Where Are All My Mouth Inflators at??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #76
    Originally posted by puffy cheeks
    I notice something that R_L_M pointed out in another thread is that inflatables are supposed to be blown by mouth and I have always thought that too. meaning pumps are bad for them. so if I was planning to purchase a big inflatable, I would only do it if I had someone to help me blow it up. I remember back when I had gotten my first inflatable chair, I had asked my friend that next time he came over to play video games with me if he could help me blow it up. later that year though I realized it wasn't that bad to do by myself. which is why I offered to blow up that whale and told them it wouldn't be a problem since I had done my chair at home more than once. my friends were a bit surprised when they saw the finished product though

    where there any inflatables any of you guys didn't feel confident about at first, inflating on your own? and have you guys asked for help from others?
    Yes, it was this beachball packaging that stated against mouth inflation, due to condensation marks becoming visible, however, the default method of inflation is still by mouth for most people.
    Box rear.jpg

    A lot of condensation does form inside a mouth blown item, especially around the mouthpiece. This beach ball actually had pooled condensation starting to trickle down from the mouthpiece surrounds.
    Clear ball wet1.jpg Clear ball wet3.jpg

    In terms of inflation techniques, the whole valve and cap was placed in the mouth, behind the teeth, for a better grip and fasterairflow, with the lips sealed around the valve base. We blew it up easily without asking for help nor sharing the valve, and nobody even commented on the heavily fogged up appearance. The mouthpiece was very wet when the valve was closed off and pressed into the ball, and sprung open by itself.
    Clear ball wet2.jpg Clear ball wet4.jpg

    Comment

    • puffy cheeks
      inflatable lover
      • Nov 2013
      • 243

      #77
      Originally posted by RLMI

      Yes, it was this beachball packaging that stated against mouth inflation, due to condensation marks becoming visible, however, the default method of inflation is still by mouth for most people.
      Box rear.jpg

      A lot of condensation does form inside a mouth blown item, especially around the mouthpiece. This beach ball actually had pooled condensation starting to trickle down from the mouthpiece surrounds.
      Clear ball wet1.jpg Clear ball wet3.jpg

      In terms of inflation techniques, the whole valve and cap was placed in the mouth, behind the teeth, for a better grip and fasterairflow, with the lips sealed around the valve base. We blew it up easily without asking for help nor sharing the valve, and nobody even commented on the heavily fogged up appearance. The mouthpiece was very wet when the valve was closed off and pressed into the ball, and sprung open by itself.
      Clear ball wet2.jpg Clear ball wet4.jpg
      was this info found on this clear beach ball you have pictures of condensation of?? I can kind of see that for clear inflatables and people would wonder why this would be the case. A label on a clear ball would make sense on how to inflate it so it would "look better"

      Comment

      • Guest

        #78
        Originally posted by puffy cheeks

        was this info found on this clear beach ball you have pictures of condensation of?? I can kind of see that for clear inflatables and people would wonder why this would be the case. A label on a clear ball would make sense on how to inflate it so it would "look better"
        No, the info was on a different, but also clear-panelled, beachball. I suppose not everyone would foresee the clear panels getting fogged up, hence the warning.

        But it's the condensation marks that create evidence of mouth inflation, which brought the ball to life, and makes it look so organic.

        Like even for these tri colour beachballs, where only 1 out of 3 panels is clear, they already get visibly fogged up after being mouth blown.
        Tri colour ball 3.jpg
        The way this ball was blown up, with the whole nozzle, valve cap and mouthpiece being inserted in the mouth, behind the teeth, with the lips forming a seal around the circular valve border, probably created a situation where more moisture could collect inside the valve. The mouthpiece was very wet when the ball was blown up and the valve kept springing open because the valve shaft was all wet with saliva and exhaled breath moisture. We had to wipe it down and then the person who blew it up had to blow "over" the open valve to get the saliva and moisture out.

        Tri colour ball blowing 2.jpg
        The ball was quite fogged up with breath even though it wasn't tightly blown! I wasn't keen to put my mouth on it to add air, knowing it had had lots of saliva spread across the valve.
        Tri colour inflated.jpg
        Last edited by Guest; 21-03-2026, 12:16.

        Comment

        • Ladyloonerlover
          Lover Of Mouth Inflation
          • Mar 2014
          • 372

          #79
          Originally posted by RLMI

          No, the info was on a different, but also clear-panelled, beachball. I suppose not everyone would foresee the clear panels getting fogged up, hence the warning.

          But it's the condensation marks that create evidence of mouth inflation, which brought the ball to life, and makes it look so organic.

          Like even for these tri colour beachballs, where only 1 out of 3 panels is clear, they already get visibly fogged up after being mouth blown.
          Tri colour ball 3.jpg
          The way this ball was blown up, with the whole nozzle, valve cap and mouthpiece being inserted in the mouth, behind the teeth, with the lips forming a seal around the circular valve border, probably created a situation where more moisture could collect inside the valve. The mouthpiece was very wet when the ball was blown up and the valve kept springing open because the valve shaft was all wet with saliva and exhaled breath moisture. We had to wipe it down and then the person who blew it up had to blow "over" the open valve to get the saliva and moisture out.

          Tri colour ball blowing 2.jpg
          The ball was quite fogged up with breath even though it wasn't tightly blown! I wasn't keen to put my mouth on it to add air, knowing it had had lots of saliva spread across the valve.
          Tri colour inflated.jpg
          Dam thet did quite well. Its huge

          Comment

          • Guest

            #80
            I have fond memories of swimming days at school, where everyone was asked to bring their own swim ring. Some would bring their swim rings already inflated, but others would bring them flat, to save space, and blow them up by mouth on the way to the pool.

            Of course, I brought my swim ring flat, and blew it up big and full when the time came. Sometimes I'd even just play with the valve in my mouth while walking. I was even asked to help others finish blowing their rings up, if they were struggling. Nobody even worried about the hygiene aspect of the shared valves.

            This weekend, we helped a friend prepare for a pool party at a pool and resort, and to my surprise, whilst we were setting up, the staff came over with a bag of mostly deflated swim rings for "general usage". The rings looked used and crumpled from storage, not neatly folded and deflated.
            Deflated .jpg

            Two staff members began blowing up the rings with their mouths , and gestured for us to come and help blow up more rings. Even though these were used rings, and have probably had multiple mouths on their valves, we all chipped in and started mouth inflating dozens of swim rings. None of the mouthpieces were wiped off or disinfected either.

            Within 15 minutes, the rings were all inflated, some blown up big and tight, and others barely half filled (they'd need topping up if someone were to use them). Whilst I blew mine up hard and tight every time, I couldn't help but be hyperconscious of the taste of each valve in my mouth!
            Set of rings blown 1.jpg Set of rings blown 2.jpg
            We had 2 other friends who seemed to have great lung strength, and courage to fill the rings till they couldn't stretch any more. Some of us stopped once the rings were beginning to take shape (but still had massive wrinkles), whereas others were happy to keep heaving more breaths till the vinyl stretched taut with no wrinkles, excitedly watching and feeling the tightening vinyl spread more with each exhalation.

            One lady was blowing up a pink ring, holding it in front of her face, as she filled it super full, making it swell and distort alarmingly, but it held air and firmly stayed swollen all day. The whole tube was literally so full it was curling up on itself as it expanded really big from her breath. It felt and looked rock hard as it bounced solidly on the ground when she tossed it to the pile after finishing inflation.
            Tube warped.jpg

            Another friend blew up a ring very tightly and pulled it out of her lips when she saw that it was beginning to bulge and distort from the air pressure. There was a rapid rush of pressurised escaping air as she pulled the valve from her mouth.
            Tightly blown pink tube.jpg


            Zero pops during inflation, which was good. We found that the ladies were quicker at inflating these rings - if not for sheer lung capacity, they seemed to be able to manipulate/bite/ hold the safety valves open more easily, and the ladies blew the rings consistently bigger and more swelled up than the guys!

            Comment

            • Guest

              #81
              Pool party 1.jpg

              Everyone working together to blow up inflatable rings for a pool party was lots of fun. Nobody baulked that the mouthpieces were previously used, possibly multiple times, either. Everybody just got on with the job.
              Pool party 4.jpg

              It was exciting to see the limp bags of vinyl come alive in their swollen glory as life was breathed into them. Even though overinflating wasn't on the agenda, it still took considerable breath and effort to fill up the inflatables by mouth.

              Pool party 3.jpg

              Some of us needed to take breaks to catch our breath, literally, so we relied on the safety valves doing their job and not letting air escape, when we had to remove our mouths from the valve. Pool party 2.jpg Pool party . .jpg


              Letting the ring become full and firm was so exciting, despite the mouthpieces being yellowed and stained with dried up liquid trails visible inside the clear panels, from previous inflations where too much moisture entered the valve.

              Comment

              • Guest

                #82
                Originally posted by Ladyloonerlover

                Dam thet did quite well. Its huge
                Saw a very damp and fogged up swim ring at the shop, even though it wasn't tightly inflated. There was breath condensation marks all round the inside, and the ring was for sale, and the glistening vinyl was clear evidence that the ring had been blown up with breath today. I didn't see the inflation of this ring though.
                Shop blown rings green.jpg

                The staff were mouth inflating other, smaller rings, like the Spiderman one below, which was filled quite full, also with breath. The lady was gripping the valve in her lips, past the teeth, and exhaling strong breaths, with only a hand on the inner seam, feeling for tightness. The wrinkles are starting to disappear and the ring is getting hard, but she did not stop. She kept blowing bravely till it was really big and bulging, with no wrinkles, and one half had begun to bulge ominously from the excessive air she'd exhaled into it. There was a huge rush of air escaping from the nozzle when she took her mouth off it, to close the valve.

                Shop blown rings spiderman.jpg

                It's fun to see the different rings blown up to different sizes by different people. The tightness wasn't consistent. All were for sale, and all were blown up with mouths, but which would you choose - the fully wrinkle-free and swollen one, the softer one with wrinkles, or the one which is full but not hard?
                3 rings 1.jpg
                3 rings 2.jpg

                More rings outside were wrinkle free, big and bulging, dangerously overinflated, yet still holding air, like this one. They were sold, all newly mouth inflated, blown up till they're ready to explode. I'd be afraid to float on a ring as tight as this, for fear of it bursting any moment.

                Shop blown rings pink big .jpg
                Last edited by Guest; 06-04-2026, 23:32.

                Comment

                • Hellus
                  Tough Blower
                  • Mar 2025
                  • 182

                  #83
                  Originally posted by OverTheTop

                  Definitely - Heath Dragon has a video demonstrating how to remove them: https://youtu.be/eQoV6w_nuSQ

                  If you have needle nose pliers, those make it easier than the approach shown in the video - you can push the flap up and into the valve stem a bit, then grab it through the valve with the pliers and just twist until it tears off. It only takes 30 seconds or so.
                  Hello, knocking after two years. I just moved into inflatables, and I need help in removing the safety valve. This video is now unavailable. Do you have any other resources?

                  Comment

                  • puffy cheeks
                    inflatable lover
                    • Nov 2013
                    • 243

                    #84
                    Originally posted by RLMI
                    Pool party 1.jpg

                    Everyone working together to blow up inflatable rings for a pool party was lots of fun. Nobody baulked that the mouthpieces were previously used, possibly multiple times, either. Everybody just got on with the job.
                    Pool party 4.jpg

                    It was exciting to see the limp bags of vinyl come alive in their swollen glory as life was breathed into them. Even though overinflating wasn't on the agenda, it still took considerable breath and effort to fill up the inflatables by mouth.

                    Pool party 3.jpg

                    Some of us needed to take breaks to catch our breath, literally, so we relied on the safety valves doing their job and not letting air escape, when we had to remove our mouths from the valve. Pool party 2.jpg Pool party . .jpg


                    Letting the ring become full and firm was so exciting, despite the mouthpieces being yellowed and stained with dried up liquid trails visible inside the clear panels, from previous inflations where too much moisture entered the valve.
                    I will say this, since I've had my love and fetish for blowing up inflatables and sharing valves, I have NEVER once gotten sick from doing so. granted I haven't shared any valves since my high school days but still I wouldn't be scared to do so

                    Comment

                    • Steve_inflator
                      Senior Member
                      • Aug 2013
                      • 207

                      #85
                      Originally posted by puffy cheeks

                      I will say this, since I've had my love and fetish for blowing up inflatables and sharing valves, I have NEVER once gotten sick from doing so. granted I haven't shared any valves since my high school days but still I wouldn't be scared to do so
                      Apparently, germs are spread more through bacteria on unwashed hands than through mouth and saliva contact.

                      As long as all participants are without any illness symptoms then an inflatables blowing session with people of your choosing should be harmless fun.

                      Comment

                      • Guest

                        #86
                        Saw a 36inch large ring for sale at the shop, not particularly tightly or full, but very fogged up, around the mouthpiece, suggesting that it was inflated with the mouth and filled with breath. Didn't buy it but was quite a sight to see.

                        Mouth inflation is still out there!

                        Red ring fogged .jpg

                        Comment

                        • Eno
                          Senior Member
                          • Feb 2018
                          • 206

                          #87
                          Originally posted by RLMI
                          Saw a 36inch large ring for sale at the shop, not particularly tightly or full, but very fogged up, around the mouthpiece, suggesting that it was inflated with the mouth and filled with breath. Didn't buy it but was quite a sight to see.

                          Mouth inflation is still out there!

                          Red ring fogged .jpg
                          Tempting one! Would have bought it to inflate it to the max!

                          Comment

                          • Pepertje90
                            Member
                            • Sep 2017
                            • 35

                            #88
                            Mouthinflating is still something hot! I love to keep puffing and blowing hehe. These are some toys I blew up by mouth and some of them I b2p. Always hot to see other guys filling their toys with lungpower 😈😈
                            Attached Files

                            Comment

                            • Blue548
                              Senior Member
                              • Sep 2015
                              • 118

                              #89
                              Originally posted by Pepertje90
                              Mouthinflating is still something hot! I love to keep puffing and blowing hehe. These are some toys I blew up by mouth and some of them I b2p. Always hot to see other guys filling their toys with lungpower 😈😈
                              Nice! The problem is, it is never obvious when to stop blowing!

                              Comment

                              • Hellus
                                Tough Blower
                                • Mar 2025
                                • 182

                                #90
                                Originally posted by Pepertje90
                                Mouthinflating is still something hot! I love to keep puffing and blowing hehe. These are some toys I blew up by mouth and some of them I b2p. Always hot to see other guys filling their toys with lungpower 😈😈
                                Hot!! The crocodile is about to have its last laugh!
                                Please share some b2p pictures, and/or stories.

                                Comment

                                Working...