluey2.jpg
      Blew up the Swimtrainer till it was rock hard and swelling up beautifully.
      Swimtrainer.png
      Finished with the 2 x 30inch rings, also filled with breath till they got hard and solid, and it was very difficult to push any more air into them.
      Yellow ring and brown ring.jpg
      I did manage to blow another 15 or so breaths, into the 2 larger rings, after letting them sit for an hour. The rings didn't really get bigger, but rather just became rounder and balloon-like, and a bit thicker, with one side visibly bulging and warping from the air pressure.
      Last edited by Guest; 26-10-2025, 20:18.

      Comment

      • zycram
        Senior Member
        • Nov 2024
        • 408

        I most recently bought a Swimline peacock lounger which seems to be scarce in Europe. It was pretty expensive but...
        ...it yielded one of the best inflatable experiences for me so it was well worth the price!

        It has SEVEN valves... I inflated the air chambers one by one, all by mouth...
        I experienced with the quantity/pressure of air... central part 100% (soft), outer ring 90%, head 80%, wingsx2 100% (soft), backrest 100%/100% (tight) and...
        I pulled the head back so that I could rub it against my dick, hugged it held tight to it. My head was leaning against the backrest but otherwise I was lying on my back. I could let the whole toy sway back and forth... It was MAGNIFICENT!

        I did this for a few minutes, all while holding the head and pressing it against my stomach and... yes, my schlong. After a few more swings - ooooooohhhhh yeeeeeeeeeaaaaaah... I barely realized what a huge cumshot I made because the toy had stayed almost completely clean, with practically all the material landing on my stomach.

        I assume that like my swan, this toy can be used in the water too, although I have to wait until next summer to try it out in the lake. It's not much larger than my other peacock float but it seems to be even more versatile than my swan because it is better if you use it as a lounger: its tail is _huge_, acting as a pillow. If you have some kinky time with it, it's at the very least in the same league as my swan or even my skunk. This sway-back-and-forth thing is something that everyone should try out because the end is gonna be the orgasm of your dreams, especially if you somehow involve your partner too.

        Comment

        • Buzzsaw258
          Member
          • Jan 2022
          • 69

          I, just like I assume, many people on here look for end of summer clearances on inflatables and stock up for the long cold winter of fun. I stocked up a few beachballs and swim rings this year and put them with my stash. I just keep adding whenever I find something on sale and I started to wonder how many I actually have. Well, I can say im stocked up for awhile. I might have to get a little rougher or do some more bounce to pops! I also pulled out everything that I have that wasnt brand new and in the package that will be on the next post!
          You do not have permission to view this gallery.
          This gallery has 3 photos.

          Comment

          • Buzzsaw258
            Member
            • Jan 2022
            • 69

            Along with the brand new inflatables I wanted to pull everything out and see exactly what I have. I think im set for quite awhile!! Everything in these pictures have had many loads on them and the ones inflated are the current rotation that I have fun with on the regular. It is evident that I LOVE beach balls!! Enjoy taking a look at my collection!
            You do not have permission to view this gallery.
            This gallery has 5 photos.

            Comment

            • zycram
              Senior Member
              • Nov 2024
              • 408

              Originally posted by O'Dragon
              zycram YEEEEESSSS!!! Wohoo 🙌🏻 Saw your last message a bit too late so I assume you already had some fun with it.
              But what you can try out is lay down on its back facing towards the front paws.
              You gonna tilt a bit downwards probably because the head will get a bit squashed but you can rub yourself sooooo amazingly then against the skunk‘s back and grab the front paws for some steadiness. Feels wonderful. Have a lot of fun with it!
              I inflated it again... Finally! The hind legs are tighter than the front ones, and the body is soft, maybe a little bit too soft. But...
              I lubed up the toy. placed my feet on the hind legs and I was hanging upside down along the toy. The front legs and the head were squeezed quite a lot by my bodyweight. But I could still grab the paws. And...
              While yiffing, I could move along the toy just enough to maximize my pleasure. The material is soooooo soft!
              Although the body was soft, the hind legs were tight enough to hold my weight.
              I did the locomotion. I felt the whole toy along my body and it was wonderful. Even my legs were shaking while I was bouncing on the toy. Seconds later, I shot my load.
              I'll inflate the body and the front legs a little bit more and try again. But I'm proud to say, this was the only toy on which I didn't feel I would need to push faster to get a good quality orgasm. It just came by nature and I could pump away while getting the most out of the toy and the whole session.

              Comment

              • Big Thud Joe
                Senior Member
                • May 2017
                • 407

                I've just ordered some 47 inch beach balls from Shosu, looking forward to trying them out. I bought one of each of the transparent and glossy black.

                Also, I'm back in regular contact with Beile international, we are currently working on an extra large inflatable pickle, made of Gary's plastic. I originally bought the smaller 34 inch green pickles from Rhode island novelty about six years ago, but despite the shape being perfect, were just too small for my liking.

                I always dreamt of these things being much larger, and just wanting to "shoot my load" on that massively large negative curve. My custom ones will be somewhere between 68 and 72 inch tall (uninflated) Visually seeing these negative curves from a particular angle, one can see the light reflect off it in a certain way, and for me this is what initiates the very strong arousal and anticipation, I just feel that HUGE negative curve inviting me to f*ck it nice and hard. Being able to afford it, looking forward to this fantasy becoming true.

                This is just a basic spec sheet I've sent, can't wait to see them in their tangible form.



                Comment

                • O'Dragon
                  Senior Member
                  • Jan 2024
                  • 298

                  Originally posted by zycram

                  I inflated it again... Finally! The hind legs are tighter than the front ones, and the body is soft, maybe a little bit too soft. But...
                  I lubed up the toy. placed my feet on the hind legs and I was hanging upside down along the toy. The front legs and the head were squeezed quite a lot by my bodyweight. But I could still grab the paws. And...
                  While yiffing, I could move along the toy just enough to maximize my pleasure. The material is soooooo soft!
                  Although the body was soft, the hind legs were tight enough to hold my weight.
                  I did the locomotion. I felt the whole toy along my body and it was wonderful. Even my legs were shaking while I was bouncing on the toy. Seconds later, I shot my load.
                  I'll inflate the body and the front legs a little bit more and try again. But I'm proud to say, this was the only toy on which I didn't feel I would need to push faster to get a good quality orgasm. It just came by nature and I could pump away while getting the most out of the toy and the whole session.
                  Sounds amazing. Yeah you can shoot a good load on the skunk.
                  i definitely need to get it out again bit before that have to repair a front leg. Now sadly there is a small hole from my last session with it and i need to glue it still.
                  was a bit too overly excited last time 😂

                  Comment

                  • O'Dragon
                    Senior Member
                    • Jan 2024
                    • 298

                    Originally posted by Big Thud Joe
                    I've just ordered some 47 inch beach balls from Shosu, looking forward to trying them out. I bought one of each of the transparent and glossy black.

                    Also, I'm back in regular contact with Beile international, we are currently working on an extra large inflatable pickle, made of Gary's plastic. I originally bought the smaller 34 inch green pickles from Rhode island novelty about six years ago, but despite the shape being perfect, were just too small for my liking.

                    I always dreamt of these things being much larger, and just wanting to "shoot my load" on that massively large negative curve. My custom ones will be somewhere between 68 and 72 inch tall (uninflated) Visually seeing these negative curves from a particular angle, one can see the light reflect off it in a certain way, and for me this is what initiates the very strong arousal and anticipation, I just feel that HUGE negative curve inviting me to f*ck it nice and hard. Being able to afford it, looking forward to this fantasy becoming true.

                    This is just a basic spec sheet I've sent, can't wait to see them in their tangible form.


                    That pickle definitely does look inviting.
                    im very curious to the final product. Keep us posted I might also need interested in getting one when kts finished.

                    Comment

                    • Big Thud Joe
                      Senior Member
                      • May 2017
                      • 407

                      Originally posted by O'Dragon
                      That pickle definitely does look inviting.
                      im very curious to the final product. Keep us posted I might also need interested in getting one when kts finished.
                      Yeah, sure, no problem. I'll keep you looped in on a second batch. These are just prototypes at present. I'm not sure how this may go, I've used this particular plastic before from Gary on my 48 inch black "8" balls, and was able to get them inflated pretty firmly. As gary noted, this plastic seems to have a good tensile strength, and judging by the paces I've put the one "8" ball through, this seems to hold alot of water.....whoops, alot of air. ha ha.

                      So in relation to the pickle, my confidence is pretty good, but not totally certain if Gary's plastic is going to withstand such a large negative curve.

                      I've inflated some of the smaller 34 inch pickles very, very hard, and amazingly they have not sprung any leaks, so this is already telling me that the curve is too shalow to be of any concern. As of yesterday, I've just send some samples to China, and am asking Tinna to do an exact reverse engineer of the shape, and then just double the dimensions in all directions.

                      This means if I'm able to keep the exact shape, then the shape of the curve, plus the distribution of the pressure within should not be a problem. I'm of the understanding that the physics of air pressure within a shape is the same, no matter how large. The physics of pressure changes as soon as the shape is altered. Part of me just wants to make the curve a little more deeper, but feel this is where problems may be introduced. Just gonna stick with what has worked in the past.

                      My only doubt is though the shape is the same, with the shape being larger, meaning more volume of air, meaning more pressure, meaning more stress on the curve. I believe with the physics of pressure, this is what may be going on. I may ask Tinna if a reinforcement strip can be placed inside along that section, not sure if this will be possible with reverse seams.

                      Comment

                      • O'Dragon
                        Senior Member
                        • Jan 2024
                        • 298

                        @Big Thud Joe

                        Ah I see, that sounds interesting. Also what about the softness of the vinyl? More softer or firmer?

                        i dont know about the physics of air pressure but I guess given other inflatables have much sharper negative curves so id assume if they place a reinforcement strip on that part it Should hold.
                        also i read youre going dor reversed seams. Does that mean like a pinched seam but the pinches part is on the inside?
                        i have to admit i like the seams of the more expensive toys from Puffy Paws etc where they weld them all together. Such a seam would be awesome i guess for the negative curves wo you have a completely smooth surface to hump ☺️

                        Comment

                        • Big Thud Joe
                          Senior Member
                          • May 2017
                          • 407

                          If I could get welded seams, that would be fantastic, not sure if such options on low quantities are possible.

                          Keep in mind, total project cost is about AU$4,000. I'm getting 20 units made, so this will be AU$200.00 per unit, not sure if anyone is willing to pay that much. Probably if shape works successful, I may license design off for no fee to someone like Shosu or inflatableworld.de. They would have better contacts and more established lines then I would, thus possibly be able to do it cheaper for on sell.

                          I'm just doing this for myself, and honestly, not really sure if this custom design is going to stand up to how others hump these things. I'm not saying that's a bad thing, just I'm more of a grinder with the desired object on top of me, rather then a humper with it under neath. Engaging with something above allows me to be more versatile with how I'm interacting with it.

                          I think if it is a hit, and I pass it on to Shosu or inflatableworld.de, they'll probably will have to use much thicker plastic for this, so probably for humping probably looking at 0.25 to 0.30 with some back coating for strength. I'm currently using Gary's BLK13, 0.13mm thickness Black with slight translucency, and is shiny on both sides, and yes, it is very thin, very thin, even I was surprised when I got my first 48 inch "8" balls last year.

                          I love it when plastic is shiny both sides, even when not inflated, I get a real rock in my clothing when just shoving the uninflated inflatable under my pants and scrunching the PVC. It makes a loud squeaking sound, plus the feel of scrunching PVC to the thinness of paper literally and hormonally blows me up like a rocket. Sorry for the over detailed reply, just saying that I may have somewhat different preferences then most on here. I would feel uncomfortable selling something that is too thin for how others would use these.

                          Comment

                          • O'Dragon
                            Senior Member
                            • Jan 2024
                            • 298

                            Ahh I see, I wasnt aware its not necessarily meant for the general humping and the thin vinyl.
                            this could very possibly rip wuickly when an infla with that thickness gets humped.

                            But still keep us posted, as Im also thinking about making my own inflatable Im always curious how others are doing it.

                            Comment

                            • Loon_Rider_74
                              Junior Member
                              • Nov 2021
                              • 25

                              Picked up a couple things off my wishlist lately:

                              IW chipmunk
                              Play Day mega inflatable ride-camel
                              The new(er) intex inflatable beanless bag chair from Aldi - super comfy btw

                              Comment

                              • heaviest
                                Senior Member
                                • Jun 2018
                                • 914

                                I have way more than I need for the winter, but the Intex French Fry float, one of my favorites, was on sale so I bought even more of them. We don't actually pop many of these, so I'm just hoarding at this point.

                                Tear-drop shaped chairs, on sale. I've gotten lax about letting the larger ladies sit on these, so I need spares. Lots of spares. I got some bubble-furniture style ones, too.

                                30 inch intex transparent tubes. I think they stopped making these years ago, but I'm still finding them. Not cheap, but I want a very large number of these on hand for years to come. Hoarding, yes, but we do pop these. I NEED them, right? lol

                                Comment

                                Working...