DINP & PTBC

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AlterPlatzer
    Senior Member
    • Jun 2024
    • 1528

    DINP & PTBC

    So I see this mentioned and I'm curious about this.

    Yes, I really enjoy vinyl inflatables, but what will these chemicals do to enhance my enjoyment?

    I know they stopped putting phthalates in vinyl inflatable some time ago which makes them less soft to the touch. I imagine that treating your inflatables with these chemicals will make them softer, but what else? Are they stretchier or bouncier?

    Could someone share their insights about this?
    It's OK to love balloons.
    There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.
  • PVC Vinyl Enthusiast
    PVC Fetish
    • Jan 2013
    • 197

    #2
    Originally posted by AlterPlatzer
    So I see this mentioned and I'm curious about this.

    Yes, I really enjoy vinyl inflatables, but what will these chemicals do to enhance my enjoyment?

    I know they stopped putting phthalates in vinyl inflatable some time ago which makes them less soft to the touch. I imagine that treating your inflatables with these chemicals will make them softer, but what else? Are they stretchier or bouncier?

    Could someone share their insights about this?
    Yes, a thin and even layer of DINP (Diisononyl phthalate), an oily liquid High Molecular Weight phthalate, will gradually absorb into the PVC polymer, so after about 1 week or so the 6P-free PVC inflatable will become considerably softer, more durable, and indeed bouncier.

    I plan on doing this myself. I can either order DINP directly from the suppliers or I can use my chemistry knowledge to make some DINP from scratch (it is a simple Fischer Esterification reaction between phthalic anhydride and isononyl alcohol, aka isononanol). Alternatively, I could extract DINP from a bunch of DINP-containing vinyl medical gloves, using isopropyl alcohol (aka, rubbing alcohol) as the extraction solvent.

    DEHP, a Low Molecular Weight phthalate, was used in PVC inflatables up until the late 1980s. It was a very effective plasticizer, but DINP is just as effective. I am thinking of trying DEHP to see what effects it has versus DINP, and If cannot obtain DEHP, I could make it from scratch (Fischer Esterification between phthalic anhydride and 2-ethylhexyl alcohol, aka 2-ethylhexanol)

    I think that the plasticizer also contributes to the aroma profile of PVC inflatables. Many like that 'new PVC aroma'. While DINP itself does not have much of an odour, over time it very gradually (over a period of years) undergoes hydrolytic cleavage (in presence of atmospheric moisture and humidity) back to the parent isononyl alcohol, which itself has a strong (but pleasant to many) 'sweetish' odour.

    Do you like the 'rustling' and 'squeaking' noise of certain types of PVC? DINP can enhance an effect called 'blocking', in which the 'sticky' surfaces of glossy-type PVC 'interact' with each other, producing a 'rustling' or 'squeaking' sound. I've noticed that the 6P-free PVC inflatable material does not make much noise compared to PVC containing a phthalate of one sort or another.

    I don't like the results from ATBC and PTBC: they make the PVC inflatable acquire the texture of a latex balloon. Which is fine of that's what you want, but disappointing if you want the texture of a really soft PVC inflatable.
    Last edited by PVC Vinyl Enthusiast; 10-07-2024, 17:06.
    Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

    Comment

    • AlterPlatzer
      Senior Member
      • Jun 2024
      • 1528

      #3
      I think I can figure out the chemistry. Thank you for the details. I have some experience with organic peroxides, but not polymers.

      This could be a pipedream, but one thing that I would like to achieve with treating vinyl inflatable furniture is to make it possible to bounce on latex balloons on it.

      It seems that balloons pop way too easily when when you sit on them on inflatable furniture. This is a problem with vinyl and not other surfaces.

      Looking at chemical suppliers, there seem to be a few options for the solvent, i.e.: methanol, hexane, and iso-octane. Any recommendations on that?
      Last edited by AlterPlatzer; 10-07-2024, 17:52.
      It's OK to love balloons.
      There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

      Comment

      • PVC Vinyl Enthusiast
        PVC Fetish
        • Jan 2013
        • 197

        #4
        Originally posted by AlterPlatzer
        I think I can figure out the chemistry. Thank you for the details. I have some experience with organic peroxides, but not polymers.

        This could be a pipedream, but one thing that I would like to achieve with treating vinyl inflatable furniture is to make it possible to bounce on latex balloons on it.

        It seems that balloons pop way too easily when when you sit on them on inflatable furniture. This is a problem with other surfaces. Only vinyl.
        The huge Cattex Crystal balloons have a LOT of 'give' in them. I can't see them bursting easily if you were to bounce on them on top of a PVC inflatable furniture. Ordinary party ballooons are way more fragile. Give the huge Cattex ballons a try! Or perhaps you could bounce on a SHOSU Ride Roll on top of inflatable furniture?
        Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

        Comment

        • AlterPlatzer
          Senior Member
          • Jun 2024
          • 1528

          #5
          Not what I want to do.

          I like sit popping balloons in the 11" to 18" range and would like to prolong the bouncing before the balloon pops.

          Putting a blanket over the inflatable furniture solves the problem, but obscures the inflatable furniture. I want the vinyl visible while I bounce on the balloon.

          I'm thinking DINP in methanol is best for inflatables, but iso-octane and hexane are also available. Do you have any recommendations on that?
          It's OK to love balloons.
          There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

          Comment

          • PVC Vinyl Enthusiast
            PVC Fetish
            • Jan 2013
            • 197

            #6
            Originally posted by AlterPlatzer
            Not what I want to do.

            I like sit popping balloons in the 11" to 18" range and would like to prolong the bouncing before the balloon pops.

            Putting a blanket over the inflatable furniture solves the problem, but obscures the inflatable furniture. I want the vinyl visible while I bounce on the balloon.

            I'm thinking DINP in methanol is best for inflatables, but iso-octane and hexane are also available. Do you have any recommendations on that?
            It is not necessary to dissolve the DINP in any organic solvent, like methanol, iso-octane, hexane, etc. In fact, those organic solvents might adversely interact with other additives or dyes in the PVC. DINP is an oily viscous liquid and works perfectly when applied directly to the PVC. No solvents are needed.

            DINP can be found on Alibaba. Many vendors offer 1kg amounts (no need to order several tonnes!). If you are in the US, some chemical supply vendors can sell you DINP.
            Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

            Comment

            • AlterPlatzer
              Senior Member
              • Jun 2024
              • 1528

              #7
              I came up with this:



              The offerings from ChemDirect are all mixed in organic solvents.

              IYEecwb.png
              It's OK to love balloons.
              There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

              Comment

              • PVC Vinyl Enthusiast
                PVC Fetish
                • Jan 2013
                • 197

                #8
                Originally posted by AlterPlatzer
                I came up with this:



                The offerings from ChemDirect are all mixed in organic solvents.

                IYEecwb.png
                https://www.chemdirect.com/p/ChemD-5...ethanol-885177
                Those are DINP analytical standards: DINP dissolved in solvents for chemical analysis. No good for softening PVC. Look for high purity DINP in no solvent.
                Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

                Comment

                • AlterPlatzer
                  Senior Member
                  • Jun 2024
                  • 1528

                  #9
                  Originally posted by PVC Vinyl Enthusiast

                  Those are DINP analytical standards: DINP dissolved in solvents for chemical analysis. No good for softening PVC. Look for high purity DINP in no solvent.
                  Then would it be this one?


                  It's OK to love balloons.
                  There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

                  Comment

                  • PVC Vinyl Enthusiast
                    PVC Fetish
                    • Jan 2013
                    • 197

                    #10
                    Originally posted by AlterPlatzer
                    Yes, DINP Technical Grade
                    Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

                    Comment

                    Working...