Inflatables blown super tight or till they pop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    One of my friends was casually asking where she could buy "tube floats" for her kids' pool party, so of course I said I know a shop that always has plenty in stock, and they're even inflated for you.

    We headed down and there were lots of different designs, all blown up really big and tight, as they always do. Most tended to be between 20 inch and 24 inch, which suited our needs perfectly.
    Shop display .jpg
    Display 2.jpg

    My friend said she'd prefer to buy them uninflated, new in the packaging, in order to save space, as they didn't need the floats till the afternoon. She also didn't want to worry about germs from saliva on the mouthpiece, on a pre-blown pooltoy.

    We asked the shop assistant if she had uninflated swim rings, and she seemed surprised that we wanted the rings uninflated. We explained it was to save space as we didn't need them right away, and she seemed placated. She asked what colours and sizes we wanted, and my friend picked 7 swim rings in total.

    Later that afternoon, we needed to start filling the swim rings with air, in order for them to be any use at a pool party. I asked my friend if she had a foot pump or hand pump, to which she said no, and that she'd just use her mouth to blow up the rings. She proceeded to mouth inflate 5 rings, all quite tight, almost wrinkle free. They were overinflated just to the point of becoming dangerous. She seemed to naturally fill them up to this plump size, and had no problems with the actual inflating and exhalation of air from her lungs. I mentioned something about how she was blowing the rings quite full and firm, and she said she liked to have them hard and solid, so that they kept their shape and supported the user better in the water. She also said that adding extra air into them meant that it was less likely for a random person to place their mouth on the valve and try to top up the air. With that, it reminded her to wipe down all the mouthpieces she'd had placed in her mouth while blowing up those swim rings.

    Rings for pool.jpg

    There were 2 more rings left, so I said I'd help her blow those up, if she didn't mind me using my mouth and filling the 2 remaining rings with my breath. She was fine, so I started blowing up a brown printed ring. It was quite stretchy and easily reached a plump, thick size with no wrinkles. Satisfied with the hardness, I plugged the valve and began blowing up a pink and clear ring with patterns. I wanted to blow it to the absolute maximum, to see how it would get - hoping it wouldn't burst - especially since the other rings were also blown up tight. I managed to get it to this size below, and we put it in the car, and were on our way.
    Pink 1.jpg

    Whilst it wasn't warm, the vinyl still must have stretched, as it lost a bit of its glassy hardness within 15 minutes. I prayed it wasn't a leak, and managed to blow 7 more big breaths into it, and it didn't burst. It was trully swollen and colossal, so I decided to stop, as it was rock hard to the touch.

    This is what it looked like at the end of the blowing.
    Pink 2.jpg
    My friend was quite surprised by its overtly swollen shape, and said it looked like a bubble. I really hoped it wouldn't explode any moment, and fortunately it held air. That's probably the riskiest, tightest swim ring I've ever mouth blown. I made sure I wiped off the mouthpieces too, as, out of instinct, after finishing blowing it up and closing the valve, I was pressing the vinyl against my mouth to feel the hardness.
    Last edited by Guest; 03-04-2025, 20:36.

    Comment

    • georgebayer_1
      Senior Member
      • Jan 2015
      • 197

      Wow, that's fantastic You and your friend must have a lot of fun when inflating your rings to such balloons

      Comment

      • Guest

        Originally posted by georgebayer_1
        Wow, that's fantastic You and your friend must have a lot of fun when inflating your rings to such balloons
        I think I had the most fun, but she just took it quite normally with no element of excitement! She does possess very ample lung strength though.

        Comment

        • puffy cheeks
          inflatable lover
          • Nov 2013
          • 243

          I blew and and used my SPH ball the other day and I decided to make it rock hard, but it seams it can't take that much stress. it gets firm but you are still able to squeeze it a little. also wasn't terribly hard to get more air into it either. so as I continued blowing it got a seam leak, which I patched with some gorilla tape. guess those balls aren't up for that type of stress

          Comment

          • Kurtz
            Junior Member
            • Jan 2023
            • 9

            When it comes to exercise balls, I have no mercy when inflating it. I love them super tight, always overinflated. Sometimes they stop being round from overinflation. They are very durable, and I have never had one explode, even with 2 people jumping at the same time, on an overinflated children's sized ball. They can be so tightthat they practically do not bend when sitting and therefore you cannot jump on them, but in this case Tighter means better.

            Comment

            • Guest

              I am in awe of how tightly this shop inflates every swim ring for sale. All are blown to such a huge size, wrinkle free, bulging, warping and ballooning outward, looking like they could burst any moment, stretched thin like balloons.

              When I bought a swim ring that was super tightly inflated like this, I opened the valve, put it in my mouth and tried to blow more air into it, but it was so full, I actually barely got any more air in. So strong was the resistance. Especially for the double chamber rings, where they are already very tight while there are still some wrinkles. I dare not keep pushing till the wrinkles go away, like the staff at this shop do.

              I wonder how many rings actually explode while being blown up, and also, whether the staff all need to have very strong lung strength. Seldom see pumps in use...must be easier, quicker and more fun to blow them up with their mouths.
              Shop blue tightly blown1.jpg Shop Red Tight1.jpg Shop pink tightly blown 2.jpg Shop yellow tight1.jpg Overinflated shop rings on sale.jpg

              Comment

              • Guest


                A neighbour a few doors away had these pooltoys to give away. She messaged a few neighbours to see if anyone wanted them. There were a couple of rafts, beachballs and a few more rings. Not to be greedy, I only took 3 rings and 1 smiley face beachball, as they seemed the tightest and most fully blown up.

                All were already blown up tightly and I did not have to add any air. The ball is nicely distended and round, not hexagonal any more, as the panels have enough air inside to stretch them out. The rings are hard with air, inflated thick and fat, and have no wrinkles at all. The blue one and yellow one have been overinflated to the point where they're warping and bulging up on one side, as seen when we used them in the pool. Surprisingly they haven't leaked and held air pressure perfectly, maintaining their tightness too, which shows that the vinyl has stretched out fully.

                As I thanked her for the ball and rings, I just casually asked if they were hard to blow up, and she said, 'Oh no, not at all, super easy, just use your mouth and it only takes a minute. Keep blowing air into them until you can't blow any more air in, that's when you know it's full up.'


                20250421_202509.jpg 20250421_202455.jpg Blue .jpg Yellow .jpg Donut big.jpg
                Last edited by Guest; 04-05-2025, 07:59.

                Comment

                • john plavsredstvov
                  Member
                  • Apr 2025
                  • 87

                  472_1911725626.jpg
                  Excuse me for a picture of Flat devices in this topic, but look at the transparent pillow section of the mattress on the left. It should be extremely lucky it didn't explode last time it was inflated And what a contrast to the mattress on the right!
                  This is taken from a private sales website, the seller wrote the right one is as good as new.

                  Comment

                  • globohidro678
                    Junior Member
                    • May 2025
                    • 17

                    There was someone in Europe who using a compressor to overfill vinyl inflatables, and I recall a pool tool style life jacket that must have doubled in size and looked ready to explode - absolutely amazing. I'd love to help a lovely lady put that vest on uninflated and then slowly inflate from a gas cylinder until ready to burst and tightly containing her.
                    Last edited by globohidro678; 07-05-2025, 11:12.

                    Comment

                    • inbox_pm
                      Senior Member
                      • Apr 2017
                      • 189

                      Originally posted by john plavsredstvov
                      472_1911725626.jpg
                      Excuse me for a picture of Flat devices in this topic, but look at the transparent pillow section of the mattress on the left. It should be extremely lucky it didn't explode last time it was inflated And what a contrast to the mattress on the right!
                      This is taken from a private sales website, the seller wrote the right one is as good as new.
                      Would be interesting to see them inflated

                      Comment

                      • Guest

                        Shop.jpg More tightly blown floats at the poolside shop for sale. All were fully swelled up with air and really tight and hard.

                        Through the day, the rings got soft from stretching in the sun and people would add a few more breaths without thinking, to firm them up again.

                        A lot seemed to leak from overpressure after a while unfortunately. The last picture shows an inflation station where the swim rings being pumped up were all being blown up way too big, and more than 50% began to leak, while inflating, or shortly after, from simply being pumped up too much! You'd hope they stop blowing them up so big.

                        Pink yellow.jpg Donut .jpg Leaky.jpg
                        Last edited by Guest; 09-05-2025, 11:24.

                        Comment

                        • Seasidelad
                          Senior Member
                          • Sep 2018
                          • 303

                          Originally posted by globohidro678
                          There was someone in Europe who using a compressor to overfill vinyl inflatables, and I recall a pool tool style life jacket that must have doubled in size and looked ready to explode - absolutely amazing. I'd love to help a lovely lady put that vest on uninflated and then slowly inflate from a gas cylinder until ready to burst and tightly containing her.
                          If it was the same guy I used to watch he often used a compressor the steam filled to heatstretch them was impressive to see how big an inflatable could go before it would go boom. The chanel ha s since disapeared. I love to heatstretch inflatables but not as far as that guy went I want them to last longer.

                          Comment

                          • Seasidelad
                            Senior Member
                            • Sep 2018
                            • 303

                            Originally posted by inbox_pm

                            Would be interesting to see them inflated
                            I would love to find the one on the left laying on a beach somewhere

                            Comment

                            • globohidro678
                              Junior Member
                              • May 2025
                              • 17

                              Originally posted by Seasidelad

                              If it was the same guy I used to watch he often used a compressor the steam filled to heatstretch them was impressive to see how big an inflatable could go before it would go boom. The chanel ha s since disapeared. I love to heatstretch inflatables but not as far as that guy went I want them to last longer.
                              I'd prefer them inflated like balloons until they are fragile and just about to pop .... still love the idea of putting the life vest on a lovely lady and inflating it while she is wearing it, preferably from a gas cylinder like a balloon rather than with a compressor. I recall once inflating a swim ring with a helium tank and it stretched so much that the girls at the beach house could barely get into it and it stayed that way for days. It was also incredibly light.

                              Comment

                              • snh61
                                Senior Member
                                • Sep 2017
                                • 133

                                today i brought home a Sevylor TAHITI PLUS kayak boat, to play with and of course, overinflate. On the print it says 0.9 PSI. So, first try, floor inflated to 4 PSI and the side 2.5 PSI. Floor pressure later decreased to about 3 PSI, as it stretched and settled, and the sides got to about 1.5. Surprised the sides took so much, as there is a butt seam the whole length. The vinyl is pretty thicks and seams seem to be done very well. Sides at 2.5PSI were pretty damn solid. Not really rock hard, but solid. Later i will try again and report back, maybe with some photos too.

                                Comment

                                Working...