Swimline inflatable peacock lounger

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zycram
    Senior Member
    • Nov 2024
    • 408

    Swimline inflatable peacock lounger

    Can any of you guess where the outer ring of my Swimline peacock lounger loses air? It tends to deflate in a few hours. This is an excellent toy but too bad I have to pump it up again and again...
    Attached Files
  • Clockman
    Junior Member
    • Mar 2025
    • 23

    #2
    Try putting some liquid dish soap and water in a spray bottle, and spraying it down while it's tightly inflated. You should see bubbles forming around the leak.

    Comment

    • zycram
      Senior Member
      • Nov 2024
      • 408

      #3
      Originally posted by Clockman
      Try putting some liquid dish soap and water in a spray bottle, and spraying it down while it's tightly inflated. You should see bubbles forming around the leak.
      It's not that easy... The backrest and the wings are attached to the outer ring and if the air is coming out near te attachment points, I won't be able to see it if the toy is tightly inflated.

      Comment

      • Clockman
        Junior Member
        • Mar 2025
        • 23

        #4
        Ah, I see. In that case, you could try reinforcing the offending seams with some HH-66 vinyl glue: https://rhadhesives.com/product/hh-6...ement-product/

        Heath Dragon used to have some instructional videos up on youtube, but no longer. Per his advice, you can use a blunt-tip syringe (must be blunt tip!) to dispense a line of cement on either side of the seam, sort of filling in the valley a bit. This should take care of any small pinholes. You will have to do this while the damaged chamber is uninflated, as the glue cannot join the material while air is escaping. Good luck!

        Comment

        Working...