Can anyone recommend beach balls for popping?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • J Popper 94
    Junior Member
    • Nov 2018
    • 7

    Can anyone recommend beach balls for popping?

    Pretty much what the title says, I'm discovering that ones made by different brands can be quite different in terms of things like material, thickness, how sturdy the seams are, the valve e.t.c.

    I was wondering if any fellow poppers could recommend a particular brand or the like that pops nicely? I tend to do like sit and bounce or ride to pop, but would also like to be able to do blow to pop.

    The valves on some are way too bad at letting enough air in for a blow to pop to be remotely possible, and for sit/ride pop my ideal would be one that's resilient enough not to pop immediately, but will pop without tons of difficulty after stretching and having more air topped up to make it nice and tight again a few times. I'm good with either seam splits or panel shredding pops, I like them fairly loud but not right to the extreme.
  • Kitten
    Senior Member
    • Jul 2023
    • 548

    #2
    Intex are usually good. Fresh ones always get big and go bang. Other brands can be good too but are more likely to leak.

    Comment

    • J Popper 94
      Junior Member
      • Nov 2018
      • 7

      #3
      Ah, OK, so they’re good at not ruining the bang by springing a leak as you go, good to know! Been a good while since I tried Intex and back then they were horribly stiff and wouldn’t pop at all.

      What kinda sizes have you tried? And do you know if they’re any good for blow to pops?

      Thanks!

      Comment

      • Kitten
        Senior Member
        • Jul 2023
        • 548

        #4
        Originally posted by J Popper 94
        Ah, OK, so they’re good at not ruining the bang by springing a leak as you go, good to know! Been a good while since I tried Intex and back then they were horribly stiff and wouldn’t pop at all.

        What kinda sizes have you tried? And do you know if they’re any good for blow to pops?

        Thanks!
        The standard size (24 inch maybe) get big and go with a nice bang. The really big ones aren't as loud and are a bit more likely to leak. Can still go bang if you're lucky. The normal sized ones are a bit of a struggle to pop but fun.

        Comment

        • Vicci
          Blown to bits
          • Oct 2009
          • 816

          #5
          I've found Intex to be good on first inflation too - 42" are good, I've had quite a few of them go with a bang. Some occasionally spring a leak but you can put your finger over it and a few blows later it'll tear in half.

          Intex smaller ones are good outside in the winter, I've had the vinyl actually tear on some of them when they're stiff, rather than popping at a seam.

          I find the warmer it is, the more likely you are to get a seam split as the vinyl stretches, although I have had a couple of good "booms" on the beach recently.

          Remove the safety flap in the valve to get maximum pressure 💪
          Vicci x

          Comment

          • J Popper 94
            Junior Member
            • Nov 2018
            • 7

            #6
            Originally posted by Vicci
            I've found Intex to be good on first inflation too - 42" are good, I've had quite a few of them go with a bang. Some occasionally spring a leak but you can put your finger over it and a few blows later it'll tear in half.

            Intex smaller ones are good outside in the winter, I've had the vinyl actually tear on some of them when they're stiff, rather than popping at a seam.

            I find the warmer it is, the more likely you are to get a seam split as the vinyl stretches, although I have had a couple of good "booms" on the beach recently.

            Remove the safety flap in the valve to get maximum pressure 💪
            How do you remove the safety flap?

            Comment

            • snh61
              Senior Member
              • Sep 2017
              • 133

              #7
              Needle nose pliers...

              Comment

              • Vicci
                Blown to bits
                • Oct 2009
                • 816

                #8
                I just grab hold of it though the other side of the inflatable and pull it off 🤷🏻‍♂️
                If you want to be fancy, you can then push the bit you've pulled off through the valve to take it out.
                Vicci x

                Comment

                • bill.mcgavok
                  Junior Member
                  • Mar 2022
                  • 29

                  #9
                  Intex is by far the best brand for popping and my favorite for blow to pops! The 24” ones stretch really good and I think sometimes have a bigger boom than the 42” jumbo ones. Both balls are meant to be played with and fucked hard until they pop

                  Comment

                  • J Popper 94
                    Junior Member
                    • Nov 2018
                    • 7

                    #10
                    Originally posted by Vicci
                    I just grab hold of it though the other side of the inflatable and pull it off 🤷🏻‍♂️
                    If you want to be fancy, you can then push the bit you've pulled off through the valve to take it out.
                    I've tried that with a couple recently but it seems to be on there pretty good, couldn't manage to do it just by pulling it :/ I feel like I might just be being dumb and missing something here......

                    Comment

                    Working...