Vinyl thickness vs. softness/feel

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zycram
    Senior Member
    • Nov 2024
    • 408

    Vinyl thickness vs. softness/feel

    Many of you mentioned that soft vinyl is crucial to get the feeling all of us want. However, soft and/or thin vinyls often leak more easily, they are less durable.
    On the contrary, the Intex floating recliner lounge is made of 18-gauge vinyl, aka boat quality. With a minimal amount of lube, it's boinkable. I exploited its bounciness to the fullest to stimulate myself and eventually shoot a huuuuuge cum load. It was at least as good as the Inflatable Drop SPH beach ball when I inserted my cock into the opening, then inflated the ball with an electric pump to reach optimal squeeze.)

    What do you think about thicker/thinner/softer/stiffer vinyl? How does the thickness/softness of the vinyl contribute to how the toy feels when boinked? I personally love boat quality vinyl too. IMHO the exact form of the toy at the boinking spot and elsewhere, where it comes to contact with your body, and, of course, the overall firmness of the toy (aka how much it is inflated) play a more important role than the thickness/softness of the vinyl itself. What do you think about this?
  • Bass Boll
    Senior Member
    • Jun 2023
    • 211

    #2
    Yes, it's always an interplay of thickness, softness, surface texture, form factor and pressure. And personal taste. For me the vinyl should be thinner and softer (it's still more durable than a latex balloon), and I think I prefer matte over shiny because it feels less sticky.

    Comment

    • zycram
      Senior Member
      • Nov 2024
      • 408

      #3
      Originally posted by Bass Boll
      Yes, it's always an interplay of thickness, softness, surface texture, form factor and pressure. And personal taste. For me the vinyl should be thinner and softer (it's still more durable than a latex balloon), and I think I prefer matte over shiny because it feels less sticky.
      Stickiness can be treated by using a bit of lube. The form factor plays a key role in case of the Intex recliner (I boinked it between the tubes and it was magnificent) while the vinyl of the IW skunk is thinner. I love that toy too because of the full-body experience but I fear it's gonna pop one day.

      Comment

      • ricky
        Member
        • May 2017
        • 95

        #4
        Gauge is a small factor imo, the composition of the vinyl is much more important. I wish coleman still made Inflatables, I have a few of their rafts that are 20 gauge which make them nice and durable, but the material is very rubbery feeling so it's very flexible and bouncy even though it's fairly thick. Adding to the durability they seams are really high quality and I've never experienced them leaking even with rough play. I was feeling devious this summer and took one of these rafts to the river, overinflated it quite a bit, and tried to pop it by rubbing it against all the sticks at the edge of the river and none managed to poke through even when I thrusted the raft into them.

        Comment

        • Himeno
          Senior Member
          • Dec 2024
          • 142

          #5
          For me it really depens on what the toy is. I'm very much in love with soft Balloons but also recently got the Chance to try out a cute pink Ride Roll and it was soft and lovely😊
          But what gets me wet the most and I also tried that thanks to you zycram is the Intex Canopy Island inflated tightly on the water without me even touching the water. This inflatable toy feels like chilling in Heaven and deflating it slowly on the water is like perfect feel and softness combined☺️

          Comment

          • xp0p42
            Senior Member
            • Sep 2024
            • 226

            #6
            Great thread 😍

            Too many comments to quote all of em, so I'll just say everyone is spot on 😅 I think Bass Boll's word "interplay" sums it up, the right shape meets the right texture meets the right feel meets the right pressure and so on. It's how I feel sprawled out on one of my IW toys or an Intex Orca, the combination of the sight/smell/feel is magic. I could write pages on it and still not describe it correctly 😉

            I definitely prefer soft silky "squeezy" material, in general for me it's not risky becuz I don't play outdoors. No rough sand or pokey grass or sticks or whatever else to make holes. I could definitely see thinner material being a problem in those cases, my IW toys wouldn't last long.

            And I also tend to prefer matte material, it tends to have more of that inviting silky smoothness to it.

            Crap, now I wanna unpack one (or more) of my toys and have a few deflate-n-ride sessions. And I finally had the place organized again, thanks a lot Himeno 🤣😘
            🍻
            Write any time, let's chat 🤗

            Comment

            • Void
              Member
              • Mar 2026
              • 31

              #7
              I'm more of a balloon guy, but I recently bought some inflatable footballs, and basketballs to test. I will say Vinyl is a huge difference from latex, obviously... but it's nice. These seem to have .4mm thickness and feel pretty solid when inflated to the proper 3 foot size. Being able to sit on them and bounce on them with my full weight is *quite* a good feeling though! The smell is a nice change, too. I suppose i'll have more of an opinion if I ever get different inflatable types to try though!

              Comment

              • xp0p42
                Senior Member
                • Sep 2024
                • 226

                #8
                Originally posted by Void
                ...I suppose i'll have more of an opinion if I ever get different inflatable types to try though!
                This is how I feel about some types of balloons, I need to do some experimenting 😀🍻 The Nastila group has some shapes that look really fun 😀
                🍻
                Write any time, let's chat 🤗

                Comment

                • PVC Vinyl Enthusiast
                  PVC Fetish
                  • Jan 2013
                  • 197

                  #9
                  The PVC Gauge (Thickness) definitely plays a role in the perceived softness, but a far more influential factor is the Type of plasticiser(s) and the PHR (Softness Value).

                  Quality has gone downhill since the widespread use of 6P-free (non-phthalate) PVC.

                  By far, the tried-and-tested phthalates, notably DEHP (DOP) and DINP, have far more superior plasticising efficiency compared to non-phthalates like DINCH, DOTP, ATBC, etc.

                  There are two classes or groups of phthalates:

                  High Molecular Weight phthalates (e.g. DINP and DIDP).

                  Low Molecular Weight phthalates (e.g. DEHP, also known as DOP).

                  DEHP (DOP) was banned from use as a plasticiser in toys that can be placed in the mouth of a baby or young child.

                  Unfortunately, inflatables enjoyed by Adults are lumped in as 'toys' young children could use, and manufacturers like Intex and Bestway use 6P-free PVC for all their products.

                  DINP, which is a different class of phthalate compared to DEHP (DOP), has much less restrictions than DEHP: as a precautionary measure DINP was discouraged for use in children's toys that may be played in the mouth of a baby or toddler; however, EU's REACH permits it for use in consumer goods intended for use by Adults.

                  Unfortunately, though, no distinction is made by the large consumer mass-market inflatable manufacturers like Intex, Bestway, etc, between children's inflatable toys and inflatables for Adult Only use; the latter of which could perfectly legally employ DINP as the plasticiser.

                  Also, unfortunately, inflatable companies like Intex, Bestway, etc, do not distinguish between the Low Molecular Weight and the High Molecular Weight phthalates: these companies treat them as one and the same, but they are very different in their chemical properties, and DINP has a proven safety.

                  Wanting to recreate the PVC of the 1990s, I have already had DINP PVC inflatables custom-made for me. Having the custom spec PVC material specially made was additional expense, but well worth it.

                  I have more inflatable projects in the pipeline, and I might try a DINP-DEHP plasticiser Blend consisting of 70% DINP with 30% DEHP (DOP), with a PHR of 70 (70 PHR is about the highest one can practically go for softness without compromising on the structural integrity of the inflatable). PVC thickness will be 400 microns: not too thin, but neither too thick, and with a PHR of 70, it certainly will not have a semi-rigid feel to it like an industrial PVC curtain/tarp.

                  Because it is a Custom project, and I do not intend to put products on the retail market for use by young children, it is perfectly legal for me to choose DINP, and even the more restricted phthalate, DEHP (DOP).

                  Because DEHP (DOP) has a higher vapour pressure than DINP, its incorporation into a DINP-DEHP plasticiser blend, with a high PHR of 70, will undoubtedly help recreate that lovely 'sweet' aroma associated with the new inflatables of the 1990s.





                  Attached Files
                  Last edited by PVC Vinyl Enthusiast; 09-10-2026, 13:33.
                  Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

                  Comment

                  • Inflatable18
                    Member
                    • Jul 2023
                    • 32

                    #10
                    I’m unfortunately in the minority who likes firm vinyl, so most new customs (and a lot of regular toys) leave a lot to be desired. I personally prefer riding the toy, but I don’t like sinking in super far. IW is really bad with this.

                    Basically all the new runs of custom toys are using stuff like 0.4mm 80 PHR vinyl, which even at 140lbs I will sink into unless I overinflated the crap out of it, which causes more problems…

                    Comment

                    • PVC Vinyl Enthusiast
                      PVC Fetish
                      • Jan 2013
                      • 197

                      #11
                      Originally posted by Inflatable18
                      I’m unfortunately in the minority who likes firm vinyl, so most new customs (and a lot of regular toys) leave a lot to be desired. I personally prefer riding the toy, but I don’t like sinking in super far. IW is really bad with this.

                      Basically all the new runs of custom toys are using stuff like 0.4mm 80 PHR vinyl, which even at 140lbs I will sink into unless I overinflated the crap out of it, which causes more problems…
                      I guess we all have different tastes.

                      Personally I like the 'squidgy' softness of the IW whales, for example, but for a different inflatable structure, such as the spherical 7ft gigaball-like 'bondage sphere' I am working on, upping the PVC thickness to 400 microns will maintain structural integrity even at a high PHR of 70.

                      Hongyi Inflatables are seemingly able to design almost any custom-spec inflatable; I am impressed with their inflatable-making skills. You can even choose to have the PVC material made from scratch, and if you have knowledge on the various different plasticisers and stabilisers used in PVC, you can request a specific PVC material to be made. It obviously costs more compared to using their usual stock materials, but it is worth it.

                      If you like, to replicate the 1980s or 1990s-Y2K top quality PVC, you can choose DINP (or even DEHP) plasticiser for your custom-spec PVC material, as the EU REACH regulations on phthalates only apply to Consumer Market PVC articles intended for babies and young children.........the REACH phthalate regulations/restrictions on permitted or disallowed end-use do not apply to Custom-made PVC articles, including PVC inflatables, intended for use by an Adult.
                      Last edited by PVC Vinyl Enthusiast; 10-10-2026, 13:03.
                      Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

                      Comment

                      • ricky
                        Member
                        • May 2017
                        • 95

                        #12
                        Originally posted by Inflatable18
                        I’m unfortunately in the minority who likes firm vinyl, so most new customs (and a lot of regular toys) leave a lot to be desired. I personally prefer riding the toy, but I don’t like sinking in super far. IW is really bad with this.

                        Basically all the new runs of custom toys are using stuff like 0.4mm 80 PHR vinyl, which even at 140lbs I will sink into unless I overinflated the crap out of it, which causes more problems…
                        One workaround is to use inflatable toys in the cold, they get super firm. Even the snow tubes that I bought that specifically market a special pvc formula to stay soft in the cold weather will still be fairly rigid, just not as much as summer toys.

                        Comment

                        • Joe Sixpanel
                          Member
                          • Sep 2018
                          • 61

                          #13
                          I agree that the new pool toys suck compared to the old ones. They're too stiff, and no normal person would struggle to really stretch them out like in the good old days, when it wasn't too uncommon to see a young lady at the pool blow her beach ball or pool ring far past the point the point at which I would have said it was "properly inflated." Those pool toys would really balloon out, which was thrilling (and terrifying) to me as a nonpopper.

                          I like to think of myself as an environmentally and socially conscious citizen, but damn! I miss those banned plasticizers.

                          Comment

                          • xp0p42
                            Senior Member
                            • Sep 2024
                            • 226

                            #14
                            Originally posted by Joe Sixpanel
                            ...I like to think of myself as an environmentally and socially conscious citizen, but damn! I miss those banned plasticizers.
                            Hah, well said! They don't make em like they used to, that's for sure. These days they also always have to have that max pressure indicator & safety chambers & bla bla bla as well.

                            🍻
                            Write any time, let's chat 🤗

                            Comment

                            Working...