Inflatables blown super tight or till they pop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • puffy cheeks
    inflatable lover
    • Nov 2013
    • 243

    Originally posted by RLMI

    No I left it there, I didn't take it!
    oh ok then neverminso lol so it popped while you were there then huh. that's pretty cool! how long did it last like that till it popped?

    Comment

    • puffy cheeks
      inflatable lover
      • Nov 2013
      • 243

      I love it when inflatables are fully inflated like on the box they come in. to me it's more inviting and shows that you are really ready to play with and care about your inflatable if it's blown nice and tight. I believe no one would want to play with an underinflated pool toy

      Comment

      • Guest

        Originally posted by puffy cheeks

        oh ok then neverminso lol so it popped while you were there then huh. that's pretty cool! how long did it last like that till it popped?
        Luckily it didn't pop. The owners let the air out so it could fit in their bag. They came back for it!

        Comment

        • Guest

          A few years ago they had these decorative arches for a Slide the City event, which comprised of hundreds of tightly filled rings. Some have even already started deflating, such is the size they blew them up till.
          FB_IMG_1731193197171.jpg FB_IMG_1731193224553.jpg FB_IMG_1731193258048.jpg

          Comment

          • Guest

            16.jpg 13.jpg 11.jpg 12.jpg

            Some more tightly blown rings at a local shop. In the pic with the rainbow ring, you can see a few leaky deflated rings behind it. No surprise, seeing how gigantic and swollen, the shop staff were filling the rings.

            Caught a glimpse of the Pink ring being blown up by mouth. This young shop assistant kept blowing air into it, even straining and heaving to force more air in, pushing her lips against the vinyl, till the ring was a good 40% bigger than rated size, and of course, becoming very fat, swollen and warping. The side near the mouthpiece had ballooned outwards visibly, really stretching from the pressure. Luckily she stopped, or an explosion may have followed before too long.

            I think she had sprayed a bit of moisture during inflation, as she audibly sucked back the saliva as she took the valve out of her mouth, then used her shirt to wipe the mouthpiece dry!

            Wonder why she was blowing it up so dangerously big?

            Comment

            • heaviest
              Senior Member
              • Jun 2018
              • 914

              Originally posted by RLMI
              A few years ago they had these decorative arches for a Slide the City event, which comprised of hundreds of tightly filled rings. Some have even already started deflating, such is the size they blew them up till.
              FB_IMG_1731193197171.jpg FB_IMG_1731193224553.jpg FB_IMG_1731193258048.jpg
              The thing about Slide The City is their rings were nothing special. Just pool-grade tubes. and people brought their own, too. There used to be a lot more pictures online but you can still find pictures of people sliding on Intex rings, air mattresses, pizza slices, and even whales.

              It's enough water to be slippery but not nearly enough to float, so people were jumping on and laying on pool-grade rings, on the damned street. I find that pretty exciting.

              Comment

              • Slow DeFlaite
                Senior Member
                • Apr 2023
                • 314

                Originally posted by Loonerboy510
                Re: Inflatables blown super tight or till they pop

                I especially love when a seam gives up and the air slowly comes out mid way through inflation
                I was airing up a "48 clear intex beachball with my pump one time just to see how big I could get it up. It was rock hard when the seam around the circle in the bottom started leaking. The hole was tiny and the ball had so much air in it I wasn't going to waste it. I forced the tip of my twink into the hole and entered the ball until the hole was tightly stretched around my twink. I fucked that beachball rotten till I dropped a pint of cum inside it!

                Comment

                • Seasidelad
                  Senior Member
                  • Sep 2018
                  • 303

                  Originally posted by Slow DeFlaite

                  I was airing up a "48 clear intex beachball with my pump one time just to see how big I could get it up. It was rock hard when the seam around the circle in the bottom started leaking. The hole was tiny and the ball had so much air in it I wasn't going to waste it. I forced the tip of my twink into the hole and entered the ball until the hole was tightly stretched around my twink. I fucked that beachball rotten till I dropped a pint of cum inside it!

                  Great idea did you keep the ball and patch the hole?

                  Comment

                  • Slow DeFlaite
                    Senior Member
                    • Apr 2023
                    • 314

                    Originally posted by Seasidelad


                    Great idea did you keep the ball and patch the hole?
                    I tried but the tape wouldn't hold.

                    Comment

                    • heaviest
                      Senior Member
                      • Jun 2018
                      • 914

                      Originally posted by Slow DeFlaite

                      I tried but the tape wouldn't hold.
                      The kind of hole you describe is repairable with a piece of donor vinyl and some vinyl cement. Cut a circle of vinyl from a donor, about the size of your finger tip, lightly inflate the beach ball so there is slack but still shape enough to push against, put vinyl cement over the hole and put the patch on. Lightly press it flat, going outward from the center of the patch with your fingernail, until the vinyl hardens enough that it stays flat. Takes a few minutes, then let it sit overnight. You could probably also do this while the ball is completely flat.

                      A ball that has been repairs like this is really cool. It's like it has battle scars.

                      Comment

                      • Slow DeFlaite
                        Senior Member
                        • Apr 2023
                        • 314

                        Originally posted by heaviest

                        The kind of hole you describe is repairable with a piece of donor vinyl and some vinyl cement. Cut a circle of vinyl from a donor, about the size of your finger tip, lightly inflate the beach ball so there is slack but still shape enough to push against, put vinyl cement over the hole and put the patch on. Lightly press it flat, going outward from the center of the patch with your fingernail, until the vinyl hardens enough that it stays flat. Takes a few minutes, then let it sit overnight. You could probably also do this while the ball is completely flat.

                        A ball that has been repairs like this is really cool. It's like it has battle scars.
                        I L♡VE "Battlescares" from abuse!! I had an NFL Inflatable football one time that was "48+. A bar owner on my paper route gave it to me one day after football season was over. I couldn't wait to get it home to my bedroom for some hijinks. I aired it up Nice tight & plump but the instant I mounted it It sprang a leak at the seam and started going down too fast it Cock blocked my orgasm! The vinyl was real soft and brittle & would crack easy.
                        I got some model airplane 2 part epoxy glue and glued the seam up air tight. I got Blue Balls the entire time I was fixing it in anticipation of riding it again with all that air inside it. I waited 1 day for the glue to dry & aired it back up. It didn't leak. I mounted the ball and instantly started blowing my nuts off on it then.....PSSSHEWWW! The glue failed and was totally coming apart from the vinyl. I came like hot butter all over it until I rode it down flat on the floor! I left it cum drenched on a towel until my mom finally came in & threw it away.

                        Comment

                        • Guest

                          Saw this pile of heavily overinflated tubes. I am amazed how some were blown up until the outer seam became completely smooth and flush, with no wrinkles or ripples at all.

                          I would be too afraid to push my luck that far. The vinyl is so springy and tight to the point it is solid and hard! Can't ascertain if these were mouth blown or pumped.

                          Comment

                          • puffy cheeks
                            inflatable lover
                            • Nov 2013
                            • 243

                            Originally posted by RLMI
                            Saw this pile of heavily overinflated tubes. I am amazed how some were blown up until the outer seam became completely smooth and flush, with no wrinkles or ripples at all.

                            I would be too afraid to push my luck that far. The vinyl is so springy and tight to the point it is solid and hard! Can't ascertain if these were mouth blown or pumped.
                            holy cow that is a rare site! looks beautiful though. I could sit back and admire them

                            Comment

                            • zycram
                              Senior Member
                              • Nov 2024
                              • 408

                              Originally posted by georgebayer_1
                              Re: Inflatables blown super tight or till they pop

                              I do it the same way. Overinflate it hard and then ride, squeeze or just touch. But the overinflating is also exciting for me, I like the feeling how the inflatable grows and get harder after each breath.
                              If a toy is firm and tight I find it more exciting at first sight. But when riding it, I like it most when it is a bit softer so that I can bounce on the toy and even sink into it a bit. As for my Intex whale, for example, I tried inflating it rock hard and playing with/riding it but when riding, it was not as good as just looking at the firmly inflated toy. As soon as I began to get hard by just watching it, I hugged the toy, then laid myself onto it, then immediately opened the valve, enjoyed the hissing sound, and, as soon as the toy was still bouncy but not too soft, I closed it again, all while sinking into it. This felt _awesome_, of course, my cock becoming rock hard, and after a few minutes of moving back and forth, I shot my load.

                              It really depends on the toy, but in the case of an Intex dolphin or whale, I mostly hug it from below when I decide to inflate it rock hard. Or I put one side of my firmly inflated Intex swimming ring under my head, the other side on my belly and begin reading a book/browsing the net on my phone... This way, I still have that "feeling good" with the toy, even without any sexual activity.

                              On the water, I like when the toys are firm and tight with almost no wrinkles, e.g. when the Intex/Bestway whales/dolphins almost seem to become alive... Or I saw some Intex whales that were stretched by the sun so much that they almost doubled their original sizes...
                              Last edited by zycram; 07-12-2024, 20:13.

                              Comment

                              • Guest

                                Originally posted by puffy cheeks

                                holy cow that is a rare site! looks beautiful though. I could sit back and admire them
                                Walked past the pooltoys shop earlier, and saw the salesgirls replenishing stock, blowing up swim rings, on my way past. I realise that most are sold after lunchtime, and they usually use the afternoon lull period to blow up new rings and balls. I didn't hang around as I don't like being around if any item pops. Especially as they were blowing into each ring till it was wrinkle free, then kept pushing more air till it became really thick and fat, with the outer seam fully taut and straight, with no waviness.

                                Purchased and walked out quickly with the tightest, most swollen and warped purple and clear 20inch ring. It is so beautiful and perfectly overinflated to the very max. It is literally solid firm and glassy. Seems very newly blown and warm. It's so tight the valve pops back out by itself (but the cap is still sealed)

                                It doesn't show any breath droplets near the mouthpiece, but it still feels warm and there seem to be some marks (lip prints) semi wiped off around the valve base. Whoever filled it so overfull deserves a medal for bravery. I hope it lasts!

                                filedata/fetch?id=179234&d=1733639520&type=thumb
                                Last edited by Guest; 08-12-2024, 06:56.

                                Comment

                                Working...