Is it possible that an inflatable can have a defect inside of it that causes it to leak air slowly? I believe my intex fun island has one because it slowly deflates over like two days. It'll lose about a quarter of it's air in two days. Not exactly going completely flat, but still losing a pretty substantial amount of air over two days.
Internal leaks
Collapse
X
-
Tags: None
-
Re: Internal leaks
That is the telltale sign of a leak. I have an Intex beach ball with the same problem.
One thing you can do is inflate it full so it's under some pressure then put soap bubble or dishwashing solution on all the seams and look for bubbles. Probably too big to bring into a swimming pool and submerge watching for bubbles, but that's another way. Good luck. -
Re: Internal leaks
Again I believe the leak/hole Is inside the fun island. I have thoroughly checked for leaks on the outside of it, and have concluded that she must be deflating from two tiny leaks somewhere inside of her tubes. Is it possible that these are defects when Intex made her? She deflates extremely slowly at the moment, but my current girlfriend believes that over time the leaks could get larger and release her air quicker. I found a fluid designed to stop leaks in inflatable zodiacs when they develop internal leaks, but I am not completely sure it'll work or if it'll be very expensive.Washington State, United StatesComment
-
Re: Internal leaks
Leaks got larger, air is going out a lot quicker. Just going to do the usual. Ride her down. She's leaking a lot quicker.Washington State, United StatesComment
-
Re: Internal leaks
I can actually hear it deflating from the inside she is getting very soft alreadyWashington State, United StatesComment
-
Re: Internal leaks
Hey guys I bought two new beautiful higher end intex air mattresses, and both of them seem to have the beginning of the same internal defects-leaks, one of my 48" beach balls is doing it too. Is there a reason all of intexs inflatables are having issues the last few years. They either blow seams on the cheaper inflatables or have slow internal leaks on the more expensive ones, that progressively get worse. Is the the only way to keep my precious inflatables from completely popping on the inside is by letting some their air out and leaving them slightly deflated?Washington State, United StatesComment
-
Re: Internal leaks
There is no punctures on the outside of the inflatable. The leak is inside. Sometimes it goes out slow, other times it releases the air extremely quickly. The only thing I have found that might work for internal leaks is a zodiac boat sealant that's used for plugging leaks.Washington State, United StatesComment
-
Re: Internal leaks
Which leads to the next question. How small would the external air leak have to be, because it has to be tiny, because the air can not be felt or heard coming from the outside, but you can definitely feel the inflatable deflating through the leak and you can definitely hear air rushing out from the inside if you put your ear to it.Washington State, United StatesComment
-
Re: Internal leaks
If the valve isn't leaky- it's more likely to be either a small pin hole in a seam or just the air inside diffusing out through the vinyl. I know that sounds odd but vinyl is still porous ( full of microscopic holes), just usually air molecules are too big to escape through them though. If you filled an inflatable with helium it would soon deflate as vinyl can't withhold helium- same with helium in balloons too.Comment
Comment