Soft or firm?
Collapse
X
-
You as well? 😆 I'm not allowed to use it often. Think I've popped everything I ever inflated with it. I just love putting my hand on the vinyl and feeling it grow more and more firm. Also if a toy begins to stretch, I get curious about how much bigger it will get.
It's not about getting a bang for me. I've got plenty of balloons I can do that with.🥰 1Comment
-
Same here, although sometimes the bangs are impressive - much deeper boom than a balloon. I just like to see how big and firm they can get before the inevitable boom. Kids/baby toys often get to twice their "normal" size before exploding 😁
Vicci x🥰 1👍 1Comment
-
-
Comment
-
I love my inflatables blown upHow tight do you inflate your inflatables?
I always blow them rock hard, especially beachballs. It is a ball, so it must be tight. If it pops, which rarely happens, it won't endanger anyone.
If it is a toy for swimming, I will be more loyal to it, because someone can drown, if it pops.
What about you? Tight or not?
full and tight….no wrinkles on the end seams….lol
🥰 1Comment
-
It depends on the toy itself and how I want to enjoy it but in most cases, I like them bouncy, aka neither too soft nor too firm so that I can hump and pump them for a long time before reaching the climactic end (in some cases, by using my hands, too) and shooting a huge load all over the toy.
There is only one better thing than cuddling and humping a big, bouncy and beautiful squeaky inflatable toy: doing this together with a like-minded nice girl while helping her cum as well.🥰 3Comment
-
Guest
I like to blow up the swim rings till they're firm, like the pink ring, in the photo of the 3 rings. If the material is stretchy, I can blow a few more breaths into it, till the wrinkles almost disappear, like the green ring.
If I'm feeling daring, I'll keep blowing more air into it, and make the swim ring swell up and get thick and fat, like the yellow ring, and it usually begins to balloon out and warp more on one side. This is probably reaching the max and anything further is a risk.
The extremely overinflated swim rings the shop puts out for sale are just insane. I can't imagine how many would explode when being blown to such a huge size. But I do love the thick, fat, swollen ballooning look a lot, especially if the shop ladies have newly blown it up by mouth with her breath!
3 rings.jpg Shop.jpgLast edited by Guest; 15-03-2025, 03:03.🥰 1Comment
-
Guest
How tight do you inflate your inflatables?
I always blow them rock hard, especially beachballs. It is a ball, so it must be tight. If it pops, which rarely happens, it won't endanger anyone.
If it is a toy for swimming, I will be more loyal to it, because someone can drown, if it pops.
What about you? Tight or not?
Soft VS Firm - two identical 20 inch Bestway beach balls, one blown up very soft, and another one inflated to the absolute max.
Awesome to see how the vinyl actually stretches and increases by nearly 50% as air is gradually added, breath by breath! I won't add any more air to the tight ball as the vinyl colour is already thinning and becoming lightened and streaky from stretching.
17419021553856360382207562488763.jpg
17419021201991140056484027749021.jpg
🥰 7Comment
-
Guest
Not mouth inflated this time, but pumped tightly. It's still exciting to pump air into the rings till they are fat and hard, no wrinkles and outer seam completely stretched straight, and the pump starts to feel very resistant.
Rings pumped tight.jpg Rings sale tight.jpg🥰 2Comment
-
I like stretching them to the point of seeing these stretch marks, with weight and re-inflation. I like to measure them while they are loaded, to calculate maximum stretch, and also measure them after they've recovered and been reinflated, to calculate permanent stretch. Most recently a 250 pound woman repeatedly, and for long stretches, sat on a 36 inch walmart ball, always on one of the poles. I patched seven or eight holes around the poles before it developed leaks along the side seams, one of which I never found. Loaded, that ball stretched to about 120 inches around (from about 72).
Soft VS Firm - two identical 20 inch Bestway beach balls, one blown up very soft, and another one inflated to the absolute max.
Awesome to see how the vinyl actually stretches and increases by nearly 50% as air is gradually added, breath by breath! I won't add any more air to the tight ball as the vinyl colour is already thinning and becoming lightened and streaky from stretching.
17419021553856360382207562488763.jpg
17419021201991140056484027749021.jpg
In one of the beach ball threads I described in detail the stretches I got when a 205 pound woman sat on a Wavezone 20 inch ball. That thing stretched unevenly, despite our efforts to load it evenly. We got a 65% maximum stretch, from 40 inches to 66, but because some panels stretched more than others, we got a 125% stretch on one of the panels! From under 7 inches to 15 1/2 inches.
I've gotten impressive stretches on the pillows of air mattresses, too.Comment
-
Guest
2.jpg 1.jpg
This 20 inch Bestway beachball has been blown up bigger than a 24 inch and still holds air perfectly, despite years of tight, full inflations. We always blew it up till it was rock hard and really solid, with no give at all.
After being used today outdoors, it stretched even more and was still firm but not tight, so I blew 5 more good breaths into it. The circular patch around the valve, and at the opposite end, are starting to elongate, as some of the panels begin to stretch and thin out uncontrollably! But for now it is tight and bouncy. Only ever been mouth blown, never had a pump attached to it.4.jpg 3.jpg👍 2Comment
-
I call those the poles.
In a beach ball thread I described this phenomena of poles getting out of shape, with the 36 inch Walmart beach ball. A 250 pound woman sat on it for hours and hours, over multiple sessions, keeping it reinflated as it stretched, but only by mouth. In addition to the poles stretching unevenly and becoming more translucent and the ends of the side panels becoming uneven and looking ragged, as they are starting to do on your ball, it also developed pin holes at the intersections of the side panels and the poles. There are six such intersections on each pole, and we got (if I recall) a total of eight pin holes, which I patched with a fingernail-sized piece of donor vinyl, because I wanted to see if the ball would ever reach a maximum stretch and become stable for sitting that much weight on it. That ball unfortunately developed leaks on the side seams, one of which I can't find.
I can see points on your poles where you are likely to develop pin holes. You see how some (but not all) of your side panel intersections are just barely within the inner ring of welding on the pole? Those points are going to develop pin holes. Are you willing to keep going, and patch them?
On the walmart ball, one of my poles is VERY oblong, and is considerably larger than the other pole. Both poles are stretched and oblong, but one is way worse off than the other. It's the top (valve) pole that has most of the patches. The woman always sat with the valve facing up.
The funnest thing ever is when you abuse it enough that there is permanent damage short of a pop. I love bulges and puckers and stretch marks and vinyl cement patches and donor vinyl patches and oblong poles and panels more translucent than they should be.Last edited by heaviest; 30-03-2025, 15:59.Comment
-
As I had mentioned before, I love to bounce on my bigger toys. I inflate the body of my Intex whale to get that optimal "bounciness", aka neither too soft nor too firm. The tail is inflated so that it is just high enough to hold my feet in a comfortable angle. Then I lay myself on the whale with my whole body (on my stomach) and begin to bounce on it with full bodyweight while rubbing my dick against it, and, of course, hugging it and feeling that kind of deep love. Sometimes I get aroused enough to shoot a huge cum load over the toy, all while bouncing on it. If I can open the valve and let some air out to hear a hisssssss while reaching climax, I'm in heaven... This is essentially the same as what excites me in a girl's body, especially if she too is involved in inflatables, enjoying them.
If I choose my (newer) big grey dolphin to play with, I sometimes inflate it to just about 75 percent before humping it so that my knees, my chest and my dick are optimally positioned.👍 1Comment
-
If the material is soft enough, the toy can be firmer for maximum pleasure. This is what I experienced with my brand new Bestway swan. It's squishy, slippery and shiny: I just love to rub myself against that white vinyl.
It was firm but not too firm.
Next time I'll inflate it even more, because its beauty, too, is important for the foreplay. So to say, this toy works a bit like love dolls: if the head is next to wrinkle-free and the wings, too, are bouncy, with minimal wrinkles on the outer edge of the toy, it'll surely be a huge turn-on. Then, I'll probably let some air out to make the toy comfortable.
If I want to hump a toy, I like it a bit softer to bounce on it with my upper body and feel the touch of the vinyl. But if I just want to sit on it, I like it firm because I want to feel that the air is holding me above ground. Sometimes I even get horny while just sitting on the firmly inflated toy: if this happens, it's high time to use my hands to pull the trigger...
For me, these toys are part of overall well-being, including sexual wellness.👍 1Comment
Comment