Any plastic bag blowers or poppers here?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • poppinbags
    Member
    • Nov 2017
    • 45

    #61
    Wow, those pictures look great ArchibaldR!
    Where did you buy these bags, and what size are they (13 gallon I guess)? I want some of these!!!

    Comment

    • ArchibaldR
      Member
      • May 2021
      • 62

      #62
      No these are the regular bags, indeed they are 13 gallons. I've got them from Amazon. The link for the Dutch website is https://www.amazon.nl/dp/B01H3W4AM6?...product_detail s but i don't know how that will be in other countries. And they are pretty expensive of course but imo totally worth it if you really like to b2p bags like i do.

      I also got the textured bags and they also stretch pretty good. Not as good as the white ones but still pretty good. Here are some pictures of those:

      afbeelding.pngafbeelding.png​

      Comment

      • condensatelover
        Senior Member
        • Jan 2022
        • 141

        #63
        I discovered large ziploc bags some time ago... What I absolutely love about them - they are extremely strong and pretty stretchy. You can see 3 pictures showing different inflations - from just firm to extremely tight and almost wrinkle free (it is the same bag)
        If you overinflate these, they do not show stretch marks, they just become plump and very tight. If you go too far, they explode with loud bang. You can blow them until all wrinkles disappear and a little bit more to make them ring like drum.
        They require some practice, because you need to be fast to close the zip-seam without releasing air. I usually close the seam while gently blowing into the bag. I usually blow them using my lungs, it takes 3-4 deep breaths, but sometimes I use pump to get a crystal clear look. Mouth inflation causes condensation which is really obvious. You also get moisture fingerprints sometimes.
        ​​​​​​Mouth inflation also requires adding air a couple minutes later, as the air cools down and the bag shows wrinkles.
        Bags stay inflated for a pretty long time (the longest - almost 2 weeks before), but you can easily reinflate them. Condensation dissipates in 7-8 hours, making the bag look clear. I had an experience of inflating the whole pack (15 pcs), and I had no leaks or pops. They all stayed tightly inflated for 5 days, on the 6th day some began to lose air, but the problem was easily solved.
        I also tried sitting on them - the overinflated ones won't hold, but new ones blown to firm conditions held my 73 kgs. These are 3 liter, but I've recently discovered 6 liter ones online, which are humongous (40cmx40cm). Would love to get them one day.
        Attached Files

        Comment

        • glovepopper
          Senior Member
          • May 2019
          • 390

          #64
          A sleeve-type valve made by me in a small (25x35 cm) bag, similar valves are in foil balloons. This can be easily done with a foil sealer. When done well, it holds the air for several days.
          Attached Files

          Comment

          • condensatelover
            Senior Member
            • Jan 2022
            • 141

            #65
            Originally posted by glovepopper
            A sleeve-type valve made by me in a small (25x35 cm) bag, similar valves are in foil balloons. This can be easily done with a foil sealer. When done well, it holds the air for several days.
            Wow, it looks so tight!
            Did you try to blow it by mouth? Is it possible?

            Comment

            • glovepopper
              Senior Member
              • May 2019
              • 390

              #66
              Originally posted by condensatelover
              Wow, it looks so tight!
              Did you try to blow it by mouth? Is it possible?
              I used a small air compressor and an air gun to avoid condensation, but you can blow with your mouth, through a straw.

              Comment

              • condensatelover
                Senior Member
                • Jan 2022
                • 141

                #67
                Originally posted by glovepopper

                I used a small air compressor and an air gun to avoid condensation, but you can blow with your mouth, through a straw.
                The main question is - will it be possible to inflate it to it's max using lungs.

                Comment

                • glovepopper
                  Senior Member
                  • May 2019
                  • 390

                  #68
                  Originally posted by condensatelover
                  The main question is - will it be possible to inflate it to it's max using lungs.
                  Yes, you can even blow until it bursts, with your mouth.

                  Comment

                  • Squeeze Cey
                    Junior Member
                    • Feb 2024
                    • 150

                    #69
                    Could not believe what I witnessed today. I could hear some squeaking of plastic and pop's every now and then. I went outside to investigate and my male neighbour was casually sitting in his backyard soaking up the sun and having a grand time with some plastic bags that you get from the fruit and vegetables section at the grocery store. As my house is higher than his I was able to see him playing, he did some b2p and then tied of the burst part and got as many more b2p as he could before sucking in the plastic and making little bubbles which he cracked with a clap. I'm so glad I walked by the window when I did because just when I thought it was all over I looked out to see him inflating a giant crisps bag and then slam his palm into it, it made quite a boom and some dogs in the neighbourhood barked. He definitely seemed happy with his efforts. I'll have to keep an eye and ear out for more.

                    Comment

                    • glovepopper
                      Senior Member
                      • May 2019
                      • 390

                      #70
                      Hi guys, I recently bought a pink foil sleeve, unfortunately the width is only 46 cm, but however the bag made from it looks great and is very durable
                      The foil is 90um thick (about 3.5 mils), and it is LDPE.
                      This simple valve holds air very well - if you want I can show how I do it step by step...
                      Attached Files

                      Comment

                      • inbox_pm
                        Senior Member
                        • Apr 2017
                        • 189

                        #71
                        Originally posted by glovepopper
                        Hi guys, I recently bought a pink foil sleeve, unfortunately the width is only 46 cm, but however the bag made from it looks great and is very durable
                        The foil is 90um thick (about 3.5 mils), and it is LDPE.
                        This simple valve holds air very well - if you want I can show how I do it step by step...
                        Oh, they looks awesome! Are they suitable for play/ride, or decoration only?
                        All the bags, available here, are too thin, they stretches nicely, but pops too easy. A similar valve I tried to make in my childhood, when no any "normal" inflatables were available, but were some bags and a soldering iron.

                        Comment

                        • glovepopper
                          Senior Member
                          • May 2019
                          • 390

                          #72
                          Of course, they are suitable for play It's a matter of using foil of the right thickness...
                          I use an electric foil welder with a working area width of 30 cm, it cost about 12€. The 30cm is a bit too small, so I often have to weld on 2 times.
                          In the attachment - a short video of me riding on a different bag, but also made from a foil sleeve with a 90 um (3.5 mil) wall thickness.
                          Attached Files

                          Comment

                          • condensatelover
                            Senior Member
                            • Jan 2022
                            • 141

                            #73
                            Originally posted by glovepopper
                            Hi guys, I recently bought a pink foil sleeve, unfortunately the width is only 46 cm, but however the bag made from it looks great and is very durable
                            The foil is 90um thick (about 3.5 mils), and it is LDPE.
                            This simple valve holds air very well - if you want I can show how I do it step by step...
                            The main question I have - can it be inflated by mouth?
                            Would love to see how to make it. I like these, did you think about selling some?

                            Comment

                            • Bobywan
                              Member
                              • Sep 2012
                              • 40

                              #74
                              Originally posted by glovepopper
                              Hi guys, I recently bought a pink foil sleeve, unfortunately the width is only 46 cm, but however the bag made from it looks great and is very durable
                              The foil is 90um thick (about 3.5 mils), and it is LDPE.
                              This simple valve holds air very well - if you want I can show how I do it step by step...
                              I'd definitely be interested in a step-by-step! I'm also curious how you inflated them and then sealed them with the foil sealer before you made the valve? How did you keep the air in while sealing them?

                              Comment

                              • glovepopper
                                Senior Member
                                • May 2019
                                • 390

                                #75
                                Thank you guys for the response

                                Making an inflatable bag I start by cutting a piece of foil sleeve to the required length. I usually take a piece with a length 150-180 cm, longer may not be practical if we will play with the bag on the bed. Then I seal this piece of foil sleeve at both ends, completely closing it. Next I cut off one corner and in this place I will put an inflation port, which is also a simple one-way valve. The other corners of the bag you can left straight or cut off and seal them again - making a 45-degree cut.

                                I make the inflation port from 2 sheets of foil cut from a piece of sleeve, then seal it twice within a space about 3 cm. The inflation port is 12-13 cm long. Before welding the inflation port with the bag, I put a piece of waxed paper inside the port to prevent the inside from sticking together. It's a good idea to degrease the surfaces of the foil that will be sealed (with isopropyl alcohol), so the joint will be more solid. I show the insertion and sealing of the inflation port in the photos below.

                                When the bag is inflated, the air pressure squeezes the inside part of the inflation port, which works like a one-way valve. Of course, blowing by mouth is possible, but I always pre-inflate bag with an electric pump, because I don't like condensation inside. You can even make a blow to pop, a properly made bag will burst on the long side, not at the seams - it's quite loud . To deflate bag I use a plastic tube which I push deep into the inflation port to open it completely.

                                The attached photos were taken earlier using transparent foil, when I will make more bags from pink foil, I will take more new photos.

                                I don't plan to sell ready-made bags, because the cost of shipping abroad is too high to make it cost-economic for the customer...
                                Attached Files

                                Comment

                                Working...