Kin Ball

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SirSquishy
    Senior Member
    • Mar 2020
    • 233

    Kin Ball

    Has anyone here heard of a sport called Kin Ball? I don't understand it completely, but there are videos online of international competitions. Here's a wikipedia article about it: https://en.wikipedia.org/wiki/Kin-Ball

    ANYWAY, Kin Balls have these large latex bladders that they put inside the cover of the ball, up to 72" inches! https://www.gophersport.com/pe/balls...cement-bladder

    Has anyone tried playing with these, in the sport or bedroom?
  • Exaturbo
    Senior Member
    • Feb 2021
    • 201

    #2
    Re: Kin Ball

    I have not, but I would like to. Didn’t know till you posted that these were even a thing.

    But at probably close to $100 for a 48” one delivered to Australia, it’s a little beyond my finances right now.

    Comment

    • balloonPatcher
      Senior Member
      • Jun 2020
      • 291

      #3
      Re: Kin Ball

      These bladders are one of my favs. They are a heavy fluted balloon that inflates very round and is very soft and bouncy.
      Attached are pictures of the 36" omnikin latex bladder from the omnikin website. I had a 60", it was too huge for what I use my balloons for.
      Attached Files

      Comment

      • balloonPatcher
        Senior Member
        • Jun 2020
        • 291

        #4
        Re: Kin Ball

        Explore Omnikin’s wide range of sports equipment and equipment for both physical education and other activities for people of all ages. Learn more.


        Here is the link.

        Comment

        • Exaturbo
          Senior Member
          • Feb 2021
          • 201

          #5
          Re: Kin Ball

          Originally posted by balloonPatcher
          I would like to get one to see for myself, but again the cost would be prohibitive.
          At $56 us for the 48” one, then add probably $20 us postage (if not more)
          Then add the exchange rate and I’m in it over $100 au.

          That’s just too much for me. For a single balloon.
          I thought my cattex 55” ones were costly at around $30 au each.

          Shame, as they look like they could be fun.

          Comment

          • SirSquishy
            Senior Member
            • Mar 2020
            • 233

            #6
            Re: Kin Ball

            Originally posted by balloonPatcher
            They are a heavy fluted balloon that inflates very round and is very soft and bouncy.
            Are there very strong? I would love to get one, but don't want to purchase if they are weak and prone to popping. For the price, that would be an expensive pop. I imagine they are quite resilient if they are made for sport.

            Comment

            • balloonPatcher
              Senior Member
              • Jun 2020
              • 291

              #7
              Re: Kin Ball

              Measured the weight of some other 36" balloons.
              Tuftex 36" 37 grams
              Payoso 36" 33 grams
              Cattex 36" flat 41 grams
              The 6 litre rebreather bladder is about 110 grams.
              I included a picture for comparison.

              The 33-36" Omnikin latex bladder weighs 150 grams.
              Expensive but there is nothing else like it IMHO.
              Especially if you want to put your weight on it.

              A good alternative would be the Cattex 43" flat
              also at 150 gram weigh but of course not as round.

              Hope this helps
              Attached Files

              Comment

              • SirSquishy
                Senior Member
                • Mar 2020
                • 233

                #8
                Re: Kin Ball

                This is helpful, thanks!

                Comment

                • Exaturbo
                  Senior Member
                  • Feb 2021
                  • 201

                  #9
                  Re: Kin Ball

                  Originally posted by balloonPatcher
                  Measured the weight of some other 36" balloons.
                  Tuftex 36" 37 grams
                  Payoso 36" 33 grams
                  Cattex 36" flat 41 grams
                  The 6 litre rebreather bladder is about 110 grams.
                  I included a picture for comparison.

                  The 33-36" Omnikin latex bladder weighs 150 grams.
                  Expensive but there is nothing else like it IMHO.
                  Especially if you want to put your weight on it.

                  A good alternative would be the Cattex 43" flat
                  also at 150 gram weigh but of course not as round.

                  Hope this helps
                  Thanks for the info.
                  I think I’ll stick with my cattex 55” for now. At around 1/4 the cost for me they make much more sense.

                  Comment

                  • SirSquishy
                    Senior Member
                    • Mar 2020
                    • 233

                    #10
                    Re: Kin Ball

                    On that gophersport website, there's a "TPU bladder." I wonder how that compares to the latex version.

                    Comment

                    • Guest

                      #11
                      Re: Kin Ball

                      If they're that strong, the rubber bladders should be perfect for hopping around on.

                      Comment

                      • Guest

                        #12
                        Re: Kin Ball

                        Anyone tried Gophersport's 18-24" replacement bladder, orange latex? Made in India, I believe. I assume it's heavy compared to a comparable sized balloon but do they reach rated size?

                        Comment

                        Working...