Well, Hongyi's Getting Warmer
Collapse
X
-
Tags: None
-
Re: Well, Hongyi's Getting Warmer
They're more expensive because it's generally a custom, single unit order, whereas sites like inflatableworld or horseplay toys have a single design mass produced and then sell them. It's never going to be as cheap unless you're ordering dozens of units at a time. -
Re: Well, Hongyi's Getting Warmer
Over the years, I've had about two dozen custom designs of PVC inflatables that I would have loved to have made, many of them life size, but the problem you've noted above has always been an expensive and risky proposition, thus have never been able to feel the desire to get a custom order made.
It's really something only someone can do if they come within a huge money winfall. I blew through $500 about six years ago, and that was just to get a prototype made of a design, which on my shitty pension was a killer. This was despite accurate "gridded" briefs done in Adobe Illustrator, the guy still got it wrong, used that shitty matte plastic, and still had the nerve to charge for another prototype. This wasn't Hongyi, but my confidence in these places after that experience is rather low.Comment
-
Re: Well, Hongyi's Getting Warmer
I broke down and ordered the zebra pictured above with a SPH. Tl/dr, worth the money. Ordering on alibaba is kind of a pain in the ass -- you can contact the supplier directly via their site and tell them what you want. They send you a quote back which I was able to pay with paypal. English isn't the first language of the person you'll likely be talking to, so I tried to keep it simple. In this case I included the link and said I'd like to buy one of those with an sph and express shipping. My order arrived via fedex about 2 weeks later.
The quality on the build is very good -- the toy has chambers for the head, body, legs, arms and both pieces of hair pictured. The vinyl is very soft, somewhat heavier than I'm used to and has no sharp seams anywhere. The toy does not have any of that smell we're all used to when you open a new inflatable toy. It doesn't smell like anything at all. I decided I kind of like that, though.
All the nozzles have those double-stop covers that seem to be popular on the newer custom toys -- you can pop both out and inflate very easily with no safety valve and you can push the top with the valve in and add air a bit more slowly and it pretty much just stays in there. Once you're done inflating, you can push the stopper back in to keep any air from leaking.
There are chambers on the toy for the head, both pieces of hair, the main body, each of the breasts, both arms and both legs. The nozzles for the main body and legs are large and it was quite easy to inflate. The arms, head, hair and breasts have smaller nozzles but also didn't take long to inflate.
The face on this toy is incredibly detailed and the painting is quite nice. The body shape overall is also very nice, although the breasts are a little large for my taste. I ended up deflating them about halfway, which helped with that. It also seems quite sturdy and I was comfortable putting my weight on it (I weigh about 230 pounds, not what I'd call light.) The SPH was also a comfortable fit and feels very nice. I'm about average in the pipe department though, if you're like a soup can with a tomato on top it might be too tight for you.
My main concern was that I'd be getting quality similar to what I'd find at inflatableworld.com, but the build quality level seems to be similar to what I got with Puffypaws back in 2010 with their vixen. It's very much custom toy quality and it feels like a lot of thought has been put into its design.Comment
-
Re: Well, Hongyi's Getting Warmer
well its also much thicker and studier vinyl and if you want with built in SPH ^^Comment
-
Hi! New to this forum.
I've ordered from Hongyi a few times already. Pretty expensive at first, it was my first order. But I was highly impressed.
I had two custom 0.4mm 1.5m (5ft) TPU dolls made last year. One with 2SPHs and the other with 3SPHs.
The quoted prices for the 2SPH one 0.4mm 1.5m PVC doll was 650$+110$USD shipping. (I'm in Canada).
I asked to change the color and material to black 0.4mm TPU instead.
The final price for one went up to 1480$ + 130$usdshipping. So 1610$USD total.
The other one was a bit cheaper because it was a simpler design (less material).
Same specs: 1.5M (5ft) 0.4mm TPU, 3SPHs. came in at 1060$ + 120$USD shipping (+Paypal fee).
I was able to get a break on shipping as they shipped together. Saved 60$.
Very high quality, study, high quality fast inflate/deflate valves (lots of em!).
I ordered another one this year in black glossy PVC this time. Yes, glossy is an option, else you get matte black pvc.
I learnt from the first order that TPU kinda sticks to the skin as it heats up from touch.
This one was ordered during their free shipping sale that they hold twice a year. Saved all the shipping fees, and got 30$ since it was over 500$.
The doll was 0.4mm 2M (6.5ft) Glossy PVC with 3SPHs, and came in at 682.30$USD all in (630$ + 52.30$USD Paypal fee).
Overall, I'm very happy with Hongyi products, they're pretty fast with their communications. They ask to confirm all the details before sending you a PayPal invoice for the order. They send you a couple emails with pictures once they're done, before shipping.
They do email you with new models and ask if you want to order more a couple times here and there.
Can't really blame them for trying.
I'll post pictures if anyone is interested.
Comment
-
Yes, please post pictures! I would be very interested to see what they made for you. I am on their mailing list but have not purchased from them as of yet.Comment
-
Yes, please post pictures! I would be very interested to see what they made for you. I am on their mailing list but have not purchased from them as of yet.Comment
-
-
Comment
-
-
SniperKitty - I wish you luck with your order. I have not ordered anything from them in the last couple years, but several large customs before then. I found that it was really hit and miss with Hongyi, sometimes you would get great print and build quality but weird stiff vinyl or layers of thinner vinyl substituting large colored areas.
They made a 'copy' of the intex shamu whale in 3m where it appears to be partially standing on it's fluke and pectoral fins, what a disaster! You will see it occasionally in their ads, it seems to look ok enough to order.. but it's a mess! I complained and got the cold shoulder and that was it for me, I've spent thousands there and that's what they chose to end it with. The vinyl was thick almost 1mm that was obviously left over from something else they made or working on. Because it was so stiff and hard to work with, they burned holes everywhere making the seams.. how did they fix it? Melted more vinyl over the holes, even used clear to patch some of the larger holes. It was over $900 without shipping, when it arrived the shamu face was printed on thinner material and then thermally tacked on, most of the tacks leaked. The white areas were just thin white vinyl tacked over the thick black.. just a horrible mess, basically stole my money on that one.
That said, there were a couple premade items that I purchased in one of their sales that were perfect. They made me a 4M toothless dragon without the wings, toes or any extra appendages stuck to the body other than the arms and legs. I treated it with ATBC and it's one of my favorites still after 6 years, it's like it was left out in the afternoon sun. Tried the same with another toy from them and got completely different results. So I don't think Hongyi can be really consistent without volume, which is understandable.. but that is what should be reflected in paying the premium for the customs.
U
Comment
-
Good to know. I've received all 3 orders i've shown above. The first two were made of TPU. Very shiny and high quality. They do get a bit clingy with your skin once body heat warms it up. The glossy pvc doesn't have that issue. But you can see all the white line where they cut all the pieces. Give it a bit of an odd look but that's ok. I also ordered a giant butt but the hole in the middle is clearly too big for an SPH. Maybe it's made for a onahole? Who knows? Anyways. I'll definitely only buy when they have their free shipping sale and very specific models. i'll keep an eye on material and quality. So far, so good.SniperKitty - I wish you luck with your order. I have not ordered anything from them in the last couple years, but several large customs before then. I found that it was really hit and miss with Hongyi, sometimes you would get great print and build quality but weird stiff vinyl or layers of thinner vinyl substituting large colored areas.
They made a 'copy' of the intex shamu whale in 3m where it appears to be partially standing on it's fluke and pectoral fins, what a disaster! You will see it occasionally in their ads, it seems to look ok enough to order.. but it's a mess! I complained and got the cold shoulder and that was it for me, I've spent thousands there and that's what they chose to end it with. The vinyl was thick almost 1mm that was obviously left over from something else they made or working on. Because it was so stiff and hard to work with, they burned holes everywhere making the seams.. how did they fix it? Melted more vinyl over the holes, even used clear to patch some of the larger holes. It was over $900 without shipping, when it arrived the shamu face was printed on thinner material and then thermally tacked on, most of the tacks leaked. The white areas were just thin white vinyl tacked over the thick black.. just a horrible mess, basically stole my money on that one.
That said, there were a couple premade items that I purchased in one of their sales that were perfect. They made me a 4M toothless dragon without the wings, toes or any extra appendages stuck to the body other than the arms and legs. I treated it with ATBC and it's one of my favorites still after 6 years, it's like it was left out in the afternoon sun. Tried the same with another toy from them and got completely different results. So I don't think Hongyi can be really consistent without volume, which is understandable.. but that is what should be reflected in paying the premium for the customs.
U
Beile inflatable is also Hongy, correct? They have the same stuff pretty much. It looks like a bunch of Hongyi employees started their own company. Maybe I'm wrong?Comment
-
I'm really tempted to order one of these....
"custom size" and no details of what size you get for the price range shown. I'm assuming the one in the photos is towards the more expensive end of the range. Difficult to judge size but chinese people are generally smaller so I'm guessing probably 2.2m or so tall. The person sat on it is probably half my weight but even so I'm impressed how well it's supporting him. I reckon I could have some very nice rides on that....Comment
Comment