Are inflatables losing quality

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Latex_lover26
    Junior Member
    • Feb 2025
    • 13

    Are inflatables losing quality

    Remember when inflatables were fun back in the 80s ,90s 2000s 2010s ?
    It's not the same like they used to be
  • Guest

    #2
    Is it to do with the phthalates used in the vinyl these days, to make them non toxic, but also, less stretchy?

    I recall 80s and 90s inflatables were often very pliable and soft, and incredibly stretchy. They could stretch a lot and keep taking on more and more air till they looked impossibly bloated.

    However, I find that the vinyl used today is much stiffer and doesn't stretch.

    Comment

    • PVC Vinyl Enthusiast
      PVC Fetish
      • Jan 2013
      • 197

      #3
      It's the rubbish 6P-free PVC being used. Whatever non-phthalate plasticizers the factories are using, they simply do not give the same result, and it really annoys me. I would'nt mind if the non-phthalate plasticizers (adipates, citrates, terephthalates, etc) gave a comparable result to phthalate plasticizers, but they don't: the PVC lacks the 'gummy' softness I recall from the 1990s and early 2000s.

      The thing is; phthalate has become a 'dirty word' of sorts- the mention of it triggers a knee-jerk response: "evil, toxic phthalates!". These uninformed people, which includes the government bureaucrats, lump phthalates all together as if they are one and the same (they are not: there are two classes of phthalates; the Low Molecular Weight phthalates and the High Molecular Weight phthalates).

      The real-world toxicity of phthalates in everyday life (outside of a laboratory) is blown out of proportion. It is exaggerated. But the fact of the matter is that the High Molecular Weight phthalates, such as DINP and DIDP, are demonstrably safe, and they perform just as well as the Low Molecular Weight phthlates like DEHP, which were phased out in the 1980s. In fact, because the High Molecular Weight phthalates, such as DINP and DIDP, have a branched chemical structure, they have excellent compatability with PVC, and they do not migrate out of the PVC anywhere near as easily as the Low Molecular Weight phthalates do.

      The Chinese factories could use DINP in PVC for inflatables, and it would not breach any EU legislation provided that the inflatable is not intended for babies or toddlers, and that it is too large for the baby or toddler to place it in the mouth. So, I can understand banning all phthalates in, say, a baby's pacifier/dummy or a plastic floating duck, but there is not reason why inflatables intended for older children and adults can't still use a safe High Molecular Weight phthalate like DINP.
      Last edited by PVC Vinyl Enthusiast; 18-03-2025, 09:44.
      Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

      Comment

      • heaviest
        Senior Member
        • Jun 2018
        • 914

        #4
        The only thing I miss is opaque, shiny vinyl. Vinyl that is BOTH opaque and shiny. It's a texture/aesthetic thing.

        I don't get the softness thing. What are you talking about? There are at least a couple threads where people express a preference for inflatables blown really hard. Do the same people also miss soft, stretchy vinyl, or are those two different camps?

        I find that modern inflatables are stretchy if they are made of thin vinyl and not so stretchy if they aren't. Was that any different in the past? I've been around a long time, but my preference has always been for beach balls, air mattresses and swim rings. Simple stuff. I used to like chairs and sofas, too, and found they were thick and stiff and not very stretchy at all. Same with large, multi-person floats. Am I mis-remembering?

        Air mattresses. All my favorites have a clear, translucent or printed clear top surface. I like the smoothness of it, particularly the all-clear ones. The bottom, opaque, matte surface isn't so smooth. I don't remember air mattresses ever being made of a smooth, shiny, opaque material. Am I mis-remembering? The top, clear, smooth surface is stretchy if the thing is flimsy, and not so stretchy if it's made to hold more weight. I find that it takes a LOT of weight to get a runaway stretch out of a sturdy one-person air mattress, but put it in the hot sun and it may stretch. And two-person air mattresses have always and still are made of material that just doesn't stretch easily. Am I mis-remembering? I'd love for air mattresses to be made out of opaque, shiny vinyl, but I don't remember them ever being that way.

        Swim rings. These I DO remember being made of opaque, shiny vinyl. Those I miss. But modern ones are made like the air mattresses. Clear, translucent or printed clear tops that are stretchy on the small rings and not so stretchy on the large rings. And the bottom material is an uninteresting matte material that is also stretchy on the small rings and not so stretchy on the large rings. But there are matte rings, like the Intex tire, that are entirely opaque matte. I find them uninteresting, and too stretchy to be useful. They just stretch and stretch until they leak.

        Beach balls. There used to be two kinds, and maybe still is. One was a matte material that stretched and stretched until it leaked. And the other the standard shiny multi-color. I find the modern ones may or may not be similar to the old ones, I really don't remember, but I find they stretch about like they always have. Am I mis-remembering? I know the Intex balls with every other panel clear were particularly soft and stretchy. I found that a mixed blessing. And I don't think they make them any more.

        Printed, opaque floats. These are a lot more common than they used to be, right? I find them a mixed bag. I prefer smooth, shiny material, and the printed floats are not that. But some of them are still quite nice. The Intex Instagram-compatible floats are nice. The French Fry float is one of my favorites. The fun of these is the tightness and the thickness and the marveling that they don't explode with so much weight on them. For the feel, I prefer a float with a clear or translucent top.

        Basically, I like my inflatables to be firm under me. I keep adding air as they stretch. If they stretch too much they just develop a leak, and that's no fun. I like to spend time marveling that just air and thin vinyl gets so hard and somehow doesn't pop. It's the whole basis of my pleasure.

        I think what I like about the transparent or translucent vinyl over the matte opaque stuff is the grippyness of it. You can make that popping, boomy noise by rubbing your skin over it. The matte stuff will do that when it's wet, and to a limited degree when its not, but it's never as good as the grippy, smooth transparent vinyl. They used to make opaque, shiny vinyl like that, too.

        TLDR I miss the shiny, opaque vinyl they used to make rings out of. Other than that, I find modern inflatables are comparable to old ones.
        Last edited by heaviest; 18-03-2025, 14:42.

        Comment

        • ricky
          Member
          • May 2017
          • 95

          #5
          They definitely peaked in the 90s and early 2000s, after that there's not much out there that has soft but durable PVC. It's led me to scour Facebook Marketplace in search of to good vintage stuff. Only good new stuff I bought has been PuffyPaws, but now they're in deep financial trouble due to theft from a supplier. Also the Bestway islands currently in stores are pretty nice if you like durable inflatables that aren't as stretchy. If you heat them up in the hot sun they get a lot softer and feel pretty nice.

          Comment

          • snh61
            Senior Member
            • Sep 2017
            • 133

            #6
            I think that is not a difficult question t oanswer: Yes, I'd say, inflatables are losing quality. Especially the brand name ones. Lets forget the phtalate thing, I think that has zero to none influence on quality, that is just difference in feel for some user, but I would not consider that a quality difference.

            What I do consider to be a quality issue, is for example vinyl thickness and especially weld seam quality and durability and overall design considerations. For example: Almost for sure all new inflatables are made from thinner vinyl, than I remember some years ago. That would not be the main quality issue however, even the thinner vinyl is pretty strong, as long as the seams and welds are done good and proper.

            One example: There is a huge market of "extra safe" and "ultra this or that" swim wings, from various asian and western brands. I have played and abused a lot of these and I can confidently say, that the asian ones, even the cheap ones, are considerable better quality, than overpriced western brands.

            To give an example: One of the most praised around here brand, "Chereks" that makes round water wings for children, according to my experience, are the most expensive, yet the shittiest weld quality i have seen. They split in the seems way to easy and if you are a caring mom, I would never recommend these. Then for example, you have another pretty damn expensive brand "Flipper", that makes similar, in bright orange transparent vinyl. These do also have pretty bad seams, although not nearly bad as Cherek brand. These Flipper ones do fail in the seems a lot, developing leaks, due to bad seam design and poor quality control. I have never experienced same problems with various chinese made copies or similar designed water wings. The chinese have much better weld quality, they can be abused and inflated almost rock hard, without developing leaks or splitting seams.

            Another issue may be with poor overall design. Small chambers interconnected with large ones, creating way too much stress in the large part, while the smaller part still being too soft. Or, not considering the forces applied on the seams in a design, may lead to early failures, even from normal use without any kind of "abuse". Negative seams on inner circles may be the most prone to failures, when not done right. Also, internal reinforcements, tha ribs inside air matresses not being done right, tearing apart becasue the ends of the rib not being terminated correctly, putting way too much stress there.

            Poor material selection can be a factor, which i have noticed a lot in Intex/bestway inflatables recently. For example, inflatable mattress made two color, each side different color: One vinyl side definitely uses a thinner vinyl, than the other - once inflated firm, or a bit of sun heat applied, leads to very high shape distortions.

            One of the western companies, that according to my opinion does care a bit about quality of their inflatables, seems to be Decathlon. Those inflatables I have handled from them, seem to be quite durable and very well manufactured.

            Comment

            Working...