My only vinyl, a vintage turtle, has sprung a tiny slow leak somewhere. Probably a seam break, maybe a pinhole. I know how to find it with soapy water, my question is what common vinyl repair products in the U.S. would you recommend (or not recommend)? Thanks much.
Need repair advice
Collapse
X
-
GuestTags: None -
I have used shoe goo before that worked but it isnt as easy to get in UK. You could use HH-66 Vinyl Cement that works too. -
Guest -
I've tried Shoe Goo and found that it doesn't reliably stick to inflatables, though other people's experience may differ. HH-66 vinyl cement with a patch cut from a discarded toy works really well - find something to hold the patch in place, like weighing it down with books or clamping it with something. In Europe I'm a big fan of "Dr Boat" adhesive which I use for all my inflatable maintenance now.Comment
-
Guest -
I have a _very_ old Intex dolphin which I had bought second hand (manufactured in the year 2000 I think or so). Although it was quasi new (it has probably never been inflated before), after having inflated it I noticed that the valve caps had a tendency of opening by themselves. What should I do with them? I can still play with the toy but not in the water.Comment
-
Yes, toluene is a good solvent for PVC and, also, the paintwork, so it could damage the vinyl (i.e. weaken the vinyl at the application area) and irreparably smudge the paint. It may also dissolve the plasticizers, causing the plasticizer to leach out from the PVC and, ultimately, lead to embrittlement.
What I find works well for small holes is a product called 'Lupo Liquid PVC' (Lupo is the brand name). It dries to leave a clear and flexible seal over the puncture. I used it to repair a hole in a 1990s-era inflatable sofa, which are sadly now as common as hen's teeth. The hole was caused by Dutch Customs (called Douane) mishandling the parcel: they opened up the parcel for inspection and used a sharp blade to make a ~ 0.5 cm cut into the vinyl.
I was annoyed at Douane for mishandling my parcel and damaging my inflatable (my annoyance accounts for the handwritten expletives note in the second photo). I managed to find an email contact for Douane, and I sent them an email to ask for an explanation (enclosing photos of the damage they did to both the cardboard parcel and the inflatable contents), but I predictably got no reply from them.
Anyway, with the seal over the puncture, following application of the 'Lupo' Liquid PVC, the inflatable sofa now appears not to have any leaks.Last edited by PVC Vinyl Enthusiast; 14-12-2024, 20:53.Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.Comment
-
HH-66 seems to be completely unaccessible in my country. I use Bison Vinyl Plastic glue which seems to be good but I don't know how long it will last. My newer Intex dolphin sprung another leak, this time on the other side. More to say, I messed it up a little bit because _way_ more glue has run out of the tube than expected. Therefore, even the PVC around the patch became soft...
...
The toy is OK now and it holds air but I have to say goodbye to him for now (getting back to work). However, the only way to make the old one suitable for water seems to be to replace the valves altogether which is gonna cost a lot of time.Last edited by zycram; 01-01-2025, 22:33.Comment
Comment