Where Are All My Mouth Inflators at??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #16
    Yes, I've always mouth inflated beach balls and pool floats. Seeing the others in my family mouth inflate all the items made it just a normal thing for me too.

    Nothing bigger than a pool raft, though, which took about 10min altogether to get it pretty firm and swollen.

    I realised that others never really pushed the inflatables till they were hard and tight, maybe because it was to strenuous to blow them up that far by mouth, however, I'd see shops with pooltoys on display that were really bloated and swollen. So I began to try to push the inflatable pooltoys and beach balls further.

    When the items got full, I'd usually get told to stop, lest it pop. Getting a good mouth grip, with lips sealed around the base of the valve, the valve cap in my mouth, and biting on the bottom of the valve to open the safety flap made it easier to get air in.

    I recall the various pool floats and beach balls invariably getting breath condensation and becoming fogged inside, after mouth inflation. If really unlucky, there might actually be a trail of moisture trickling down inside the valve. Some family and friends would say it was yucky, but most people were glad the item was inflated. The hardest part was the final 20-30%, getting max air into the item so that it was hard and solid.

    I'd always blow up swim rings till they were wrinkle free, fat and bulging on one side.

    Comment

    • inbox_pm
      Senior Member
      • Apr 2017
      • 189

      #17
      Originally posted by RLMI
      Getting a good mouth grip, with lips sealed around the base of the valve, the valve cap in my mouth, and biting on the bottom of the valve to open the safety flap made it easier to get air in.
      I invented this method in my early childhood, about 40 years ago. Most of an USSR made toys was very small, but their valves were simple, without an internal flaps. So to close a fully inflated toy was difficult.
      IMG_20230911_203702404.jpg IMG_20230911_203716994.jpg IMG_20230911_203756058.jpg

      Originally posted by RLMI
      The hardest part was the final 20-30%, getting max air into the item so that it was hard and solid.
      It depends from a toy's size, material softness and even external temperature. For example, a big Bestway "Pop Art" ring under the summer sun stretches like balloon, absolutely don't feels when it already full. Some simple mattresses also very stretchy and even can be popped by mouth

      Originally posted by RLMI
      I'd always blow up swim rings till they were wrinkle free, fat and bulging on one side.
      Oh yes, when a toy is overinflated on edge of pop, it always looks so excitive!

      Comment

      • Ladyloonerlover
        Lover Of Mouth Inflation
        • Mar 2014
        • 372

        #18
        Nothing is more exciting than an overinflated toy.

        Comment

        • inbox_pm
          Senior Member
          • Apr 2017
          • 189

          #19
          Originally posted by Ladyloonerlover
          Nothing is more exciting than an overinflated toy.
          Completely agree!

          Comment

          • superfirmzx
            Junior Member
            • Mar 2022
            • 15

            #20
            I literally only mouth inflate, just so satisfying getting an inflatable firm against your lips. Biting down on the whole valve :3

            Not to mention the sense of an achievement blowing up a large inflatable yourself!

            Comment

            • Guest

              #21
              Originally posted by superfirmzx
              I literally only mouth inflate, just so satisfying getting an inflatable firm against your lips. Biting down on the whole valve :3

              Not to mention the sense of an achievement blowing up a large inflatable yourself!
              Yes, definitely love the thrill of feeling the inflatable becoming firm and tight as it presses against your lips and it becomes hard to blow into. Best part is to get it solid hard, for the best feel and best look. And hope that it doesn't leak.

              I blew up a 20 inch Intex swim ring in 2012 really tight, and closed the valve successfully. It was really tight. After a minute, the inner seam began hissing out air, and within a few seconds, the hissing increased, and suddenly the whole seam gave way and the swim ring exploded!

              Comment

              • puffy cheeks
                inflatable lover
                • Nov 2013
                • 243

                #22
                Originally posted by RLMI

                Yes, definitely love the thrill of feeling the inflatable becoming firm and tight as it presses against your lips and it becomes hard to blow into. Best part is to get it solid hard, for the best feel and best look. And hope that it doesn't leak.

                I blew up a 20 inch Intex swim ring in 2012 really tight, and closed the valve successfully. It was really tight. After a minute, the inner seam began hissing out air, and within a few seconds, the hissing increased, and suddenly the whole seam gave way and the swim ring exploded!
                same here. and the same thing with a ring I had. having it it press tightly against your lips feels good however, I find it is harder to bite down on the valve to put more air in. so once it gets real hard I just blow air in it without doing that

                Comment

                • inbox_pm
                  Senior Member
                  • Apr 2017
                  • 189

                  #23
                  Originally posted by RLMI

                  I blew up a 20 inch Intex swim ring in 2012 really tight, and closed the valve successfully. It was really tight. After a minute, the inner seam began hissing out air, and within a few seconds, the hissing increased, and suddenly the whole seam gave way and the swim ring exploded!
                  Yes, a rings often pops in this way. An inner seam is most loaded place of entire toy, and, of course, pops first. Even if only a small hole appears there, you can save this ring in only one way - immediately unload and deflate it and glue a narrow patch on entire seam.
                  How it looks on a rare and beautiful Bestway 91 cm ring:
                  IMG_8537.jpg IMG_8535.jpg IMG_8534.jpg IMG_8533.jpg

                  Comment

                  • puffy cheeks
                    inflatable lover
                    • Nov 2013
                    • 243

                    #24
                    Originally posted by inbox_pm
                    Yes, a rings often pops in this way. An inner seam is most loaded place of entire toy, and, of course, pops first. Even if only a small hole appears there, you can save this ring in only one way - immediately unload and deflate it and glue a narrow patch on entire seam.
                    How it looks on a rare and beautiful Bestway 91 cm ring:
                    IMG_8537.jpg IMG_8535.jpg IMG_8534.jpg IMG_8533.jpg
                    yup all my rings did that and since I had nothing or knew anyway of saving them I threw them away

                    Comment

                    • inbox_pm
                      Senior Member
                      • Apr 2017
                      • 189

                      #25
                      Originally posted by puffy cheeks

                      yup all my rings did that and since I had nothing or knew anyway of saving them I threw them away
                      This ring is just important to me. This is a souvenir from Crimea, as well as several other toys that I brought from there in the last years before the war and russian occupation. Also it's very rare, made in 2006 and I never seen this model anywhere. I used a vinyl pieces from a popped small beachball of the same color and now it's unpoppable
                      Usual small rings I love to overinflate, of course, and love to feel how they stretches under me. A good quality rings stretches a lot and makes a loud BOOM. But if an inner seam is weak and defective, a small holes can appear even in a first or a second session.

                      Comment

                      • puffy cheeks
                        inflatable lover
                        • Nov 2013
                        • 243

                        #26
                        so do you guys put the whole valve in your mouth or just the valve and leave the stopper out?

                        Comment

                        • Steve_inflator
                          Senior Member
                          • Aug 2013
                          • 207

                          #27
                          Originally posted by puffy cheeks
                          so do you guys put the whole valve in your mouth or just the valve and leave the stopper out?
                          For me it depends on the kind of valve and its size. Small to medium valves are completely engulfed with my mouth, larger valves often have the stopper out and to the side.

                          Comment

                          • puffy cheeks
                            inflatable lover
                            • Nov 2013
                            • 243

                            #28
                            Originally posted by inbox_pm
                            I invented this method in my early childhood, about 40 years ago. Most of an USSR made toys was very small, but their valves were simple, without an internal flaps. So to close a fully inflated toy was difficult.
                            IMG_20230911_203702404.jpg IMG_20230911_203716994.jpg IMG_20230911_203756058.jpg


                            It depends from a toy's size, material softness and even external temperature. For example, a big Bestway "Pop Art" ring under the summer sun stretches like balloon, absolutely don't feels when it already full. Some simple mattresses also very stretchy and even can be popped by mouth


                            Oh yes, when a toy is overinflated on edge of pop, it always looks so excitive!
                            so you painted the valve and that gave it more friction or something??

                            Comment

                            • inbox_pm
                              Senior Member
                              • Apr 2017
                              • 189

                              #29
                              Originally posted by puffy cheeks
                              so you painted the valve and that gave it more friction or something??
                              In USSR was no transparent vinyl, all toys from that period are with non-transparent valves. Sometimes of the same color as a toy itself, sometimes no.

                              Comment

                              • puffy cheeks
                                inflatable lover
                                • Nov 2013
                                • 243

                                #30
                                Originally posted by puffy cheeks
                                so you painted the valve and that gave it more friction or something??
                                oh ok I don't know or remember if I had any toys like this. were these valves easier to keep close than the clear ones? I know the tighter the toy gets the less likely the valve would stay closed. although in your pictures it does appear the toy isn't blown up real tight

                                Comment

                                Working...