Hey bought an adorable 48" Beach ball but it is slow leaking and I have checked the seams it seems to be leaking from the valve, it seems internal is there a way to repair it, or is it always going to leak out?
How to fix a leaky valve
Collapse
X
-
Tags: None
-
Re: How to fix a leaky valve
It is coming from inside the inflatable, like an defect. You blow them up super firm and over like an hour they start to get soft again, so their losing some air pressure. Funny thing is I have seen this in both new and older inflatables. I don't know if it is faulty valves or faulty seams, but they're certainly leaking from the inside because you can not hear the air leaking out. Let me know your thoughts. Thanks Jkloon.Washington State, United StatesComment
-
Re: How to fix a leaky valve
I'm not sure what you mean by an internal leak on a beachball which only has one chamber....with a Lilo or inflatable boat which have several air chambers then the air could leak from one part of the item to another but as one part goes soft another should get harder.
One way to find a slow leak in an item is to blow it up really hard which puts a strain on any weak point but of course there is the risk of damage which could be hard to repair if it causes a major burst.Comment
-
Re: How to fix a leaky valve
Actually I think what's probably happening is he's blowing warm air into the inflatable, and then as that air cools down and the air shrinks in volume, the inflatable is very slightly deflated because the air is taking up less space.
Combine that with a very slight leak because no valve is perfect, and you have the effect he is describing.Comment
-
Re: How to fix a leaky valve
what about trying to push it down into your tub, fill your tub half way, and put the valve in the water sticking out and push down on the ball. you may want to inflate it to right before tight so it can fit into the tub then you pushing down on it should be enough pressure to see if valve leaks, because it can only leak out somewhere, somewhere you should see itty bitty bubbles when you force down into the water, so after you check valves you might be able to check the seems too. Also please be very careful with wet slippery to do this pushing down with your upper body should be plenty don't try to sit on it on the tub, you just need to push it just under water enough to check sections of it at a time.
And if it is just a valve problem wouldn't putting a bit of plastic wrap when pushing the plug in help seal it.Comment
Comment