Peanut balls. A "poorman's" ride roll

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Whale Rider
    Senior Member
    • Nov 2022
    • 531

    #16
    Re: Peanut balls. A "poorman's" ride roll

    Originally posted by Unicks
    @Whale Rider.. I originally ordered a full 10L jug through a friend in the polymer business, went a bit crazy over the last couple years with it. Next time I get some, I will buy extra and mention it here.. what kind of quantity are you looking for?

    U
    I would like to source a standard canister thats 10l it should not be empty after a year ^^ but I prefer not to send stuff around. so if its available in germany great but sending it from... i dont know guandong might be inconvenient ^^

    I have a few inflatables that need some softening... nd some SPHs that are in dire need of being softened...

    Comment

    • Guest

      #17
      Re: Peanut balls. A "poorman's" ride roll

      Can the peanut be carefully overinflated just enough to bulge out some of the saddle area? I like the idea of putting a latex band around an egg ball to use it as a Hopper because I'd be seated on its highest part. But the idea of doing that with a peanut, where I'd be sitting a little low in the saddle isn't quite working for me. Can they be bulged out, even a little?

      Or maybe it'll work as is...anyone willing to wrap a strap around a peanut and go for a ride?
      Last edited by Guest; 04-02-2023, 20:46.

      Comment

      • golopi
        Member
        • Nov 2022
        • 61

        #18
        Re: Peanut balls. A "poorman's" ride roll

        Originally posted by Merl
        Can the peanut be carefully overinflated just enough to bulge out some of the saddle area? I like the idea of putting a latex band around an egg ball to use it as a Hopper because I'd be seated on its highest part. But the idea of doing that with a peanut, where I'd be sitting a little low in the saddle isn't quite working for me. Can they be bulged out, even a little?

        Or maybe it'll work as is...anyone willing to wrap a strap around a peanut and go for a ride?
        They do take a bit of heat stretching although judging by my experience they don't tend to last unless you use some plasticizer. Atleast the cheaper ones. The first one i got popped on its own due to stretching and now the one i got recently did too ffs Not sure about the more expensive ones or the ATBC treated ones but i'll guess i have to get a shosu ride roll whenever.

        Comment

        • Unicks
          Senior Member
          • Nov 2020
          • 103

          #19
          Re: Peanut balls. A "poorman's" ride roll

          A plasticiser is essential with the cando ball material, they are already quite soft at rated size compared to others made in china claiming larger sizes. I've tried it all with these balls.. heat stretching will max out sooner than you think, this is how the ball was originally made. The vinyl is formulated to give a good resistance at rated size, after that, the vinyl begins to shred.. you can see it too, it just lacks a binder and something to maintain the structure as it expands. So I've found ATBC to work, but it takes weeks!

          I had one of the blue peanut balls from a couple years ago that I was a little heavy handed with the ATBC and it started to get real soft after months rolled by, I went to fill it more with the compressor and as it got bigger there were a couple of bubbles in the vinyl that made me nervous.. I left it at approximately 120% it's rated size and after a few days it went soft again but remained inflated.. well, that led to another bout with the compressor and my nerves. I would say it went to chest height at the saddle, the two spheres elongated and remained ovoid, the saddle portion was longer as well, but still had a noticeable reduction in girth. The plasticiser helped with the elasticity of the vinyl, cause when it popped, it was still ridably soft, it was'nt much firmer than it would have been at rated size. I think I mentioned it here before, but it was basically a balloon, it felt like a firm GL balloon.

          ..but then it finally popped after one too many overinflations, I have a couple replacements, but this time a lot less ATBC.. I think everyone whom has tried the stuff in quantity will say the same.. a little does a lot!

          U

          Comment

          • Guest

            #20
            Re: Peanut balls. A "poorman's" ride roll

            How much ATBC would you recommend for the Cando peanut? Do you wait to inflate it while it softens? Appreciate any details on your methods for softening the material Unicks.

            Comment

            • Unicks
              Senior Member
              • Nov 2020
              • 103

              #21
              Re: Peanut balls. A "poorman's" ride roll

              @frenchy I would recommend 100mL to start for the largest blue peanut, I have a red one which is the next size down and 60mL worked for it. You keep it inflated moderately during the process, just enough so you can move the plasticiser around inside without pooling for too long as that causes problems later on. It should take a day at room temperature for it all to absorb, just roll it around and massage it in periodically.

              Leave it for about a week, it will be noticeably softer but all the ATBC will be absorbed and you will smell it on the outside. You can now inflate it until it's firm, but not too much.. I've also found that heat does not help with ATBC. If you put a treated item in the cold, it seems to absorb faster when the temperature is cycled.

              When the item has that sticky appearance you're basically there.. it will have to be blown up to just under spec and left for a few days and then inflated the rest of the way. You will have to work the material by going for a few rides and you will notice the material really stretching and getting softer. If there wasn't any pooling of ATBC you will have a nice soft peanut ball without any bulges.. it's really a vinyl balloon, but extremely durable. The one I have can be well overinflated and returned to rated size without that heat-stretched memory.. if I store this item, it has to be in a poly bag by itself!

              Recomended things to try?.. shower with this thing! What an experience, a little imagination, soap and you're off! I've also treated one of their blue donut balls, It's become a bit of a shower toy as well.. like an overinflated car tube but feels like a geo balloon with a center that won't stretch out.. this vinyl formulation loves ATBC!

              Good luck!

              U

              Comment

              • Guest

                #22
                Re: Peanut balls. A "poorman's" ride roll

                Originally posted by Unicks
                I've also treated one of their blue donut balls
                If you wrap a strap around one side (as a handle) would it hold up to hopping around on it?

                Comment

                • Guest

                  #23
                  Re: Peanut balls. A "poorman's" ride roll

                  Thanks U !!!! I appreciate the help and will report back when I experiment.

                  Comment

                  • Guest

                    #24
                    Re: Peanut balls. A "poorman's" ride roll

                    Hi Unicks, what would you recommend for an amount of atbc for a CanDo 120cm exercise ball? I have a couple of them in various state of "worn-ness" so I'm thinking of treating a new 120cm with the atbc.

                    Comment

                    • Unicks
                      Senior Member
                      • Nov 2020
                      • 103

                      #25
                      Re: Peanut balls. A "poorman's" ride roll

                      @lopsided - It may be an issue if the balls you want to treat have any deep cuts or abrasions, if they do, the slice will swell and definitely fail at that point. Also, Cando vinyl becomes quite soft on their own after a few inflations and months.. but if it's already thin, try no more that 50-60ml of ATBC and move it around because it will absorb quite quickly.. if you don't, there will be thin or soft spots and it will effect the shape when fully inflated.

                      Good luck!

                      U

                      Comment

                      • Unicks
                        Senior Member
                        • Nov 2020
                        • 103

                        #26
                        Re: Peanut balls. A "poorman's" ride roll

                        @Merl - I think you could do that... but eventually the vinyl would stretch out and deform, possibly permanently. The blue donut I have has been inflated much larger than what the manufacturer suggests and ridden standing up without issue, you can feel when the vinyl begins to get tight that it's had enough.

                        U

                        Comment

                        • Guest

                          #27
                          Re: Peanut balls. A "poorman's" ride roll

                          Thank you for the response, can't wait to try it out. I have a lot more hope for the vinyl cando use compared to the stuff gymnic use. I've added 90ml of atbc to a gymnic 120cm in the past but that ball didn't seem to soften up a whole lot. Might have to add another 30-40ml to it and see what happens.

                          Comment

                          • Guest

                            #28
                            Re: Peanut balls. A "poorman's" ride roll

                            Originally posted by Unicks
                            @Merl - I think you could do that... but eventually the vinyl would stretch out and deform, possibly permanently. The blue donut I have has been inflated much larger than what the manufacturer suggests and ridden standing up without issue, you can feel when the vinyl begins to get tight that it's had enough.

                            U
                            Thanks. Gotta admit, the big blue one looks promising. Under $30, not a huge investment if it blows. I'll be sure to rotate it so it will stretch as evenly as possible.
                            Attached Files

                            Comment

                            • Guest

                              #29
                              Re: Peanut balls. A "poorman's" ride roll

                              I don't know if this is related to the discussion above.

                              TTR has a video of Ava riding a big inflatable heart, clearly pvc, but it's been "rubberized" and does behave exactly like a balloon. Is this a new type of material, or was it dosed with something?
                              Last edited by Guest; 23-03-2023, 00:48.

                              Comment

                              • golopi
                                Member
                                • Nov 2022
                                • 61

                                #30
                                Re: Peanut balls. A "poorman's" ride roll

                                Originally posted by Merl
                                I don't know if this is related to the discussion above.

                                TTR has a video of Ava riding a big inflatable heart, clearly pvc, but it's been "rubberized" and does behave exactly like a balloon. Is this a new type of material, or was it dosed with something?
                                That looks like it has been treated with a lot of ATBC vinyl softener. I treated one of my inflatable chairs with about 140ml of it and it became really soft too. Not as soft as the one in the video but pretty close. Sadly popped it by accident while inflating it the other day by the seam at the back because it was so soft and stretchy it was hard to tell when it had enough. You can find it in 80ml bottles with the name Cernit magic mix, should be enough for a couple smaller infalatables

                                Comment

                                Working...