Durability/Resilience of Inflatable World inflatables?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Auxiliary
    Jack of all hobbies
    • Feb 2025
    • 51

    Durability/Resilience of Inflatable World inflatables?

    Couldn't find anything on this already unless I missed a post somewhere.
    How durable are the Inflatable World toys? There seems to be somewhat of conflicting reports, some saying IW toys are good to bounce on, others saying they don't last for more than a session before splitting a seam? Some saying they are the best for the money, others saying they should be inflated as little as possible to last? Some saying they can take multiple riders just fine?

    What are the limits of these toys? How much can/should they be inflated safely? How quickly will they wear out (if taken care of)? How hard can they be ridden without damaging them? (I've bought them recently so it'll be the new material)

    I'm not sure which anecdotes to take note of and how they apply, and since I recently bought some of IW's products I'd like to know rather than have to find out myself what the limits of these toys are. So far I've only inflated them to soft-not-yet-firm, but they do feel very taught when my weight is on them (70 kg / 150 lbs), is that expected/fine? I have no experience with inflatables or their limits. The shipping to my country is $120 so I'd rather not find out the hard way, tempting as it may be. I would be especially shattered if I split a seam on my small fya .
  • shrr1200
    Member
    • Aug 2021
    • 32

    #2
    Hi, proud owner of 3m blue transparent whale here. I'm much heavier and I love using it for couple plays. It's soft and bouncy, but seams are not sturdy at all. It had several holes after few rides, so I had to reinforce seams from inside. Now problem is gone, we can ride it pretty hard without worries of splitted seams.

    Comment

    • OverTheTop
      Senior Member
      • Dec 2013
      • 749

      #3
      IW toys are generally high quality for what they are, but they mostly use pinch seams, which are prone to leaks over long term use (especially for the giant toys). If you avoid overinflation and rough play you can usually avoid causing leaks, or you can take the time to repair/reinforce the toys yourself.

      IW switched factories in 2023 and tweaked some of their designs in the process, adding some extra reinforcements to known weak areas, but they're still budget toys and won't be as durable as something made with overlapping seams. Whether it's a problem is largely a matter of personal preference, depending on how comfortable you are with repairing things.

      On a side note, you can email IW and ask them to add some spare vinyl sheets to your order if you want - they have extra color-matched vinyl for all of their toys which is handy for repairs.

      Comment

      • OverTheTop
        Senior Member
        • Dec 2013
        • 749

        #4
        To add some anecdotes - I'm a similar weight to you and haven't had any of my IW toys (3.75m fyas, skunks, 3m orca, and some ride-ons) start leaking until I really pushed them, overinflating them and bouncing hard. For a small fya, I wouldn't worry too much about it.

        Comment

        • razo
          Junior Member
          • Feb 2021
          • 14

          #5
          I have an Inflatable World Angel Dragon doll and it has lasted years of riding. I weigh about the same as you (150 lbs) and I always under-inflate the doll to about 90% so that I don't stress out the seams when I am on top of the doll riding. If I know that I am going to be more vigorous, I take the air down to about 80%. My Angel Dragon inflatable doll hasn't had any problems at all. Good luck with your new inflatable!

          angel-dragon.jpg

          Comment

          • Auxiliary
            Jack of all hobbies
            • Feb 2025
            • 51

            #6
            Wow, thanks for all the replies and so quickly! It puts my mind at ease that they are at least up to scratch. Here's me replying to literally every one. If this is bad practice or weird please tell me because I'm the one Gen Z guy who has no idea how to use social sites. Just feeling chatty I guess

            Originally posted by shrr1200
            Hi, proud owner of 3m blue transparent whale here. I'm much heavier and I love using it for couple plays. It's soft and bouncy, but seams are not sturdy at all. It had several holes after few rides, so I had to reinforce seams from inside. Now problem is gone, we can ride it pretty hard without worries of splitted seams.
            Pity they spring leaks though, I'll have to keep an eye out for any of those in future. I've definitely ruminated greatly on reinforcing them, but I don't have any spare vinyl or access to any that would be up to the task (I don't think any of the cheap inflas in Australia with the crappy canvas-y vinyl would be any good for the task.), and I'd be very scared to start making incisions in them. I've toyed with the idea of maybe doing that if they get any small splits or larger holes, that way I already have a point to enter from.

            Originally posted by OverTheTop
            IW toys are generally high quality for what they are, but they mostly use pinch seams, which are prone to leaks over long term use (especially for the giant toys). If you avoid overinflation and rough play you can usually avoid causing leaks, or you can take the time to repair/reinforce the toys yourself.

            IW switched factories in 2023 and tweaked some of their designs in the process, adding some extra reinforcements to known weak areas, but they're still budget toys and won't be as durable as something made with overlapping seams. Whether it's a problem is largely a matter of personal preference, depending on how comfortable you are with repairing things.

            On a side note, you can email IW and ask them to add some spare vinyl sheets to your order if you want - they have extra color-matched vinyl for all of their toys which is handy for repairs.
            Yeah, I noticed the seams are mostly very basic. The big shark I bought (shiny one, seems like I got it right before they ran out of stock too!) has only pinch seams so that seems a little sketchy on some of the negative curves. The fya though has reinforcement of some kind (seems plastic welded even) visible from the outside and when I shine a light through it, but it does have some pretty sharp negative curves so I figure it's necessary. I'd consider myself crafty so repairing them would be no issue, if I can get the materials needed. I wish I'd have known I could get some spare vinyl from IW with the order so I could've reinforced them right away ;~;. They seem near-indestructible (under normal conditions) once reinforced.

            Originally posted by OverTheTop
            To add some anecdotes - I'm a similar weight to you and haven't had any of my IW toys (3.75m fyas, skunks, 3m orca, and some ride-ons) start leaking until I really pushed them, overinflating them and bouncing hard. For a small fya, I wouldn't worry too much about it.
            Good to have more references. Sounds like you have quite the trove of IW toys! ngl I desperately wish I had the space and privacy for the full size fya (or just more inflas in general). Imma buy one right away once I get the space (assuming IW hasn't vanished completely by then ).

            Originally posted by razo
            I have an Inflatable World Angel Dragon doll and it has lasted years of riding. I weigh about the same as you (150 lbs) and I always under-inflate the doll to about 90% so that I don't stress out the seams when I am on top of the doll riding. If I know that I am going to be more vigorous, I take the air down to about 80%. My Angel Dragon inflatable doll hasn't had any problems at all. Good luck with your new inflatable!
            How much exactly is under/overinflation exactly? I don't really have an exact reference. I assume 'fully inflated' would be just firm, wrinkles on only a few places? I also assume your Angel Dragon is made using the old materials, so a bit more sturdy, before the stories of IW toys leaking like sieves I guess. I hope to keep mine in good condition as well for as long as I can, limited by the tragic but unavoidable slow migration of the plasticizer to my bone marrow . An Angel Dragon would be cool (if they still had them) but I don't think I'd be able to explain that away if my housemates found it .

            Comment

            • razo
              Junior Member
              • Feb 2021
              • 14

              #7
              Not a bad practice at all, Auxiliary. That's what forums are for! Haha.

              To me 100% fully inflated is when there arent wrinkles on the vinyl and feels firm. (In the picture, I have Angel Dragon inflated to 100% so she can stand on her own without her legs buckling). I never really inflate my toys to 100% very often as I have accidentally split the seams of many inflatables in my younger days.

              Think of of my percentages as just rough estimates. So lets say that I want to get Angel Dragon to roughly 90% inflated. What I do is inflate her to 100% (so no wrinkles), then I let the air out for about 10 seconds and close the valve. After that, Angel Dragon still retains that fully inflated look (laying down) but she is much softer and has more "give".
              In short, your toy will last much longer if you underflate it when you are playing.

              I have a funny story about Angel Dragon. One day I was home waiting for a package to arrive. I had Angel Dragon laying on the couch in the living room as I was cleaning my apartment. Then I heard a knock on the door. I got excited thinking that it was the delivery man and opened the door without thinking twice. Turns out it was my female friend who dropped by unannounced. She walks in and sees this big blue vinyl fantasy doll laying on my couch. I am mortified at this point. She asked me "What is this big doll doing on your couch? Is it a Pokemon toy? It's so cute!" I was too embarrassed and couldn't think of a response. She then joked "Don't worry, I won't tell your parents about your blue inflatable friend ". I was totally like .

              So I know what you mean. It's hard to come up with excuses for having a big fantasy inflatable doll like Angel Dragon as opposed to a normal pool toy. But I will say, she is a lot of fun to play with!
              Last edited by razo; 26-02-2025, 22:36.

              Comment

              • Auxiliary
                Jack of all hobbies
                • Feb 2025
                • 51

                #8
                Originally posted by razo
                I have a funny story about Angel Dragon...
                Ha, that is a good story indeed! Good thing that your friend went along with it and didn't grill you too bad on it . My room doesn't have a lock on it so if any of my friends/housemates walk in on any of my inflas (we don't have a pool or ever go to one so I'd be cooked๐Ÿ’€) I'll have to remember to post the story somewhere on this forum, my embarrassment might put a smile on a strangers face.

                Comment

                • Auxiliary
                  Jack of all hobbies
                  • Feb 2025
                  • 51

                  #9
                  Actually I do have something productive to add/ask to this thread, just related to inflatable care in general I guess:

                  Is it fine to inflate inflatables by mouth? Will it affect their longevity at all, with the moisture and condensation and all?
                  I don't use a pump since none are quiet enough, plus mouth inflating allows me to savor the process even if it is a bit of work. Also does the moisture increase the risk of mold, (I live in a sub-tropical area and it grows everywhere)?
                  If moisture / mouth inflating inflatables is bad, is there any way of preventing it, or the issues that arise from it?

                  Comment

                  • razo
                    Junior Member
                    • Feb 2021
                    • 14

                    #10
                    Yes there is a chance that moisture inside the toy can potentially grow mold. My personal preference is to use air pumps just to be on the safe side. Depending on the situation, I'll use either an electric pump or a manual foot pump.

                    Electric air pump: Quicker but noisier. Probably not ideal if you are trying to be inconspicuous. But, if you know you'll have the house to yourself for a short time and want to get your big inflatable toy blown up quickly, this can come in handy. To your next door neighbors, it will just sound like a vacuum cleaner.
                    Foot air pump: This one does take longer but if you pump slowly, you'll be able to inflate your toys very quietly and still get to savor the process without risking mold growth from moisture.

                    Comment

                    • golopi
                      Member
                      • Nov 2022
                      • 61

                      #11
                      I have two of their inflatables and while they tend to be a bit fragile if you ride them rough or inflate them tight, its nothing that can't be fixed with some glue and vinyl patches, especially if you don't mind outside patchmarks.

                      So far I've repaired my Fya once due to my own fault because i accidentally poked a hole in her and once due to a pin hole on her back. I also managed to blow a tiny split in her little tail thingy by mouth but it was fixed with a tiny drop of glue. After adding some patches and reinforcements (marked in red) she's been quite airtight and can be inflated quite firm too, but her right-back leg has developed a tiny leak which i still have to sort out.

                      My griffin on the other hand, has been quite leaky. Now i think it's partly because i sorta tended to inflate it tight and figure out the limits with it needing a new patch almost every second day to a point i was almost going to give up on it and over-inflate it and pop it! But alas i decided not to give up on it yet and patched and reinforced it (marked in red) until it seemed airtight and it seems to be mostly airtight although after the latest session it surprise surprise developed another slow leak! After which i deflated it and gave up until i can be bothered to patch it again.

                      I eagerly waiting on their restock, whenever that might be. I'm kicking myself in the head for not getting the bunfoxes first time


                      image.pngโ€‹image.pngโ€‹ image.png
                      Attached Files

                      Comment

                      • Auxiliary
                        Jack of all hobbies
                        • Feb 2025
                        • 51

                        #12
                        Originally posted by golopi
                        I have two of their inflatables and while they tend to be a bit fragile if you ride them rough or inflate them tight, its nothing that can't be fixed with some glue and vinyl patches, especially if you don't mind outside patchmarks.

                        So far I've repaired my Fya once due to my own fault because i accidentally poked a hole in her and once due to a pin hole on her back. I also managed to blow a tiny split in her little tail thingy by mouth but it was fixed with a tiny drop of glue. After adding some patches and reinforcements (marked in red) she's been quite airtight and can be inflated quite firm too, but her right-back leg has developed a tiny leak which i still have to sort out.

                        My griffin on the other hand, has been quite leaky. Now i think it's partly because i sorta tended to inflate it tight and figure out the limits with it needing a new patch almost every second day to a point i was almost going to give up on it and over-inflate it and pop it! But alas i decided not to give up on it yet and patched and reinforced it (marked in red) until it seemed airtight and it seems to be mostly airtight although after the latest session it surprise surprise developed another slow leak! After which i deflated it and gave up until i can be bothered to patch it again.

                        I eagerly waiting on their restock, whenever that might be. I'm kicking myself in the head for not getting the bunfoxes first time
                        Yes. I'll have to try to find some decent vinyl somewhere to use for patching if I ever need to. I don't tend to inflate mine super tight, I don't think at least, only until the sensitive negative curves are getting tight, not the whole thing. If I patch them I'll probably do the whole job of inserting the patch into the inflatable for a near-seamless fix, since I like the pristine look.

                        That's a bummer to hear your griffin keeps developing leaks! That must be annoying. I've no experience with it, but if you're game you could just try reinforcing the whole thing? It's a real pity that the IW inflatables are so fragile if you push them even a little too hard. Would be lovely if IW offered a customization option where hey partially or fully reinforce them before shipping them to you. Thanks for including the pictures of the reinforcements. Those seams definitely look like problem areas for inflatables. Is your Fya the new design with some built-in reinforcement or is it the OG one?

                        I get what you mean by wanting to overinflate and burst your griffin after getting frustrated with it. I despise intentional popping but curiosity is eating away at me wondering just how big and chonky they'd get before they burst ๐Ÿ˜ณ. Also I also know what you mean by wanting a restock. There's always one more IW infla you always want. Apparently it's not their main business though, which is news to me.

                        And for my productive open question of the day: Is it possible to reinforce an inflatable after a seam split, or will that repaired split always be a weak point from then onwards?

                        Comment

                        • golopi
                          Member
                          • Nov 2022
                          • 61

                          #13
                          Originally posted by Auxiliary

                          Yes. I'll have to try to find some decent vinyl somewhere to use for patching if I ever need to. I don't tend to inflate mine super tight, I don't think at least, only until the sensitive negative curves are getting tight, not the whole thing. If I patch them I'll probably do the whole job of inserting the patch into the inflatable for a near-seamless fix, since I like the pristine look.

                          That's a bummer to hear your griffin keeps developing leaks! That must be annoying. I've no experience with it, but if you're game you could just try reinforcing the whole thing? It's a real pity that the IW inflatables are so fragile if you push them even a little too hard. Would be lovely if IW offered a customization option where hey partially or fully reinforce them before shipping them to you. Thanks for including the pictures of the reinforcements. Those seams definitely look like problem areas for inflatables. Is your Fya the new design with some built-in reinforcement or is it the OG one?

                          I get what you mean by wanting to overinflate and burst your griffin after getting frustrated with it. I despise intentional popping but curiosity is eating away at me wondering just how big and chonky they'd get before they burst ๐Ÿ˜ณ. Also I also know what you mean by wanting a restock. There's always one more IW infla you always want. Apparently it's not their main business though, which is news to me.

                          And for my productive open question of the day: Is it possible to reinforce an inflatable after a seam split, or will that repaired split always be a weak point from then onwards?
                          I got my Fya from the 2023 batch and it has reinforcements from the factory in pretty much the same spots as i've marked. Take that as you will if the reinforcements have have worked or not, i guess they have probably prevented something that would result in catastrophic seam splits to only tiny pinholes.
                          As for the griffin, it was kind of an impulse buy๐Ÿ˜… I expected it to be bigger but most of the length and width is taken up by the tail and legs๐Ÿ˜†! So it acts as a "testbed" of sorts for experiments and patching.
                          I totally get you with the popping and i have the same problem when it comes to curiosity! The fact that i like them quite firm doesn't really help it either!

                          As for the question of the day; I had a seam split on one of my shosu ride rolls and did a very rough and ugly outside patch to it, and when "accidentally" overinflated it again, the patch held its ground. the same couldn't be said for the other intact seam though which split open again๐Ÿ˜† But as it was sort of an freebie because of a mishap with my order i already assigned it the fate of being patch material as it was completely transparent too.

                          Comment

                          • EthylTheAardvark
                            Senior Member
                            • Nov 2016
                            • 169

                            #14
                            They're less durable than a custom toy from Hongyi, but usually more so than consumer-grade toys. For the price point they're pretty good. I'd suggest generally not inflating them to their maximum tightness, as there seems to be a huge increase in the potential for a seam split or pinhole to form between "Mostly inflated" and "Fully tight."

                            Comment

                            • Auxiliary
                              Jack of all hobbies
                              • Feb 2025
                              • 51

                              #15
                              Originally posted by EthylTheAardvark
                              They're less durable than a custom toy from Hongyi, but usually more so than consumer-grade toys. For the price point they're pretty good. I'd suggest generally not inflating them to their maximum tightness, as there seems to be a huge increase in the potential for a seam split or pinhole to form between "Mostly inflated" and "Fully tight."
                              Funny about that with the consumer inflatables. Just yesterday I worked up the courage to buy just a 'consumer grade' inflatable from the store. 9 bucks (equivalent of like 5 USD) for a 1.2m sprinkler standing dino thingy. My idea was to push it to it's limits since if it fails, no biggie, it was cheap and I can use it to practice repairs or something.
                              I inflate the thing to the point where it's firm++ (note that it isn't a very stretchy material), barely able to press a dent in it, then ride it with medium force for a good while, and nothing happened, not even a leak. Now this thing has some angry negative curves, but it was fine somehow?

                              Just obfuscates the whole situation more as to what the limits of different inflas would be, because I'm sure that either of my IW ones would've detonated under force like that. I guess I can just use reasonable caution when using my IW ones since ruining them would be pretty tragic right now. I'll keep inflating them just a medium amount and very slowly increase over a few weeks, see how much until they actually withstand before the first pinhole leak which I can easily repair, then tone it down from that point.

                              Comment

                              Working...