Advice on custom foil and mylar balloons?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Big Thud Joe
    Senior Member
    • May 2017
    • 407

    Advice on custom foil and mylar balloons?


    Well, I don't know where to begin with this because I've just had such bad luck with these type of balloons over the years, maybe I'm just either buying from the wrong places, the stock is old where the glue that binds the sides has debonded, or maybe these balloons just don't work with my style of looning.

    The concept of getting into mylar balloons spawned from the fact that I was hugely turned on as a tweeny and teenager with the empty foil bladder bags of 10 and 15 litre beverage casks here in Australia, more noted as the "goon bag'.

    More so over the 15 litre casks as when they where fresh from beverage use, the foil would have minimum to no trauma creases or scrunch wear, the entire foil bag felt so nice, particularly just after a shower, where after inflation, the negative concave sections of the long sides would perfectly curve with the arch of my side of my torso and back. Freshly inflated, I would tickle and dab the longer concave section over my skin of my torso or back, and immediately aside from an intense erection, I would have the most incredibly strong orgasms, I know sounding rather weird, but it was just a very natural organic reaction, without being forced, or having to be deliberately pushed in anyway.

    The problem with these casks is the way they are packaged in the card board box, they are vulnerable to the type of contamination indicative to a retail and supermarket environment, but not all of the time

    When the box and handle are completely sealed and the cardboard handle hasn't been broken, then the foil bag inside, to what I consider is virgin clean, and has not been touched. Unfortunately most of these casks have the handle broken from the actual fact that the supermarket shelf stacker has had to break the handle to lift the casks packaging up onto the shelf.

    This means trying to get these unbroken is unfortunately rare, and when I do see them intact, I'll grab them, and be ultra careful from basketing them, paying for them during scanning, getting them into transport to home, and into my unit, without breaking the outer cardboard packaging, and so far I've been successful. However the exercise every time is a real hassle, and often annoying from the fact of not accidently breaking the rather fragile outer packaging.

    Around 2002 a contact at my workplace new the local Anagram Balloons distributor. Finally there was an alternative. I was able to get some balloons at half price, the first balloons I tried where the large blue and purple foil sharks. These all came packaged and sealed, and initially were the answer to the issues I was having with trying to get beverage casks intact.

    At the time, we lived in a mountain climate, cool with very low humidity. I often showered before retiring for the day, so I would hand pump inflate one of these new foil sharks for taking into bed, and initially it was absolute bliss. The new firmly inflated foil upon my silky smooth skin was heaven, and I was able to come very, very quickly, edged for a wile, and then climaxed in the most beautiful immersive way. It sounds stupid, but there was a very strong arousing connection taking place. Though they were a bit pricey, about AU$12 each, all my looning prayers were answered, well, at least I thought. After about three nights, the balloon lost it's firmness, and initially thought that it would have just been the foil stretching. When listening closer, I definitely heard a shshshshshsh, and yep, there indeed was a leak.

    The next night I inflated a fresh one, and within fifteen minutes, the entire side just blew out. I don't know. I wasn't humping them, crushing them, not deliberately blowing to pop. I would just lay in bed with the blankets on top, with the balloon on top of my body, there was no weight being pressed on it.

    I'd be laying there for over an hour, just gently hugging, and patting it. Maybe with the warmer temperatures under the blankets, they'd be some expansion taking place, but still not so much that it would make a foil balloon rupture in such a spectacular way.

    A few months later, I got two 68 inch Gasper skywalkers, and finally success, I had these for a few years before they broke, these were also Anagram. By 2005 life moved on, and I no longer had the Anagram contact. I remember as a toddler, I had some fascination with Daffy Duck. Bought half a dozen 72 inch Daffy Duck heads of ebay around 2007. The first one inflated proved to be false hope. Inflated nice and firm. Laying naked in bed, I poked the firmly inflated black nose portion into my groin and again, came quickly, as I would gently pat the rest of the head for stirring up the libido. Second time in use, a leak rapidly developed under the nose with air rushing out. It seemed to have been a point of vulnerability. The other five developed the leak upon immediate first inflation.

    2015, I bought a whole pile of 28 inch mylar balloons in the shape of green superbowl football jerseys. They arrived a few weeks later, where I inflated first balloon. The first night I scrunched and played with it wile watching telly, by the second night (again) it developed a leak. Over the next few weeks, I tried inflating another four dozen out of the hundred that I bought, and the top section would just blow out, not even with the balloon at it's full pressure. I ended up getting a refund back from bargain balloons in Canada, though that was a shit fight, but glad I received a refund.

    Around 2018 my friends and I were in the city for a bit of a walk around, He was into Comics, as we visited Kings Comics on Pitt street. They had some huge 28 inch Captain America Shields at the back of the counter. Upon feeling that wonderful rush inside, I immediately asked where they could be ordered from. They mentioned Bargain balloons from Canada. They of course had to on sell at a high price to make some profit margin, but I thought I'd at least buy a few to try out, before purchasing a whole heap from overseas. Again, the three I purchased all had pinhole leaks, and were absolutely useless.

    Ultimately, I know I have this massive, massive, massive urge for foil and mylar inflates, and would love to get some custom shapes, such as Manga heads, and cartoon comic heads, which I've designed in Adobe, but my bad luck has completely turned me right off foil and mylar balloons.

    I've pretty much have reverted to going back to the hassle of trying to get foil bags from unbroken Spring Water casks. So does anyone know that if this is just a quality control issue with Anagram? I did buy some champagne bottles off ebay from a UK seller around 2013, upon arrival I saw they were made by Flex Metal;, but thought they were as tough as steal, the foil was hard, stiff, and rough with no flexing. They were useless and gave zero arousal, ended up giving the unused ones to charity.



    Last edited by Big Thud Joe; 05-01-2026, 05:29.
  • erictom333
    Member
    • Jan 2025
    • 97

    #2
    If you want to get custom foil balloons, you'll need to order thousands. I have been in contact with multiple producers on Alibaba and all of them have a MOQ of 1000 or more for custom designs. However, they are very cheap on a per-balloon basis (between 1 and 5 USD per balloon), and they can be made pretty big (some manufacturers can make balloons up to 1.5m in size). I'd only really consider it if it was a group order, so that we would be able to split the cost multiple ways.Personally, I'd be interested in jumbo (almost life sized, big enough to lie on or hug with my arms and legs) foil balloons of some of my favourite video game and anime characters, such as:
    • Zelda (The Legend of Zelda: Breath of the Wild)
    • Tracer (Overwatch)
    • Elisanne (Dragalia Lost)
    • Amber (Genshin Impact)
    • Byleth (Fire Emblem: Three Houses)
    • Meggy (SMG4)
    • Ochako Uraraka (My Hero Academia)
    • Chiaki Nanami (Danganronpa)
    • Suzuki Rion (I Want to be Praised by a Gal Gamer)

    Comment

    • Big Thud Joe
      Senior Member
      • May 2017
      • 407

      #3
      Originally posted by erictom333
      • Zelda (The Legend of Zelda: Breath of the Wild)
      • Tracer (Overwatch)
      • Amber (Genshin Impact)
      • Meggy (SMG4)
      I'd be open to going into a shared buy. I'd just done a quick google image search on the above characters, I'm not really familiar with current video game play, video game play in our day was Intellivision and Commodore 64.

      I know these factories do have high MOQs, which in a way is not so much a problem within it self, but if one is going to go into a project with such parameters, you want to be confident that each balloon you inflate, the sides are not just going to blow out either during inflation, or during use. As far as Alibaba, one design that had always caught my eye are the HUGE WEDDING RINGS, but how they were being sold through ebay, a few dozen sold, then user account changes just threw some red flagts.

      One thing I forgot to mention yesterday is these balloons in florists, newsagencies, toy shops, and variety stores seem to be inflated nice and hard and firm, so obviously the structure of these balloons can withstand the pressure. The balloons I've come to use for the most part just haven't been able to.

      Ultimately, like the manufacturing of PVC inflatables, just wondering if they are different methods of sealing the seams of a foil balloon, I'm surmising most of the Anagram balloons I've had are bonded using some form of glue that seems to break down over time, weakening the strength of the seams?

      Anyway, if you have some vectors of the above characters like .eps or .ai files, maybe I can look into it. THe only thing I'd be concerned about the characters you noted is some of them have some stray parts that come out like a sword, not sure if that is going to introduce some vulnerability to the design.

      All in all in the end, yes, provided the quality control is there, and it is the nice mirror gloss finish, rather then the semi frosted matte finish, then these characters do look quite inviting to play with, would love to take the Zelda to bed, tall and thin, perfect design.


      Comment

      • erictom333
        Member
        • Jan 2025
        • 97

        #4
        Originally posted by Big Thud Joe
        Anyway, if you have some vectors of the above characters like .eps or .ai files, maybe I can look into it. THe only thing I'd be concerned about the characters you noted is some of them have some stray parts that come out like a sword, not sure if that is going to introduce some vulnerability to the design.
        waifus image.jpg
        This is what each of them looks like; I don't have any vector images, but if I were to get them printed I'd likely commission an artist for an image specifically made for this (the cost of art would be much less than the cost of the balloons).

        Comment

        • Big Thud Joe
          Senior Member
          • May 2017
          • 407

          #5
          The middle one on the lower row looks very interesting. The one I had in mind the other day was this one of Tracer, though I would think some modifications from an artist would have to be made to push in the extraneous parts, as such thin protruding shapes may introduce weaknesses structurally. I'm surmising this may have been the issue with my Daffy Duck heads.

          Comment

          • erictom333
            Member
            • Jan 2025
            • 97

            #6
            Originally posted by Big Thud Joe
            The middle one on the lower row looks very interesting. The one I had in mind the other day was this one of Tracer, though I would think some modifications from an artist would have to be made to push in the extraneous parts, as such thin protruding shapes may introduce weaknesses structurally. I'm surmising this may have been the issue with my Daffy Duck heads.

            https://static.wikia.nocookie.net/ov...20241102134907
            The link doesn't work. Out of curiosity, what was your experience with the Daffy Duck heads?

            Comment

            • Big Thud Joe
              Senior Member
              • May 2017
              • 407

              #7
              Ok, let's try this.



              As per Daffy Duck, a seller had half a dozen of them on ebay around 2007. I bought all six. The first one I inflated okay, poked the front orangey nose around in crutch feeling all intense and all that, then about half hour later started hearing pssss sound for a few seconds, then a rapid rip in the mylar (yellow ring), where the entire balloon lost all it's air, pretty much the mylar ripping like paper. It was this design....



              The remaining five ripped open immediately on inflation in exact same spot.

              Comment

              Working...