Originally posted by RLMI
Inflatables blown super tight or till they pop
Collapse
X
-
RLM by all these awesome stories, I think you should try and get a job there! you and others on this thread as well, love mouth inflation, so this would be a fun job to have!🥰 1😎 1 -
Haha, these stacks of pooltoys are really hilarous. I would definitely love to apply for a job there, just to blow these inflatables everyday until they are super tight
But I'm afraid at the same time that it would too often end up like this one: 
B2P-swimring-violet-088.jpg B2P-swimring-violet-086.jpg B2P-swimring-violet-100.jpg B2P-swimring-violet-120.jpg B2P-swimring-violet-123.jpg
Bye, Marvin🥰 5Comment
-
HeavenOriginally posted by RLMIAnother heavily overinflated set of pooltoys at another shop, equally tightly blown.👍 2Comment
-
One time I was lucky to have one whole summer season at the lake Balaton in Hungary (EU). This lake is quite shallow especially there where I was (at an average abou 1-1,5m - 3-4ft). Which is not well suited for swimming, but that better for classic beach activities, which involves a lot of pool toys. Literally every single group of people at the beach had at least 2-3 pool toys. And there was a little shop directly at the beach where they could get these. Well as you might guess, all of their toys were overinflated. In the shop worked a pretty, young woman (probably a student on her summer work) so on one day I thought, why not to ask her a few questions. I went in and tried to talk to her, but unfortunately she was quite rude (with all customers) and absolutely not open for small talks. But as I could find out, her boss told her how to inflate the toys: with an air compressor (because it is fast) and until the wrinkles disappear. For the question 'why so much', she answered 'because if she wouldn't inflate so much, the customers would complain about the toys floating capabilities and stability'. And one more info I could get out of her, that no toys popped by the inflation since she works there.
By the way, I found that (at least) in the EU it is strictly prohibited of hygenical reasons to inflate toys for the customers by mouth.
Since I was at the beach almost every day for almost 2 month, I could follow the history of some toys, which the people bought in the shop. And it turned out, that in many cases these overinflated toys popped within a few day. And almost all of them with a partial or full seam split. On one day I had one of my greates experience by seeing (and hearing) a swim ring popping under a young couple while having fun in water. They were near to me, and they bought that ring a few day before in the shop. The girl was sitting in the ring her boyfriend just pushed her towards the water. No big stress, no sharp objects just a sudden 'boom': inner seam split. The girl was quite surprized.
What I wanted to say: I understand now, why the shops overinflate the toys so much. And I also saw the result: they toys may hold a few days (because they are brand new), but most of them will pop in a few day. But the shops doesn't case. The customers will buy a new one and the responsible for the mishap are the cheap toys.Comment
-
The toys in these shops at the beach are quite a bit overpriced. I better take my own toys with me, including ones that I had to repair. These toys are not just a lifeless shred of vinyl but something that can be enjoyed in various ways, including... well, "that". This is why I repair them as long as possible.One time I was lucky to have one whole summer season at the lake Balaton in Hungary (EU). This lake is quite shallow especially there where I was (at an average abou 1-1,5m - 3-4ft). Which is not well suited for swimming, but that better for classic beach activities, which involves a lot of pool toys. Literally every single group of people at the beach had at least 2-3 pool toys. And there was a little shop directly at the beach where they could get these. Well as you might guess, all of their toys were overinflated. In the shop worked a pretty, young woman (probably a student on her summer work) so on one day I thought, why not to ask her a few questions. I went in and tried to talk to her, but unfortunately she was quite rude (with all customers) and absolutely not open for small talks. But as I could find out, her boss told her how to inflate the toys: with an air compressor (because it is fast) and until the wrinkles disappear. For the question 'why so much', she answered 'because if she wouldn't inflate so much, the customers would complain about the toys floating capabilities and stability'. And one more info I could get out of her, that no toys popped by the inflation since she works there.
By the way, I found that (at least) in the EU it is strictly prohibited of hygenical reasons to inflate toys for the customers by mouth.
Since I was at the beach almost every day for almost 2 month, I could follow the history of some toys, which the people bought in the shop. And it turned out, that in many cases these overinflated toys popped within a few day. And almost all of them with a partial or full seam split. On one day I had one of my greates experience by seeing (and hearing) a swim ring popping under a young couple while having fun in water. They were near to me, and they bought that ring a few day before in the shop. The girl was sitting in the ring her boyfriend just pushed her towards the water. No big stress, no sharp objects just a sudden 'boom': inner seam split. The girl was quite surprized.
What I wanted to say: I understand now, why the shops overinflate the toys so much. And I also saw the result: they toys may hold a few days (because they are brand new), but most of them will pop in a few day. But the shops doesn't case. The customers will buy a new one and the responsible for the mishap are the cheap toys.
For that money (or more), I buy a better toy or at least one which is good but rare or scarce even in Europe. Once I overheard people talking about that I had the best air mattress available on the market with me. (It definitely is a good one, yes, and it was not cheap at all. The shop where I bought it turned out to be a caravan service with good contacts with German companies and this is why they had that mattress.)
The IW seal would certainly cause an eclat if I used it at the beach but first, it is a super comfy lounger, second, I even have already taken my skunk with me and used it as a lounger too. (Well, I quickly became "the man with the skunk"...)
(The skunk has another advantage: it is super easy to deflate when I go to the water for the last time while it's deflating: it collapses under its own weight and can then be folded in no time while the seal takes quite a lot more time to deflate.)👍 1Comment
-
Cool! have you seen much of mouth inflation by female pool toy owners too?One time I was lucky to have one whole summer season at the lake Balaton in Hungary (EU). This lake is quite shallow especially there where I was (at an average abou 1-1,5m - 3-4ft). Which is not well suited for swimming, but that better for classic beach activities, which involves a lot of pool toys. Literally every single group of people at the beach had at least 2-3 pool toys
Comment
-
I had some really well used air matresses, the oldest of which i bought in 2011. All three had been patched a number of times before. Recently when the family was out traveling, i suddenly understood that these devices were ideal candidates for blowing to pop. So here we go).
Not all the overinflations are taken pictures of. The main sections of 18-pocket mattresses popped too easily. I patched them couple of times with builder sticky tape (the toughest one for quick patches on vinyl, by the way), but i don't have as much of it as for 10+ of those pockets). So i ditched blowing into the main sections and focused my effort on the pillows. The silver one's pillow baffles did not sustain and went PANG after a while, so the pillow got huge in the end!
IMG_20260528_212647399.jpg IMG_20260528_212801263.jpg IMG_20260529_084019660.jpg IMG_20260528_213818125_AE.jpg IMG_20260529_083932112_HDR_AE.jpg🥰 3👍 3Comment
-
More. And look how the valves got oval from overinflation).
IMG_20260531_012511543.jpg IMG_20260531_012428884_AE.jpg IMG_20260531_090851582_HDR_AE.jpg IMG_20260531_094137655_AE.jpg IMG_20260531_012325694_HDR_AE.jpg🥰 6👍 1Comment
-
Wow! Just wow! The bulging pillow is one of a kind. I have a similar pool bed with me, now your pictures finally moved me to do a b2p. Great job! Congratulations!I had some really well used air matresses, the oldest of which i bought in 2011. All three had been patched a number of times before. Recently when the family was out traveling, i suddenly understood that these devices were ideal candidates for blowing to pop. So here we go).
Not all the overinflations are taken pictures of. The main sections of 18-pocket mattresses popped too easily. I patched them couple of times with builder sticky tape (the toughest one for quick patches on vinyl, by the way), but i don't have as much of it as for 10+ of those pockets). So i ditched blowing into the main sections and focused my effort on the pillows. The silver one's pillow baffles did not sustain and went PANG after a while, so the pillow got huge in the end!
IMG_20260528_212647399.jpg IMG_20260528_212801263.jpg IMG_20260529_084019660.jpg IMG_20260528_213818125_AE.jpg IMG_20260529_083932112_HDR_AE.jpg😎 2Comment
-
Sometimes you can see mothers blowing up smaller inflatables for their kids. But like pretty, younger girls blowing up their toys, that's rare. Mostly because these kind of girls have boyfriends, who does it for them.Comment
-
I love your pictures. Do you have somewhere more like these?More. And look how the valves got oval from overinflation).
IMG_20260531_012511543.jpg IMG_20260531_012428884_AE.jpg IMG_20260531_090851582_HDR_AE.jpg IMG_20260531_094137655_AE.jpg IMG_20260531_012325694_HDR_AE.jpgComment
-
Might have gotten carried away....Attached FilesYou do not have permission to view this gallery.
This gallery has 1 photos.🥰 4Comment
-
👍 1Comment
-
👍 1Comment
-
Do you have more pics of them?
Comment