My own pool(s)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • heaviest
    Senior Member
    • Jun 2018
    • 914

    My own pool(s)

    I had a small pool that I never set up because of privacy issues. So, I got rid of it. But the neighbor solved the problem. I didn't want to put up a big privacy fence...but he did! And I was gifted a small pool. Two, actually.

    One is an inflatable kiddie pool. Huge, though. Inside dimension 4x8 feet. About twenty inches deep. It's enough to float a single-wide air mattress. I've had that one out a few days.

    The other is a one-piece 13-foot round pool, 33 inches deep, that is narrower on the top than it is on the bottom, so it's like a huge bowl of water, where the shape of the thing holds the water. This is like the one I got rid of, but bigger, I think. It even has a pump and filter, though I expect that thing to be noise as it is a cheap piece of crap. This pool will be big enough to float a double air mattress. It's too tall for Spry Girl and other large guests to step over, but I'm going to put it next to the patio, which will make that side easy enough to step over, and I'll have to rig something on the inside of the pool to step onto. I'll also have to level the lawn and lay a lot of sand.

    Speaking of sand, I already bought that. I had sixteen bags that I use for stressing inflatables, and I bought another sixteen bags for the pool base, and before I use it for the pool, I'm going to load up an air mattress with 1600 pounds of sand, plus 600 pounds of weight plates, plus a couple hundred pounds of other weights, plus me. Because science!

    It's been a cold spring. I have lots of the thermal pool cover material and I've used it on the kiddie pool and it works well. The public pools are still really cold, though.
  • heaviest
    Senior Member
    • Jun 2018
    • 914

    #2
    Re: My own pool(s)

    Since I temporarily had 32 50-pound bags of sand on my hands, I put them all on a double air mattress, with 600 pounds of weight plates, 300 pounds of dumbells, 60 pounds of ankle weights. I left a big enough patch free for me to sit on. Over 3000 pounds. It was HARD under my butt. I was on it for about five minutes before I heard a rush of air and the thing went flat. Ripped around the ends of one of the inner baffles.

    I've always wanted to load up the watermelon island float with all the weight on one half and see if I could blow an inner baffle on the other half. I couldn't fit all this weight on it like that, but I did get it loaded so that one whole radial segment was exposed, with both its baffles taking all the load. That segment bulged LARGE. I sat on it a while to feel how hard it was (very hard!), but then I sat on the sand bags to increase the load on the unloaded segment. But then it just gradually got not so hard and the thing was clearly leaking. Very disappointing end.

    Next was an 18-pocket single-wide air mattress. I was hoping the inner baffles under the pillow would blow, but the very end of the thing blew a seam before I had all the weight loaded.

    And a flimsy intex transparent mat. I've had well over 1000 pounds on these things, and the pillow grows and grows until it explodes. It takes ten-ish minutes once all the weight is on. I wanted to see what would happen if I just kept adding weight. The pillow exploded when I got to about 1500 pounds.

    Next up a walmart single-chamber air mattress much like the intex transparent mats. I think these are less sturdy. This one exploded when I got to about 1100 pounds. I've had at least a couple hundred more than that on the intex mats for ten-ish minutes, so with a sample size of one, I've determined that the walmart mats are, indeed, less sturdy.

    Comment

    • heaviest
      Senior Member
      • Jun 2018
      • 914

      #3
      Re: My own pool(s)

      I got a patch of lawn adjacent the concrete patio leveled and covered in sand and installed the 13-foot pool there. Put a rubber mat on the patio next to the pool for slip-free pool entry, and a rubber-wrapped concrete slab sunk in the pool as something to step onto. Two metal rails along the edge of the patio with a 36-inch opening between them (Spry girl is a little wider than that but easily squeezes through).

      Next project was to build a sun shade out of poles and mesh. Looks pretty cool. Angled kinda like the backstop fence behind home plate at some baseball diamonds. I nice bit of work if I do say so myself! Between it and the neighbor's privacy fence, there are a few hours per day my little pool has just filtered and indirect sunlight, and Spry Girl can float there without burning (she's very white!).

      The 13 foot pool, which actually measures somewhat less than that around the top, is large enough for a double air mattress with lots of room to spare. It's not big enough for two of them. But I can mostly sink an 18-pocket single while Spry Girl floats comfortable on a double.

      As I'm being stingy on the aircon this year, we're really enjoying the pool. Wish I had the budget for a larger one.

      Comment

      • heaviest
        Senior Member
        • Jun 2018
        • 914

        #4
        New pool!

        I'm using an inground kit, 16x32, but I'm contracting out all the concrete, railings, and the digging of the hole, so while the pool is affordable-ish, the total project is yikes. I'm doing the plumbing and electrical myself, and the assembling of the pool. I'm also extending my tall mesh fence, for privacy, though there's already a wood fence, necessary for code.

        The pool has a custom stair entry end, with commercial grade railings, not part of the kit, and a seating ledge, also not part of the kit. I also wanted a ramp in the pool, but that would require a much larger pool.

        There are three steps down to the pool from the patio, with very sturdy commercial-grade metal railings, and a ramp that wraps the outside of the patio, also with a commercial-grade railing. There will be three places where there will be a total of five commercial-grade benches. Accessibility is very important to this build. I was lucky I have a fairly level yard. There was almost no grading to do, other than around the patio.

        I've been working on this for a few weeks, and today was the first of two concrete pours. There is now a steel-lined hole in my yard, it's plumbed, surrounded by concrete, and a concrete bottom.

        Oh, I have to build a shed for the pump, too.

        About three more weeks.

        Comment

        • heaviest
          Senior Member
          • Jun 2018
          • 914

          #5
          This is how fiberglass is sprayed.

          Comment

          • heaviest
            Senior Member
            • Jun 2018
            • 914

            #6
            Pump and heater on Thursday.

            More concrete Friday-ish.

            "The trades" seem to have an arrangement with the inspectors. Annoying, but also expedient. And expensive. I coulda saved some time knowing up front who I was supposed to pay off.
            Last edited by heaviest; 21-05-2025, 16:23.

            Comment

            • heaviest
              Senior Member
              • Jun 2018
              • 914

              #7
              I built a large shed with a curved wall that faces the pool, with the patio coming right up to the curved wall. That wall will be tiled, and topped with stone and greenery. There are two round planters that will also be tiled and topped with stone.

              That shed is entirely for storing inflatables. It also serves as a privacy fence. It has the most complex roof I've ever built.

              I have to build a smaller shed over the pool filter and heater.

              The second concrete pour, only tangentially related to the pool, is Monday.

              I'm not going to be able to fill the pool until the 14th!

              Comment

              • heaviest
                Senior Member
                • Jun 2018
                • 914

                #8
                Second concrete pour done today. Three of five benches and all railings installed. And my curved wall and planters are tiled and capped with stone, and there are plants all the f over the place out here. Shorts Girl and I have put out some colorful inflatable chaise lounges and sipped some tea by the...empty hole in the yard. It's very pretty.

                My house is very utilitarian. I sit on inflatable furniture FFS. But there are two places that will be photo-worthy for filming and photography. One is that tiled lounge area by the pool, and the other will be two tiled walls, floor and ceiling in the living room. Some of the girls say the latter looks like a palace, some of them say it looks like a subway.

                Fiberglass will be sprayed on the pool next week?

                Comment

                • heaviest
                  Senior Member
                  • Jun 2018
                  • 914

                  #9
                  My pool is filling with water, three days ahead of schedule. I didn't plan to get a heater, but I did, so we should be swimming Saturday.
                  Last edited by heaviest; 11-06-2025, 17:29.

                  Comment

                  • heaviest
                    Senior Member
                    • Jun 2018
                    • 914

                    #10
                    Is it ever going to get warm?

                    Pool is full, heater is running. Emo Girl and I have been in it. It's f-ing cold. It should warm a degree per hour. We'll be in it again tonight.

                    Tomorrow? Cold and rainy. Monday? Might crack 70 degrees. Pool will be warm, so that'll have to be good enough.

                    Comment

                    • heaviest
                      Senior Member
                      • Jun 2018
                      • 914

                      #11
                      Warmer than expected today. Warmed the pool a little extra to compensate for no sun. First real day of swimming!

                      The neighbor is home on a weekday. To ease his potential anxiety over the privacy screens, and reduce the mystery of all the squeaking and popping noises, I invited him over. He's seen the girls, and now he's seen them in their bathing suits, and he's seen behind the fence and shed and screens, so hopefully it won't be weird now. And, he's still usually not going to be here. But while he is, he won't wonder about those noises. I think.

                      His wife, not home today, is kinda large, but it was his sisters-in-law that he mentioned, having seen an 800 pound woman on an air mattress. "My sisters in law might like to know those things will float them!" I gave them a blanket invite and he laughed.

                      I'm going to have an official pool opening party when the weather forecast is better. The neighbors are invited.

                      Comment

                      • heaviest
                        Senior Member
                        • Jun 2018
                        • 914

                        #12
                        It's been a cool spring, but the solar cover has been on for a couple weeks, and the heater is now running, because it's going to get warm in the next couple days. We should be swimming tomorrow!

                        Comment

                        Working...