Maintaining (not stretching) PVC?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    Maintaining (not stretching) PVC?

    Does a product exist that will help maintain the look of flexible PVC but without leaving a greasy film or residue? Many auto-based products will deepen shine and color but leave an undesirable feel. Thanks.
  • razo
    Junior Member
    • Feb 2021
    • 14

    #2
    Re: Maintaining (not stretching) PVC?

    You can buy something called "Sculpey Clay Softener". You can apply that on vinyl and leave it on for a few days and the vinyl will become soft. The draw back is that it can potentially weaken the seams so you have to be careful where you apply it.


    I would highly advise against using automotive products on your vinyl inflatables because a lot of those contain silicone that chemically react to vinyl. Using those will stiffen up the vinyl and make them brittle overtime. I had to learn the hard way.
    Last edited by razo; 23-08-2023, 16:21.

    Comment

    • playballrider
      Junior Member
      • Jul 2022
      • 10

      #3
      Re: Maintaining (not stretching) PVC?

      Anyone have an opinion on 303 Aerospace Protector? I use it for automotive uses since it doesn't give that "wet look" but does seem to actually protect plastics. I mostly use play balls and don't really have a need for a maintenance chemical.

      Comment

      • PVC Vinyl Enthusiast
        PVC Fetish
        • Jan 2013
        • 197

        #4
        Re: Maintaining (not stretching) PVC?

        From a chemical supplier or, failing that, Alibaba, you can get hold of a 1 kilogram or 1 litre bottle of DINP, which, as a phthalate-based plasticizer, gives superior results over any non-phthalate plasticizer.

        You can also get DINP from InflationResource, but they only accept Monero as payment:


        The non-phthalate plasticizers, such as DINCH, citrates (ATBC, etc), terephthalates, etc, simply do not give the same results as phthalates do: phthalates make the PVC very soft, gummy, elastic and squeaky. Whereas non-phthalates such as ATBC gives the inflatable a latex balloon-like texture: it improves softness to some extent, but it does not improve or maintain elasticity.

        Overlook the scaremongering and hysteria over phthalates: the High Molecular Weight class of phthalates, such as DINP and DIDP, have been declared Safe, following extensive scientific evaluations in the 1990s. The Low Molecular Weight class of phthalates, such as DEHP/DOP, were phased-out in the 1980s.

        DINP has been used as the plasticizer of choice in PVC for many years; do you recall that the inflatables of the 1990s and early 2000s were very soft, sticky, smooth and noisy (when I say noisy, I mean that the PVC material made a nice rustle or crackle when uninflated, while in the inflated state it was very squeaky).

        Apply a thin film of DINP (which has the consistency of an oily liquid) evenly over the PVC material. Preferably when the inflatable is under some tension (three quarters inflated). Allow time (days) for the DINP to permeate into the PVC. Assess the softness; if more softness is required, apply another thin layer of DINP. Allow days for the DINP to permeate into the PVC. Repeat until the desired softness is achieved.

        Avoid applying the DINP (or any type plasticizer, for that matter) directly to the seams, as it may weaken them.

        In terms of preventing the degradation of PVC, be it an inflatable or raincoat, avoid exposure to oils, including skin oils.You see, oils can permeate into the PVC and gradually displace the plasticizer from the PVC, resulting in the PVC becoming brittle. To keep PVC clean and free of oils, simply wash it in dilute lukewarm detergent solution (ordinary liquid dish soap or, as it is referred to in the UK, washing-up liquid or Fairy liquid). Then rinse with plenty of clean lukewarm water and allow to air-dry or blot dry with absorbent kitchen paper.

        I'd advise against applying any leather restorer or, for that matter, organic solvents or degreasers (alcohols, acetone, methyl ethyl ketone, dichloromethane, toluene, etc) as they can damage the PVC material. Or even dissolve the PVC and turn it into gloop! Or smudge and ruin the paint.

        Store PVC out of direct sun: solar UV can damage the PVC over time. Solar UV can also cause the paint/dyes to 'bleach' and fade.
        Last edited by PVC Vinyl Enthusiast; 23-08-2023, 22:47.
        Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

        Comment

        • Guest

          #5
          Re: Maintaining (not stretching) PVC?

          The 500 ml bottle of DINP arrived yesterday and I've applied it to one of the hoppers.

          Unlike ATBC, which worked slightly but noticeably on two and destroyed two more, this stuff instantly soaked in. Within minutes it made the surface duller but tackier and a bit softer to the touch. Now to let it soak.

          Now I know Sculpey was a waste, at least for heavier PVC.
          Last edited by Guest; 23-08-2023, 23:44.

          Comment

          • Guest

            #6
            Re: Maintaining (not stretching) PVC?

            Originally posted by PVC Vinyl Enthusiast
            From a chemical supplier or, failing that, Alibaba, you can get hold of a 1 kilogram or 1 litre bottle of DINP, which, as a phthalate-based plasticizer, gives superior results over any non-phthalate plasticizer.

            You can also get DINP from InflationResource, but they only accept Monero as payment:


            The non-phthalate plasticizers, such as DINCH, citrates (ATBC, etc), terephthalates, etc, simply do not give the same results as phthalates do: phthalates make the PVC very soft, gummy, elastic and squeaky. Whereas non-phthalates such as ATBC gives the inflatable a latex balloon-like texture: it improves softness to some extent, but it does not improve or maintain elasticity.

            Overlook the scaremongering and hysteria over phthalates: the High Molecular Weight class of phthalates, such as DINP and DIDP, have been declared Safe, following extensive scientific evaluations in the 1990s. The Low Molecular Weight class of phthalates, such as DEHP/DOP, were phased-out in the 1980s.

            DINP has been used as the plasticizer of choice in PVC for many years; do you recall that the inflatables of the 1990s and early 2000s were very soft, sticky, smooth and noisy (when I say noisy, I mean that the PVC material made a nice rustle or crackle when uninflated, while in the inflated state it was very squeaky).

            Apply a thin film of DINP (which has the consistency of an oily liquid) evenly over the PVC material. Preferably when the inflatable is under some tension (three quarters inflated). Allow time (days) for the DINP to permeate into the PVC. Assess the softness; if more softness is required, apply another thin layer of DINP. Allow days for the DINP to permeate into the PVC. Repeat until the desired softness is achieved.

            Avoid applying the DINP (or any type plasticizer, for that matter) directly to the seams, as it may weaken them.

            In terms of preventing the degradation of PVC, be it an inflatable or raincoat, avoid exposure to oils, including skin oils.You see, oils can permeate into the PVC and gradually displace the plasticizer from the PVC, resulting in the PVC becoming brittle. To keep PVC clean and free of oils, simply wash it in dilute lukewarm detergent solution (ordinary liquid dish soap or, as it is referred to in the UK, washing-up liquid or Fairy liquid). Then rinse with plenty of clean lukewarm water and allow to air-dry or blot dry with absorbent kitchen paper.

            I'd advise against applying any leather restorer or, for that matter, organic solvents or degreasers (alcohols, acetone, methyl ethyl ketone, dichloromethane, toluene, etc) as they can damage the PVC material. Or even dissolve the PVC and turn it into gloop! Or smudge and ruin the paint.

            Store PVC out of direct sun: solar UV can damage the PVC over time. Solar UV can also cause the paint/dyes to 'bleach' and fade.

            Excellent post, sir.

            Comment

            • PVC Vinyl Enthusiast
              PVC Fetish
              • Jan 2013
              • 197

              #7
              Re: Maintaining (not stretching) PVC?

              Originally posted by Merl
              The 500 ml bottle of DINP arrived yesterday and I've applied it to one of the hoppers.

              Unlike ATBC, which worked slightly but noticeably on two and destroyed two more, this stuff instantly soaked in. Within minutes it made the surface duller but tackier and a bit softer to the touch. Now to let it soak.

              Now I know Sculpey was a waste, at least for heavier PVC.
              The shine/gloss of the PVC should return once the DINP has fully absorbed into the polymer. The DINP will continue to absorb for as long as a week after initial application.
              Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

              Comment

              • Guest

                #8
                Re: Maintaining (not stretching) PVC?

                Thanks, I will assume it's ready to test out when the gloss returns... well it wasn't that shiny to begin with but now it's completely matte.

                Would you expect any problems applying it to something I already used ATBC on?

                Comment

                • PVC Vinyl Enthusiast
                  PVC Fetish
                  • Jan 2013
                  • 197

                  #9
                  Re: Maintaining (not stretching) PVC?

                  Originally posted by Merl
                  Thanks, I will assume it's ready to test out when the gloss returns... well it wasn't that shiny to begin with but now it's completely matte.

                  Would you expect any problems applying it to something I already used ATBC on?
                  I should not think so. In fact, it may eventually displace the ATBC. But it is still better not to have ATBC or other non-phthalate plasticizer applied previously. DINP would be more compatible with other previously-aplied phthalates, as they all have a similar chemical structure.
                  Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

                  Comment

                  Working...