I just acquired an inflatable mannequin ...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MegaInflator
    Senior Member
    • Oct 2019
    • 132

    I just acquired an inflatable mannequin ...

    .. actually intended for fashion displays and such, and thanks to shitty shipping it arrived overdue after I got my refund.

    Free is a great price.

    First impressions: inflation is a pain due to the safety flappers in the small valves (head is a separate chamber from the body and given the rather rough looking welds between the two I'm not inclined to single chamber it) but once I changed adapters on my pump (to one that actually pushed said flapper out of the way) it went fairly smooth.
    Deflation will be painful probably but I'll crosss that bridge when I get there.

    It's made from a fairly sturdy/stiff silver material with a satisfying pvc smell to it, and it inflated pretty taut without feeling strained or stressed; standing up it's ~165cm (5'5") tall, and for the ~20 euro it's listed for I think it's not a bad deal for a heatstretcher like me.

    Next test will be to see how much volume/curvature I can manage to add to this.
    Stay tuned.
  • MegaInflator
    Senior Member
    • Oct 2019
    • 132

    #2
    Re: I just acquired an inflatable mannequin ...

    Well the ansswer turned out to be "none" - upon inflating to stretch pressure I was greeted with seam failure.

    Next step will either be a discard or finding flexible pvc glue to reinforce all the seams. Sigh.

    Comment

    • heaviest
      Senior Member
      • Jun 2018
      • 914

      #3
      Re: I just acquired an inflatable mannequin ...

      That's unfortunate. I was looking forward to seeing that.

      I'd kinda like to find where those things are being used, sneak in overnight and enlarge them, and replace their clothing with something from the plus size department. That'd be quite a gag!

      Comment

      • MegaInflator
        Senior Member
        • Oct 2019
        • 132

        #4
        Re: I just acquired an inflatable mannequin ...

        Hah! That would be great!

        The only good news to come out of this is that my check valve functioned flawlesly.

        Comment

        • MegaInflator
          Senior Member
          • Oct 2019
          • 132

          #5
          Re: I just acquired an inflatable mannequin ...

          Update: I am sourcing some more; I got a decent deal, ordered a few of them; will proceed a bit different on these.

          Planning to buy some soft pvc glue to run a bead of glue on all the seams to reinforce them and -hopefully- prevent any ...premature ... failures.

          Might try and fix the original one as well - will try and update.

          Comment

          • MegaInflator
            Senior Member
            • Oct 2019
            • 132

            #6
            Re: I just acquired an inflatable mannequin ...

            Update: the package came in.

            I am leaving the new ones packed up while I try to fix a variety of seam/pinhole leaks on the first one; the material is great, but seam quality is absolutely atrocious; and there's A LOT of them.

            Running glue beads over them (for sealing/reinforcement) is pretty laborious; I'm kind of in the "what the hell did I get myself into" phase right now ...

            Comment

            • Whale Rider
              Senior Member
              • Nov 2022
              • 531

              #7
              Re: I just acquired an inflatable mannequin ...

              Originally posted by MegaInflator
              Update: the package came in.

              I am leaving the new ones packed up while I try to fix a variety of seam/pinhole leaks on the first one; the material is great, but seam quality is absolutely atrocious; and there's A LOT of them.

              Running glue beads over them (for sealing/reinforcement) is pretty laborious; I'm kind of in the "what the hell did I get myself into" phase right now ...
              aint running a line of glue over them enough?

              Comment

              • MegaInflator
                Senior Member
                • Oct 2019
                • 132

                #8
                Re: I just acquired an inflatable mannequin ...

                Originally posted by Whale Rider
                aint running a line of glue over them enough?
                That's exactly what I am doing, and it's still a laborious, slow task because there's A LOT of seams to do.

                Comment

                • Whale Rider
                  Senior Member
                  • Nov 2022
                  • 531

                  #9
                  Re: I just acquired an inflatable mannequin ...

                  Originally posted by MegaInflator
                  That's exactly what I am doing, and it's still a laborious, slow task because there's A LOT of seams to do.
                  maybe for doing while watching the boys or the expanse ^^

                  Comment

                  • MegaInflator
                    Senior Member
                    • Oct 2019
                    • 132

                    #10
                    Re: I just acquired an inflatable mannequin ...

                    I spent more time going over seams and construction and I think the whole idea is a nonstarter.

                    There's so many potential failure points and the construction quality is at best shoddy and at worst barely airtight ... I don't think much will come of it.

                    I will give it a fair go (going to at least fix the first one, I think I still have a seam pinhole on an arm) but warm water stretching seems nonviable. Steam/boiling water might work but I have really bad experiences with boiling water, and no access to the steam option.

                    Comment

                    • MegaInflator
                      Senior Member
                      • Oct 2019
                      • 132

                      #11
                      Re: I just acquired an inflatable mannequin ...

                      I am happy to report my previous post was based on 2 bad samples, both with pinholes from the factory.

                      The third inflated fine, held air good and even went to stretch pressure without problems.
                      (and got pretty thicc)

                      The other two didn't need a full seam job, just some attention at the pinholes; both are holding air fine right now.

                      (Basically I was like "well if I can't stretch I can at least see how big they get before a seam lets go" - I was surprised to find one that held fine; the other new one had a pinhole at the waist that was easily fixed)

                      Cons:
                      - Featureless
                      - Shoddy quality
                      - Fairly limited stretch potential due to small panel sizes and so many seams

                      Pro's:
                      + Decent shape and size
                      + Not very expensive (full body is around ~18-20EU on Amazon Marketplace)
                      + Leaks tend to be seam pinholes which a dab of the proper glue will easily fix.

                      For the record: I don't use patches to fix, I will just put a small puddle of soft pvc over the pinhole area and let it set. The glue I use is flexible and holds well (butanone based)
                      and patches would just create new stress areas (plus they're hard to get flat over seams)

                      Overall: Yes it's more work but I'm not dissatisfied with the results.
                      Last edited by MegaInflator; 26-02-2023, 07:48. Reason: Spelling

                      Comment

                      Working...